http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Calcium-Orthosilicate 를 이용한 자경성 주형의 상온성질에 관하여
강인찬,문인탁,배창국 대한금속재료학회(대한금속학회) 1975 대한금속·재료학회지 Vol.13 No.3
珪酸소오다를 이용한 自硬性 鑄型에는 종류가 대단히 많다. 그 한 方法中에서 珪酸소오다에 2CaO-SiO₂(이하 C₂S 라 칭함)를 混合시키면 硬化作用이 일어나므로 常溫에서 이 反應을 利用하여 自硬性 鑄型法을 利用하게 되었다. 따라서 본 실험에서는 壓縮强度, 表面 安定性 및 殘留强度가 珪酸소오다의 mol 比나 C₂S의 混合量에 따라 變化되므로 國內産 珪砂를 使用하여 珪酸소오다는 7%를 첨가하고 C₂S는 1∼4%까지 變化시키면서 이들 性質을 측정검토하였다. 실험결과를 다음에 열거하면, 1) 造型後 12時間에서는 C₂S量이 4%까지 증가 할 수록 壓縮强度가 높았으나 그후에는 반대로 낮아졌다. 2) 최후의 壓力强度는 mol比가 낮을 경우, C₂S量이 적을 경우에 매우 높았다. 3) 表面安定性은 珪酸소오다의 mol比나 C₂S量의 변화에 따라 큰 변화는 없었다. 4) mol比 2.3의 珪酸소오다 7%와 C₂S 2∼3%를 混合한 鎭海砂의 경우에 가장 적합한 常溫性質을 얻을 수 있었다. There are many kinds of no bake self-hardening method using sodium silicate. When sodium silicate solution is mixed with calcium-orthosilicate powder hardening reaction is occured, which is based for self-hardening method at room temperature. The compression strength, surface stability and residual strength of mold are so related to the molecular ratio of sodium silicate and the content of calcium-orthosilicate powder that these properties are tested and studied, especially using domestic silicate sand, varing the content of 2CaO-SiO₂ from 1% to 4% at 7% of sodium silicate mixed. The results obtained in this study are as follows, 1) The compression strengths are getting still higher, along to the contents of 2CaO-SiO₂ up to 4% untill about 12 hours and after that time the strengths are inverted. 2) The final compression strength is much higher in case of low contents of 2CaO-SiO₂ and low molecular ratio. 3) The surface stability is not so varied along to the change of 2CaO-SiO₂ content and the molecular ratio. 4) The optimum properties can be obtained form ZIN HAE silica sand mixture at 7% of sodium silicate, molecular ratio 2.3 and 2% to 3% of 2CaO-SiO₂ powder.