본 연구는 양변리 백제 토기요를 바탕으로 5세기 후반 백제 토기요의 특징을 살펴보는데 목적이 있다. 이를 위해서 필자가 직접 조사한 양변리 백제 토기요지를 분석한 후 이와 동시기의 것...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
본 연구는 양변리 백제 토기요를 바탕으로 5세기 후반 백제 토기요의 특징을 살펴보는데 목적이 있다. 이를 위해서 필자가 직접 조사한 양변리 백제 토기요지를 분석한 후 이와 동시기의 것...
본 연구는 양변리 백제 토기요를 바탕으로 5세기 후반 백제 토기요의 특징을 살펴보는데 목적이 있다. 이를 위해서 필자가 직접 조사한 양변리 백제 토기요지를 분석한 후 이와 동시기의 것들과 비교ㆍ분석하여 특징을 추출하고자 하였다. Ⅱ장에서 양변리 유적과 토기요지에 대한 현황을 살펴보았으며, Ⅲ장에서는 양변리 토기요, 부대시설, 유물 등에 대하여 분석을 실시하여 5세기 후반으로 편년하였다. 그리고 Ⅳ장에서는 Ⅲ장에서 분석한 양변리 토기요와 동시기의 토기요(매성리, 소동리)를 비교ㆍ분석한 후, 5세기 후반 백제 토기요의 특징을 파악하였다. 따라서 본 장에서는 필자의 주요 의견이 나타나 있는 Ⅳ장의 내용을 중심으로 정리하고 향후 연구과제를 모색하는 것으로 대신하고자 한다.
ⅡㆍⅢ장을 통해서 양변리 백제 토기요의 편년을 5세기 후반으로 설정하였으며, 이와 동시기의 자료를 분석하던 중 천안 매성리와 아산 소동리 토기요들과 매우 유사한 것으로 확인되었다. 분석대상은 총 6기(매성리:2기, 소동리:3기, 양변리:1기)이며, 각각의 편년은 보고서에서 제시한 연대를 참고하였으나, 매성리의 경우는 연대 폭이 넓게 설정되어 5세기 후반으로 재설정하였다.
입지는 물, 점토, 연료를 획득하기에 양호한 곳을 선정함에 있어 유사한 양상이 확인되나 해발고도, 사면향, 장축과 같은 요소들은 각각 다른양상을 보이고 있다. 이러한 현상은 토기요가 입지하는데 있어서 물, 점토, 연료의 획득이 주요 고려사항이고, 나머지 요소들은 선택사항인 것으로 판단된다.
축조방식은 지하식, 반지하식이 모두 확인되며, 평면형태는 타원형계가 주를 이루고 있다. 규모는 대형, 중형, 소형이 모두 확인된다. 세부구조는 크게 요전부, 연소부, 소성부, 연도부로 구분하여 분석하였고, 이 외에 부대시설과 유물을 각각 살펴보았다. 요전부는 토기요 하단부에 위치하는 것으로 추정되나 부분적으로 유실되어 정확한 양상을 파악하기가 어렵다. 다만 소동리 1~3호에서 확인되고 있어 대략적인 형태와 규모를 파악할 수 있었다. 대체로 평면형태와 규모에서 유사점은 찾아볼 수 없었으며, 이는 각각의 축조자의 의도나 토기요를 축조할 당시 주변환경에 맞게 요전부를 설치한 것으로 볼 수 있다. 연소부는 방형계의 평면형태가 우세하게 확인되며, 규모는 대체로 200cm 정도를 유지한 것으로 파악하였다. 다만 소동리 2호와 양변리 토기요의 연소부 구조가 수직연소식에서 수평연소식으로 변화하는 것이 확인된다. 그리고 단면형태도 기본적으로 수직유단식 구조를 보이고 있으나, 연소부 구조와 마찬가지로 수직유단식에서 수평유단식으로 변화하는 모습이 소동리 2호와 양변리 토기요에서 확인되고 있어 매우 주목된다.
소성부는 타원형계가 주를 이루고 있으며, 규모는 토기요마다 다르게 나타난다. 특히 요상형태가 크고 작은 홈이 확인되어 매우 특징적이다. 전체적으로 크고 작은 홈들이 열을 지어서 확인되는데, 소동리 1ㆍ2ㆍ3호와 양변리 토기요 소성부가 다른 토기요들에 비해 정연하게 잘 남아있다. 요상경사는 10~20°가 가장 안정적인 경사로 잘 알려져 있으나, 5세기 후반 백제 토기요의 요상경사는 전체적으로 20~30° 사이에서 확인되고 있어 사뭇 다른양상을 보이고 있다. 이러한 차이점에 대한 원인을 추정해보면 시기변천에 따른 변화, 불을 자유롭게 조절할 수 있는 소성기술의 발달의 결과, 토기요가 입지하는 지형조건에 따른 지역적 차이로 볼 수 있겠으나, 현재로서는 정확한 원인을 파악할 수 없었다.
연도부는 경사형, 단+경사형, 수직형으로 구분된다. 경사형은 매성리 1호와 양변리에서 확인되며, 단+경사형은 매성리 2호, 수직형은 소동리 1ㆍ2ㆍ3호에서 각각 확인된다. 수량적으로는 수직형>경사형>단+경사형의 순으로 확인된다. 대체로 연도부의 구조차이가 토기요의 변화양상과는 관계가 없는 것으로 판단되며, 토기요의 구조나 지형조건에 맞게 설치한 것으로 판단하였다.
이외에 부대시설로 공방지, 폐기장, 건조장, 채토장 등을 살펴보았으나, 양변리 토기요 주변에서만 모두 확인되었다. 여타 유적들은 조사면적의 협소 혹은 지형삭평 등을 이유로 들어 존재만 추정하고 있다. 현재까지의 자료들만 가지고 부대시설의 존재여부를 파악하기는 힘들 것이며, 향후 자료증가를 기대해야할 것이다.
유물은 완형으로 출토되는 경우는 극히 드물고, 편으로만 확인되어 정확한 기종을 파악하기에 무리가 있다. 이러한 폐토기편을 가지고 당시의 기종 생산비율과 기종 우선순위를 파악하는 것에는 많은 문제점이 있을 것이지만, 전체적인 소성품에 대한 현황을 파악하고자 하였다. 분석결과 5세기 후반 백제 토기요에서 소성된 토기는 모두 16기종이며, 주로 호와 같은 생활ㆍ부장용기가 확인되는 반면 옹과 같은 저장용기는 소량 확인되는 점을 특징으로 들 수 있다.
이로써 5세기 후반 백제 토기요의 가장 큰 특징은 연소부 구조와 소성부의 요상형태이다. 연소부의 구조가 수직연소식에서 수평연소식으로 변화하고, 소성부 요상 전면에 홈이 새롭게 추가되어 웅진기 토기요로 이어진다는 점이매우 특이할만 하다. 이는 5세기 후반 백제 토기요가 원삼국∼한성백제기 토기요에서 웅진백제기 토기요로 바뀌어 가는 과도기적 단계에 해당되는 것으로 볼 수 있겠으며, 이 시기에 나타나는 특수한 현상로 설정할 수 있을 것이다. 더 나아가 백제 토기요의 구조변화는 시간적으로는 5세기 후반, 공간적으로 경기남부와 충청북부 지역에서 일어난 것으로 판단된다. 유물은 호, 개배, 고배 등과 같은 중ㆍ소형토기가 주로 확인되며, 대옹과 같은 대형토기의 비율이 현저히 적어지는 점이 특징적이다. 그리고 조업시기는 토기요의 군집수, 유물의 량과 기종을 고려하면 장기간에 걸쳐 대량생산을 한 것이 아니라, 단기간에 제한적인 기종을 소성하여 자급자족을 하였거나, 인근지역에 공급한 것으로 볼 수 있다.
이상으로 안성 양변리 백제 토기요를 분석한 후, 동시기의 자료들과 비교하여 5세기 후반 백제 토기요의 특징을 살펴보았다. 본고의 목적이 양변리 토기요를 중심으로 5세기 후반 백제 토기요의 특징을 파악하고자 한 것이지만, 이전시기(3~5세기)와 이후시기(6세기 이후)의 토기요들을 먼저 검토했어야 하는 아쉬움도 적지 않게 남는다. 또한 토기요의 특성상 기타 유구에 비해 자료의 부족함과 연소부와 소성부와 같은 일부 구조속성을 통해 특징을 파악한 점에서 한계를 가질 수 있다.
다만 필자의 생각은 백제 토기요의 전체적인 구조변화와 백제토기의 생산체제, 유통체계를 살펴보기에 앞서 각 시기별 혹은 유적별로 특징을 우선적으로 살펴보는 것 또한 매우 중요한 작업이라고 생각된다. 이러한 생각을 바탕으로 본 연구를 진행하였으며, 추후 본 연구에서 설정한 5세기 후반 백제 토기요의 특징을 중심으로 원삼국∼한성백제기 토기요와 웅진백제기 토기요에 대한 특징 또한 살펴볼 것이다. 그리고 더 나아가 백제 토기요의 전체적인 생산체제와 유통체계를 파악하기 위한 연구도 지속적으로 진행할 것이다.
다국어 초록 (Multilingual Abstract)
In this study, in the late the fifth century, there is a purpose of the mill to see the characteristics of the Baekje earthenware kiln based on Yangbyeonri Baekje earthenware kiln. Therefore, after analyzing the Yangbyeonri Baekje earthenware kiln I s...
In this study, in the late the fifth century, there is a purpose of the mill to see the characteristics of the Baekje earthenware kiln based on Yangbyeonri Baekje earthenware kiln. Therefore, after analyzing the Yangbyeonri Baekje earthenware kiln I studied, you are trying to extract the feature compared and analyzed with that of the same period. I described the current state of the earthenware kiln and Yangbyeonri ruins in chapter Ⅱ, Ⅲ in chapter analyzes Yangbyeonri earthenware kiln, meeting facilities, for such relics, and chronology in the late fifth century. And in chapter Ⅳ, after comparing and analyzing earthenware kiln of about the same time as the Yangbyeonri earthenware kiln was analyzed in chapter Ⅲ, late the fifth century, and understand the characteristics of Baekje earthenware kiln.
There is a slightly elevated hills of around 100~200m above sea level on the whole, location is located in the nearby rivers, large and small. In addition, it is determined that has a terrain very good condition between songs alluvium and alluvial earth which is formed in the river are distributed, earthenware kiln to location.
The construction method, both underground and semi-underground is confirmed, based oval has become mainstream planar. Scale is checked all large, medium, and small.
All detailed to analyze the Yojeonbu, Yeonsobu, Soseongbu, Yeondobu and were used to investigate the remains of ancillary facilities.
I found that the planar form of a rectangular system is confirmed mainly Yeonsobu, the scale was maintained generally about 200cm. Elliptical has become the Soseongbu, scale is different in each earthenware kiln. Form on the bottom of the kiln is confirmed groove of large and small especially, it is very characteristic. The slope of the kiln floor is well known lamp the most reliable 10~20 °, but late the fifth century, the slope of the kiln floor of Baekje earthenware kiln, been confirmed between 20~30 ° on the whole are. Yeondobu is classified slanted, steps+tilt type, the vertical type.
The relic, it is not reasonable to know the exact model very rare, only been observed on the side if it is excavated in bowl-shaped. That has a lung earthenware pieces thereof, to grasp the priority of the model and the production ratio of the model at the time, there are many problems, but trying to grasp the current state of the sintered product as a whole. As a result of the analysis, the earthenware in the late 5th century, was fired at Baekje earthenware kiln, it is 16 for all models, lifeㆍdirector courage, such as the lake is mainly been confirmed, storage containers, such as jars are, mentioned as characterized in that a small amount be confirmed.
The most important feature of Baekje earthenware kiln in the late the fifth century is a strange form of thermoplastic resin portion and Yeonsobu structure. It is the point structure of the combustion section is changed to horizontal in a vertical combustion combustion, groove is a new addition to the Soseongbu bottom part completely, leading to earthenware kiln of Woongjin period. I found in the late the fifth century, this is the one corresponding to the transition period Baekje earthenware kiln will change as a Woongjin earthenware kiln down in the Proto-Three and Hanseong Baekje Period earthenware kiln. In addition, I considered in the late fifth century, structural changes in the Baekje earthenware kiln, and occurred in the region of North Chungcheong and Gyeonggi southern spatially in time. Relic is a distinctive point that small-and medium-sized earthenware issue such as Jar, Flat cup with cover, Mounted cup the proportion of large earthenware like jars is reduced significantly. And it is possible to congestion that earthenware kiln operation time, considering the model and amount of artifacts, rather than having to do mass production in the long term, did you self-sufficiency by firing a model limited in the short term, it can be seen as having been supplied to the area.
목차 (Table of Contents)