http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
티타늄(Ti)을 기초로 한 촉매(TiCl₄/ or CpTiCl₃)의 종류가 스틸렌-에틸렌 공중합체(Copolymer)의 구조에 미치는 영향
하진욱 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
본 연구에서는 Ti를 기초로 한 두 가지 다른 촉매계(CpTiCl₃-MAO and TiCl₄-MAO)를 사용하여 제조하였다. 제조된 스틸렌-에틸렌 공중합체(copolymer)의 구조와 열적 특성은 C-NMR(Nuclear Magnetic Resonance)과 DSC(Differential Scanning Calorimetry)를 사용하여 고찰하였다. 두 촉매계 모두 메틸알루미녹센(MAO)을 조촉매로 사용하였다. C-NMR 결과 CpTiCl₃촉매계에서 제조된 공중합체는 신디오택틱 폴리스틸렌(snydiotatic polystyrene)의 주사슬(main chain)에 에틸렌 단위(unit)가 결함(defect)으로 무작위(randomly)로 분산 된 구조를 보인 반면, TiCl₄촉매계에서 제조된 공중합체는 폴리에틸렌(polyethylene)의 주사슬(main chain)에 스틸렌 단위가 결함(defect)으로 무작위(randomly)로 분산 된 구조를 가짐을 알 수 있었다.
한현각 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
An experimental investigation was performed to study the minimum transport velocity through horizontal pipe lines for bidispersed suspension. Experimentally determined settling velocity of uniform solid suspensions was used to develop a methods for the calculations of the minimum transport velocity in which fine particles and fluid media are assumed to be a hypothetical fluid phase. The result agreed with experiments within 10% of R.M.S. deviation for total solid concentration up to 15% and various ratios of fine coarse particles.
시간 종속 특징을 갖는 다층 셀 구조 이동 통신 시스템의 성능분석
김두용,김태훈 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
In order to meet the increasing demands of personal mobile communication with developed wireless mobile communication services and solve the burden on system traffic, mobile communication systems with multi-layer cell structure is proposed. Mobile communication systems with multi-layer cell structure not only have steady state characteristic but also have time-dependent and nonstationary conditions. Therefore, queueing network models is proposed for performance evaluation of time-dependent mobile communication systems with multi-layer cell structure. Using the queueing network models, the proposed performance evaluation methods provide the convenience for solving complex numerical methods.
김홍래 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
This paper addresses the issue of the branch topology error detection and identification in power systems. Topology errors may cause the state estimators to converge to a wrong solution or in some cases not to converge at all. In this paper, the branch topology error identification is carried out as part of the state estimation procedure. The standard formulation of the state estimation problem is modified to include the effects of the branch flow errors as well. The basic idea is that the estimates of these error variables will be insignificant if the branch is modeled correctly and they will be relatively large otherwise. A two step procedure for the detection and identification of faulted branches is proposed. Supporting examples are given for the case of single and multiple line outages using the 14 bus system.
유홍진 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
Adsorption rates for pure CO₂and N₂were studied at 313 and 343 K because these can play a key role in designing a PSA bed. TGA(thermogravimetric analysis) technique was used for the collection of adsorption rate data and domestic-and foreign-produced activated carbons were used as adsorbents. Adsorption rates of CO₂were much faster than those of N₂.
비선형 슬라이딩 관측기에 의한 견실한 출력궤환 가변 구조 제어
김동식 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
In the paper, robust output-feedback variable structure control algorithm is performed to cope with a serious limitation on the practical usefulness of variable structure control theory. The control system is designed so that a new type of state trajectories called sliding mode may exist on the switching surfaces by feedback of the system outputs. A necessary and sufficient condition for the existence of a sliding mode is derived by Lyapunov's second method. Also, nonlinear sliding observer is introduced to improve the robustness for the uncertain systems with linear output satisfying structure matching conditions. It will be shown that this asymptotic nonlinear sliding observer for these systems can be designed if the system outputs satisfy two additional assumptions. One of the advantages of this approach is that only the bounds need be incorporated into the observer-controller design.
천인국 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
본 연구에서는 거리 영상을 분할하기 위하여 Geman등이 주장한 파티션 모델을 적용하였다. 화소배열과 라벨 배열, 에너지 함수, 차이 측정 함수등을 정의하였으며 차이 측정 함수는 두 영역간의 평면 근사 오차를 이용한다. 거리 영상 분할 문제는 입력 영상이 주어졌을 때 가장 확률적으로 높은 라벨 상태를 찾는 것으로 정의된다. 특정한 라벨 상태의 확률은 깁스(Gibbs) 확률 분포로 정의되고 사후 최대 확률 상태는 전역 에너지 최소 상태에 해당한다. 에너지 상태는 차이 함수와 금지 패턴의 갯수로 이루어진다. 두 개의 라벨 사이의 낮은 차이값은 같은 라벨값이 되도록 유도되고 큰 차이값은 서로 다른 라벨을 장려한다. 매우 작은 영역은 반복적인 탐색 처리 과정에서 금지 상태로 정의된다. 라벨의 최종 상태는 제한 최적화의 일종으로 찾아진다. 실제 거리 영상에 대해서 실험한 결과가 제시된다.
효과적인 지역화 학습을 위한 CD Title의 설계 및 구현
공용해,오세두 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
Nowadays the importance of regional education is ever increasing. Regional education aims students to learn social concept through personally experiencing their society. But the high cost in personal experience and the lack of supplementary media for regional education make the education less effective. Moreover the education media needs to be developed appropriate to individual region to be considered. For this reasons, a CD-ROM title for regional education is designed in this research. Since the CD-ROM title can be designed appropriate to the specific region and provide various multimedia effect to students, the design of CD-ROM title is very effective in achieving regional education.
이수연,안종근 순천향대학교 부설 산업기술연구소 1998 순천향 산업기술연구소논문집 Vol.3 No.3
We introduced the methods of a DAVIC and IEEE 802.14 of the Medium Access Control Protocols in order to the two directions a CATV network based on HFC and proposed a new direction by the performance comparison about collision resolution algorithms that resolve an occurrent collision over an upstream channel in their protocols.