http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
(활성탄/고분자바인더)복합성형체의 압출온도에 따르는 응집구조 및 유량 상관성에 관한 연구
홍성규 ( Yong Gyun Lim ),임용균 ( Young Jun Kim ),김영준 ( Sang Jin Park ),박상진 ( Sung Kyu Hong ) 한국화학공학회 2014 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.52 No.2
정수처리 방식에 있어서 소형화의 필요성이 증대됨에 따라 복합적인 기능을 갖는 단일구조 여과재 개발이 절실히 요구되고 있다. 본 연구에서는 단일구조를 가지는 필터개발을 위하여 활성탄과 고분자 바인더로 구성된 성형체를 압출소결방식으로 제조하여, 제조된 성형체의 밀도, 공극률 및 유량을 평가하여, 최대유량을 가지는 성형체의 최적 압출온도를 결정하였다. 또한 성형체의 공극률 평가에 있어서 전체 공극률뿐만 아니라 관통형 기공의 공극률을 추가로 평가하여 유량과의 상관성을 평가하였다. 압출온도가 고분자 바인더의 Melting point인 133 oC 이상인 140~230 oC에서단일구조 복합 활성탄 성형체 구성이 가능하였으며, 압출온도 170 oC가 복합성형체의 밀도가 낮고, 관통기공의 공극률이 높아, 최대유량을 가지는 복합성형체의 제조가 가능한 최적 압출온도로 확인되었다. 또한 복합성형체를 통해 흐르는 물의 유량은 성형체의 전체 공극률 보다 관통형 기공의 공극률에 크게 의존함을 알 수 있었다. As the need for miniaturization in water purification filter increases, the development of filter media for single filtration with multiple function was strongly required. In this study, the molded activated carbon composed of single un it was manufactured by extrusion-sintering process, and then the flow rate, density and porosity were investigated using the molded activated carbon manufactured at various extrusion temperature. We confirmed that it was possible to manufacture the single unit-molded activated carbon when the extrusion temperature was 140~230 oC more than 133 oC being of polymer binder melting point, and the optimal extrusion temperature for the molded activated carbon with maximum flow rate was 170 oC since the molded activated carbon had low density and high through porosity. Also we confirmed that the flow rate through the molded activated carbon was strongly dependent upon through pore porosity compared to total porosity for the molded activated carbon.
Micro-shear bond strength of resin-modified glass ionomer and resin-based adhesives to dentin
Hong, Hyun-Kyung,Choi, Kyoung-Kyu,Park, Sang-Hyuk,Park, Sang-Jin 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.4
이 연구의 목적은 수종 상아질 접착 시스템과 복합 레진 및 resin-modified glass ionomer를 상아질 표면에 접착하여 재료 및 상아질내 위치에 따른 미세전단결합강도를 측정, 비교하는 것이다. 상아질 접착 시스템으로는, 3-step인 Scotchbond Multi-Purpose Plus, 2-step 인 Single Bond와 자가 부식형 시스템인 Clearfil SE Bond를, 1-step인 Prompt L-Pop을 사용하였다. 이와 함께 hybrid type의 복합 레진인 Clearfil AP-X와 Z250을 사용하였으며 resin-modified glass ionomer로는 Fuji Ⅱ LC를 사용하였다. 상악 소구치를 치아의 근원심 중앙부를 절단하여 상아질면을 노출시켰다. 5개 실험군으로 분류하고 상아질면을 위치에 따라 치관부의 occlusal1/3, middle1/3, cervical/1/3과 치근부로 구분지어 시편을 부착하였다. 미세전단결합강도측정은 Universal testing machine(EZ-test ; Shimadzu, Japan)에서 측정하였다. Occlusal 1 / 3 부위에서는 SE가 가장 높은 값을, SM과 SB간에는 유의차가 없었으며, PL, GI순으로, Middle 1 / 3 부 위에서는 SM ≥ SE ≥ SB ≥PL ≥ GI 순으로, cervical 1 / 3 부위에서는 SM, SE, SB간에 유의차가 없었다. Root dentin에서는 SM이 가장 높은 값을 보였으며 SE, PL, GI간에 유의차가 없었다. SE만이 치관부 상아질에 비해 치근부에서 유의할만한 결합강도의 감소를 나타냈다(p<0.05). GI는 치관부 상아질에서는 다른 군에 비해 유의성 있게 낮은 결합강도를 보였으나 치근부에서는 SE, PL과 유의차가 없었다.