Metastasis associated genomic aberrations in stage II rectal cancer

Hong Zhao,Zhi-Zhou Shi,Rui Jiang,Dong-Bing Zhao,Hai-Tao Zhou,Jian-Wei Liang,Xin-Yu Bi,Jian-Jun Zhao,Zhi-Yu Li,Jian-Guo Zhou,Zhen Huang,Ye-Fan Zhang,Jian Wang,Xin Xu,Yan Cai,Ming-Rong Wang,Yu Zhang 한국유전학회 2016 Genes & Genomics Vol.38 No.11

Genomic aberrations of rectal carcinoma, especially DNA copy number changes associated with metastasis were largely unclear. We aim to identify the metastasis associated biomarkers in stage II rectal cancer. Formalin-fixed, paraffin-embedded primary tumor tissues of stage II rectal carcinoma were analyzed by array-based comparative genomic hybridization, and genomic aberrations were identified by Genomic Workbench and SAM software. Copy number changes and mRNA expressions were validated by Real-time PCR in an independent rectal cancer samples. The results showed that the most frequent gains in stage II rectal cancer were at 1q21.2-q23.1, 3p21.31, 11q12.2-q23.3, 12q24.11-q24.31, 12q13.11-q14.1 and losses in 18q11.2-q23, 17q21.33-q22, 13q31.1-q31.3, 21q21.1-q21.3, 8p23.3-p23.1 and 4q22.1-q23. Twenty-two amplifications and five homozygous deletions were also identified. We further found that S100A1 (1q21.3-q23.1), MCM7 (7q22.1) and JUND (19p13.11) were amplified and overexpressed in stage II rectal cancer. Interestingly, the genomic aberrations affected 14 signaling pathways including VEGF signaling pathway and fatty acid metabolism. Most importantly, loss of 13q31.1-q34 and gain of 1q44 were associated with distant metastasis. Our results indicated that these metastasis associated genomic changes may be useful to reveal the pathogenesis of rectal cancer metastasis and identify candidate biomarkers.

중국(中國)과 한국의 인사제도(人事制度)개혁에 대한 비교연구

( Zhao Zhi Lei ) 전남대학교 지역개발연구소 2014 지역개발연구 Vol.46 No.1

중국과 한국간의 교류와 영향이 점차 커지고 있음에도 불구하고 이 연구에서 양국 인사제도 간의 비교를 통해 시사점을 얻을 수 있도록 한다. 중국 인사행정 체제를 개선하기 위해 목표의 설정은 조직의 핵심기능과 일치해야 하며, 공무원제도의 입법과정을 가속해야 하며, 정책을 활용해야 한다. 한국 인사제도의 이론 및 실천에 대한 참고하고 중국 인사제도의 틀을 구축하는 데 도움이 될 것이다. 중국과 한국의 인사제도 개혁과정이 상호 비교해 보면서 그 특징을 발견하고, 그 인사행정개혁에 영향을 미치는 요인들은 어떠한 것이 있는가를 발견하는 것을 목적으로 한다. Research on reform of personnel system in China and South Korea During the administrative reform process in today`s world, China and South Korea absolutely have the most in common in historical and cultural background. What`s more, what makes the two countries much similar lies not merely in their basically-similar oriental cultural origins, but in their well-developed traditional administrative bureaucracy and the governments` consequent powerful control and dominance of national and social relation. Therefore, it is of particular significance to make a comparison on administrative reforms in the two countries.

MicroRNA-214-mediated UBC9 expression in glioma

( Zhi Qiang Zhao ),( Xiao Chao Tan ),( Ani Zhao ),( Li Yuan Zhu ),( Bin Yin ),( Jiang Ang Yuan ),( Bo Qin Qiang ),( Xiao Zhong Peng ) 생화학분자생물학회(구 한국생화학분자생물학회) 2012 BMB Reports Vol.45 No.11

It has been reported that ubiquitin-conjugating enzyme 9 (Ubc9), the unique enzyme2 in the sumoylation pathway, is up-regulated in many cancers. However, the expression and regulation of UBC9 in glioma remains unknown. In this study, we found that Ubc9 was up-regulated in glioma tissues and cell lines compared to a normal control. UBC9 knockdown by small interfering RNA (siRNA) affected cell proliferation and apoptosis in T98G cells. Further experiments revealed that microRNA (miR)-214 directly targeted the 3` untranslated region (UTR) of UBC9 and that there was an inverse relationship between the expression levels of miR-214 and UBC9 protein in glioma tissues and cells. MiR-214 overexpression suppressed the endogenous UBC9 protein and affected T98G cell proliferation. These findings suggest that miR-214 reduction facilitates UBC9 expression and is involved in the regulation of glioma cell proliferation.

A Multi-center Survey of HPV Knowledge and Attitudes Toward HPV Vaccination among Women, Government Officials, and Medical Personnel in China

Zhao, Fang-Hui,Tiggelaar, Sarah M.,Hu, Shang-Ying,Zhao, Na,Hong, Ying,Niyazi, Mayinuer,Gao, Xiao-Hong,Ju, Li-Rong,Zhang, Li-Qin,Feng, Xiang-Xian,Duan, Xian-Zhi,Song, Xiu-Ling,Wang, Jing,Yang, Yun,Li, Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.5

Objectives: To assess knowledge of HPV and attitudes towards HPV vaccination among the general female population, government officials, and healthcare providers in China to assist the development of an effective national HPV vaccination program. Methods: A cross-sectional epidemiologic survey was conducted across 21 urban and rural sites in China using a short questionnaire. 763 government officials, 760 healthcare providers, and 11,681 women aged 15-59 years were included in the final analysis. Data were analyzed using standard descriptive statistics and logistic regression. Results: Knowledge of HPV among the general female population was low; only 24% had heard of HPV. Less than 20% of healthcare providers recognized sexually na$\ddot{i}$ve women as the most appropriate population for HPV vaccination. There was high acceptance of the HPV vaccine for all categories of respondents. Only 6% of women were willing to pay more than US $300 for the vaccine. Conclusions: Aggressive education is necessary to increase knowledge of HPV and its vaccine. Further proof of vaccine safety and efficacy and government subsidies combined with increased awareness could facilitate development and implementation of HPV vaccination in China.

Effect of substrate reflecting conditions on the curing of UV curable resin layers on aluminum and the formation of surface wavy structures

Zhao, Zhi-Jun,Yang, Jeong-Ho,Li, Xin,Park, Sang-Hu Elsevier 2016 Materials letters Vol.164 No.-

<P><B>Abstract</B></P> <P>We have investigated the formation of surface wavy structures (wrinkles) depending on the diverse surface conditions of a substrate, and now report the effect of various levels of reflection of incident ultraviolet (UV)-light. UV-curable resin layers with a thickness of 0.15mm were coated on three different surface conditions; transparent glass, fine and rough surface aluminum plate, to compare the formation of wrinkles on each surface. Short irradiations of UV-light for 10, 15, 20, 25 and 30s were exposed, resulting in the weak to full polymerization of the skin of a resin layer, respectively. The wavy structures were formed during thermal curing under room temperature after the short exposure of UV-light. The difference in reflection conditions resulting from the various surface roughnesses of the substrates led to changes in the amounts of polymerization, and the distribution of polymerization intensity through the layer thickness. Due to these different mechanisms, wrinkling shapes were quite distinguished. Through this work, we observed that controllable producing an approximately 33% maximum difference in the line width of wrinkles by using different substrate surface conditions.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The effect of a substrate reflection condition was investigated for diverse generation of surface wrinkles. </LI> <LI> It was studied that the fundamental mechanism on formation of wrinkles by weak-polymerization and thermal curing process. </LI> <LI> Irregular line-shapes of wrinkles with a range of 62–92μm in line width were fabricated by using the effect of substrate reflection conditions. </LI> <LI> Contact angle was varied depending on wrinkle shapes from 63° to 76°. </LI> </UL> </P>

Adhesive-Layer-Free and Double-Faced Nanotransfer Lithography for a Flexible Large-Area MetaSurface Hologram

Zhao, Zhi-Jun,Hwang, Soon Hyoung,Kang, Hyeok-Joong,Jeon, Sohee,Bok, Moonjeong,Ahn, Sunggyun,Im, DaJeong,Hahn, Joonku,Kim, Hwi,Jeong, Jun-Ho American Chemical Society 2020 ACS APPLIED MATERIALS & INTERFACES Vol.12 No.1

<P>Herein, we develop an adhesive-free double-faced nanotransfer lithography (ADNT) technique based on the surface deformation of flexible substrates under the conditions of temperature and pressure control and thus address the challenge of realizing the mass production of large-area nanodevices in the fields of optics, metasurfaces, and holograms. During ADNT, which is conducted on a flexible polymer substrate above its glass transition temperature in the absence of adhesive materials and chemical bonding agents, nanostructures from the polymer stamp are attached to the deformed polymer substrate. Various silicon masters are employed to prove our method applicable to arbitrary nanopatterns, and diverse Ag and Au nanostructures are deposited on polymer molds to demonstrate the wide scope of useable metals. Finally, ADNT is used to (i) produce a flexible large-area hologram on the defect-free poly(methyl methacrylate) (PMMA) film and (ii) fabricate a metasurface hologram and a color filter on the front and back surfaces of the PMMA film, respectively, to realize dual functionality. Thus, it is concluded that the use of ADNT can decrease the fabrication time and cost of high-density nanodevices and facilitate their commercialization.</P> [FIG OMISSION]</BR>

Wolbachia infection in six species of gall wasps and their parasitoids

Zhao Gao-Zhi,Zhu Teng-Ran,Zeng Yang,Zhu Dao-Hong 한국응용곤충학회 2021 Journal of Asia-Pacific Entomology Vol.24 No.1

Wolbachia are endosymbiotic bacteria that are widely present in nematodes and arthropods and sometimes have a significant impact on the evolution, ecology, and biology of their hosts. The co-occurrence of Wolbachia within both Cynipid gall wasps and their parasitoids has rarely been studied. In this study, we report the occurrence of six species of gall wasps and 10 species of their parasitoids in central China. Wolbachia detection using the wsp gene showed that Wolbachia infected two species of gall wasps as well as their parasitoids, indicating that horizontal transmission of Wolbachia occurs between gall wasps and their parasitoids. Given that parasitoids will kill their hosts, Wolbachia may be horizontally transferred from gall wasps to their parasitoids. Using multilocus sequence typing (MLST) analysis, five new strains of Wolbachia were identified, all of which belonged to su pergroup A. The strains of Wolbachia that infected gall wasps were not the same as those that infected their parasitoids. This result indicated that Wolbachia may evolve independently in parasitoids after they have been transferred from the host gall wasps.

Random vibration analysis of train-slab track-bridge coupling system under earthquakes

Zhi-ping Zeng,Xian-feng He,Yan-gang Zhao,Zhi-wu Yu,Ling-kun Chen,Wen-tao Xu,Ping Lou 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.54 No.5

This study aimed to investigate the random vibration characteristic of train-slab track-bridge interaction system subjected to both track irregularities and earthquakes by use of pseudo-excitation method (PEM). Each vehicle subsystem was modeled by multibody dynamics. A three-dimensional rail-slabgirder-pier finite element model was created to simulate slab track and bridge subsystem. The equations of motion for the entire system were established based on the constraint condition of no jump between wheel and rail. The random load vectors of equations of motion were formulated by transforming track irregularities and seismic accelerations into a series of deterministic pseudo-excitations according to their respective power spectral density (PSD) functions by means of PEM. The time-dependent PSDs of random vibration responses of the system were obtained by step-by-step integration method, and the corresponding extreme values were estimated based on the first-passage failure criterion. As a case study, an ICE3 high-speed train passing a fifteen-span simply supported girder bridge simultaneously excited by track irregularities and earthquakes is presented. The evaluated extreme values and the PSD characteristic of the random vibration responses of bridge and train are analyzed, and the influences of train speed and track irregularities (without earthquakes) on the random vibration characteristic of bridge and train are discussed.

Eight Inch Wafer-Scale Flexible Polarization-Dependent Color Filters with Ag-TiO₂ Composite Nanowires

Zhao, Zhi-Jun,Lee, Minpyo,Kang, Hyeokjung,Hwang, SoonHyoung,Jeon, Sohee,Park, Namkyoo,Park, Sang-Hu,Jeong, Jun-Ho American Chemical Society 2018 ACS APPLIED MATERIALS & INTERFACES Vol.10 No.10

<P>In this study, 8 in. wafer-scale flexible polarization-dependent color filters with Ag-TiO<SUB>2</SUB> composite nanowires have been fabricated using nanoimprint and E-beam evaporation. The filters change their color via a simple rotation of the polarizer. In addition, the color of the filter can be controlled by altering the thickness of the Ag and TiO<SUB>2</SUB> nanowires deposited on the polymer patterns. Polarization-dependent color filters were realized by selective inhibition of transmission using the plasmonic resonance at the insulator/metal/insulator nanostructure interface, which occurs at particular wavelengths for the transverse magnetic polarizations. Special colors, including purple, blue, green, yellow, and pink, could be obtained with high transmission beyond 65% by varying the thickness of the deposited Ag and TiO<SUB>2</SUB> nanowires on the periodic polymer pattern under transverse magnetic polarization. In addition, a continuous color change was achieved by varying the polarization angle. Last, numerical simulations were implemented in comparison with the experimental results, and the mechanism was explained. We believe that this simple and cost-effective method can be applied to processes such as anticounterfeiting and holographic imaging as well as to color displays.</P> [FIG OMISSION]</BR>

Reliability-based assessment of American and European specifications for square CFT stub columns

Zhao-Hui Lu,Yan-gang Zhao,Zhi-wu Yu,Cheng Chen 국제구조공학회 2015 Steel and Composite Structures, An International J Vol.19 No.4

This paper presents a probabilistic investigation of American and European specifications (i.e., AISC and Eurocode 4) for square concrete-filled steel tubular (CFT) stub columns. The study is based on experimental results of 100 axially loaded square CFT stub columns from the literature. By comparing experimental results for ultimate loads with code-predicted column resistances, the uncertainty of resistance models is analyzed and it is found that the modeling uncertainty parameter can be described using random variables of lognormal distribution. Reliability analyses were then performed with/without considering the modeling uncertainty parameter and the safety level of the specifications is evaluated in terms of sufficient and uniform reliability criteria. Results show that: (1) The AISC design code provided slightly conservative results of square CFT stub columns with reliability indices larger than 3.25 and the uniformness of reliability indices is no better because of the quality of the resistance model; (2) The uniformness of reliability indices for the Eurocode 4 was better than that of AISC, but the reliability indices of columns designed following the Eurocode 4 were found to be quite below the target reliability level of Eurocode 4.