본 논문은 가구와 목재건축물을 이루고 있는 부재들간의 짜임새와 이음새들을 파악하여 비교ㆍ분석하고, 결구법들의 유사점과 차이점을 찾아내어 고건축물에는 많은 짜임새들이ㅣ 사용되...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=T2146731
부산 : 동아대학교 교육대학원, 1996
학위논문(석사) -- 동아대학교 교육대학원 , 공예교육전공 , 1996. 2
1996
한국어
634.2 판사항(4)
745.51 판사항(19)
부산
v, 80p. : 삽도,도판 ; 26cm
참고문헌: p. 61-62
0
상세조회0
다운로드본 논문은 가구와 목재건축물을 이루고 있는 부재들간의 짜임새와 이음새들을 파악하여 비교ㆍ분석하고, 결구법들의 유사점과 차이점을 찾아내어 고건축물에는 많은 짜임새들이ㅣ 사용되...
본 논문은 가구와 목재건축물을 이루고 있는 부재들간의 짜임새와 이음새들을 파악하여 비교ㆍ분석하고, 결구법들의 유사점과 차이점을 찾아내어 고건축물에는 많은 짜임새들이ㅣ 사용되어졌으나 목가구의 짜임새에 사용되지 않았던 짜임을 찾아내어 보고, 찾아낸 짜임들을 몇가지 선정하여 목가구의 구조적인 장식효과와 아름다움은 물론 실용성과 조형적 효과를 시각적으로 받아들 일 수 있는 결구법을 찾아내어 제안하는데 그 목적이 있다.
조선시대 전후의 목조건축물중 불사건축물로 양산통도사와 부산범어사의 신축ㆍ보수공사 현장을 답사하여 목조건축물의 각 부위별 결구법을 찾아내어 조사하였고, 그 공사현장에 있던 문화재 보수지정자 김 만국씨의 대담내용을 보조자료로 채택하였다.
조선후기의 한옥으로는 현재 문화재로 지정된 경상남도 산청의 박갑동, 박우동, 최재기, 조동윤, 이씨댁 등을 방문하여 지붕, 기둥, 벽체, 초석과 기둥부를 조사하여 부위별 사진을 도판으로 사용하는 방법을 취했다.
그리고 조선시대 가구에 관한 조사가 선행되어야 하겠지만, 전란으로 인한 초기의 작품은 극히 소수여서 조선시대후기에 일반적으로 널리 사용되었던 대표적인 목가구중 장을 대상으로 하여 각 부위별 결구법을 분석한 결과 건축물에 사용된 94가지의 결구방법 중 현재 사용되고 있는 결구법은 절반도 못되는 실정이며 목가구에 사용된 50여가지의 결구방법 중 현재 사용되고 있는 결구법으로는 30여가지 전후로 사용되어지고 있으며 목조건축물에서의 결구방법과 목가구의 짜임이 매우 유사한점을 찾아볼 수 있었다. 그리고 사라져가는 결구법들을 찾아내어 목가구에서는 사용되지 않고 건축물에만 사용되었던 맞춤, 이음, 붙임들을 찾아내어 현대 목가구작품에 사용 가능한 결구들을 15가지 선정하여 가구의 구성에서 내부에 사용된 맞춤기법과 외부로 돌출된 맞춤 기법에 관하여 연구한 결과 갈퀴맞춤 산지치기, 나비은장 맞춤, 원두나비장쪽매, 방두산지, 상추(촉)이음, 가름장맞춤, 자축이음, 엇빗이음, 내림주먹장 맞춤, 십자쌍촉음, 통맞춤, 거멀띠장쪽매, 내외주먹장맞춤, 혀물림장부맞춤, 막이산지 등 15가지 있다. 그 중 갈퀴맞춤산지치가. 나비은장맞춤, 메뚜기산지 등 3가지의 결구법을 사용하여 제작해 봄으로써 시각적인 안정감과 조립 또는 해체가 되는 맞춤기법으로 결구의 구조미를 육안으로 확인할 수 있으며, 견고하면서도 그것으로 인한 구조적인 장식효과와 아름다움을 찾아 볼 수 있었다.
그러므로 앞으로 우리나라의 전통목가구연구에 보탬이 되기를 바라며, 사라져가는 목조건축물의 결구법들이 보완되어져서 구조적인 조형미를 갖춘 가구가 거듭 연구되어야 할 것이다.
다국어 초록 (Multilingual Abstract)
This thesis is to study on the truss of wood- architecture and wood-furniture. We can be very high important degree that truss occupies in architectures because the wood-architecture and wood-furniture made up by truss of joint, attachment. As the jo...
This thesis is to study on the truss of wood- architecture and wood-furniture. We can be very high important degree that truss occupies in architectures because the wood-architecture and wood-furniture made up by truss of joint, attachment.
As the joint-techniques of Korea's wood-architecture and traditional wood-furniture make up in the simple line and clear, fine surface, it made up in techniques considering the visual effect the structure science in its use, nature of materials and stress received in each parts. We can give more higher fidelity in inner and beauty in outer as making up be strong joint-techniques in inner without showing mostly outer.
We can see to find the joint, attachment among sub-materials being made up furniture and wood architectures in the results analyzing in figures as such <figure 2>, <figure 3>, <figure 4>, <figure 5>, <figure 6>, <figure 7>, <figure 8>, and <figure 9>.
In this paper, We can know that first, the truss among 94 truss method used the surveyed architecture didn't occupy less half of whole, second, only 30 truss used among 50 truss method in wood furniture was used, third there had the similar truss between truss method in the wood-architecture and joint in the wood-furniture.
Finding the joint, attachment, and so on used in only architecture not wood-furniture, studying on the joint techiques used inner and the joint techniques convexed outer in the framework of furniture selecting the useful 15 truss in the works of wood furnitue, We can give conclusion to that in structure, it is good to only stong itself regardless where it uses, in formative aspect, it is important to joint technique itself, but the harmony of overall furniture and its techinques are important.
And as such <figure -10>, the results of formative beauty And the conclusion
목차 (Table of Contents)