http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원형 열 파이프의 제작 및 열전달 성능에 대한 실험적 연구
임광빈,김철주 成均館大學校 科學技術硏究所 1989 論文集 Vol.40 No.2
In this study, boat pipe was manufactured using highly vacuum device and paying attention to manufacturing process-cleansing of parts, degassing in working fluid, soldering tinder condition of dry nitrogen gas. The objective of this study is to investigate fitness about manufacturing process through performance experiments which confirm a heat transfer characteristics of heat pipe. The results obtained from experiments were as follows. 1) Axial temperature distribution. 2) Highly thermal effective conductance. 3) Gravity force effect. This results showed that the manufacturing process used in this study was satisfied sufficiently general manufacturing of heat pipe.
국내 터널시공 중 막장지질조사의 문제점 및 개선방안에 관한 연구
김광염 ( Kwang Yeom Kim ),김창용 ( Chang Yong Kim ),임성빈 ( Sung Bin Yim ),윤현석 ( Hyun Seok Yun ),서용석 ( Yong Seok Seo ) 대한지질공학회 2006 지질공학 Vol.16 No.3
터널 시공 시에 관찰되는 막장의 상태는 굴착예정 막장의 지질상태를 가장 잘 표현하며, 지보패턴의 결정에 큰 영향을 미치므로 막장지질조사는 매우 중요하다. 따라서 막장지질조사를 통해서 단순히 암반평가만을 수행하는 것이 아니라 터널 시공 중에 영향을 미칠 수 있는 모든 지질요소 등을 관찰하여 다음 시공 막장의 지반상태를 예측하여야 한다. 그러나 현재 막장지질조사 시 기술 및 경험, 시간적인 제약 등으로 인한 한계로 조사결과를 시공에 충분히 반영하지 못하는 것이 현실이다. 본 연구에서는 기 시공된 국내 터널의 막장관찰기록지의 기록상황을 집계하여 막장지질조사의 문제점을 분석하고 그 개선 방안을 제시하였다. Face mapping during tunnel construction is useful and critical to predict the characteristics and stability condition of following tunneling sections and to select optimum support pattern. Therefore, a detailed geological survey of the tunnel faces, as important as a routine underground survey and a RMR evaluation, should provide critical information of the tunnel face condition in terms of the engineering geological condition and the safety of working environment for the following tunneling section. But the results of the face investigation have not been applied satisfactorily during tunneling due to limitation of technique, experience and time. This study analyze problems of face mapping in tunnel construction site by using statistical results of face mapping sheets obtained from completed tunnels, and suggest several opinions to improve face mapping during tunnel construction.
변위벡터방향성을 이용한 터널 전방 단층대 예측에 관한 연구
김광염 ( Kwang Yeom Kim ),임성빈 ( Sung Bin Yim ),김장겸 ( Jang Kyeom Kim ),서용석 ( Yong Seok Seo ),김진웅 ( Jin Woung Kim ) 대한지질공학회 2010 지질공학 Vol.20 No.4
본 연구에서는 3차원 유한요소해석을 통해 터널 굴착 전방에 위치한 단층대를 내공변위 계측결과를 이용하여 예측하기 위한 방안을 고찰하였다. 이를 위하여 터널과 단층대의 기하학적 위치변화에 따른 수치해석 모델을 구성하였다. 단층대의 경사는 각각 90°, 터널 진행 반대방향 45°, 터널 진행방향 45°의 3가지로 구분하였으며, 각 경사별로 주향을 15° 간격으로 변화시켜 총 15개의 해석 모델에 대하여 분석하였다. 각 모델별 내공변위의 변화양상은 천단부와 측벽부에서의 벡터 방향성을 이용하여 분석하였다. 최종적으로, 총 9가지 조건의 단층대 분포 특성에 해당하는 굴착면 전방 예측 경향선을 도시화 하였으며, 이를 기반으로 일상 계측 데이터 분석을 통한 전방 단층대 출현 및 배향의 예측 방안을 제시하였다. A three-dimensional finite element analysis was performed to predict the location of a fault zone ahead of a tunnel face based on convergence displacement. Geometrical models for the numerical analysis were developed based on the possible geometric intersection between the fault zone and the tunnel. Fifteen fault models were generated from combinations of faults with five different strikes (at 15° intervals) and three dips (vertical, 45° and -45°) relative to the tunnel route. The displacements on the crown and side walls were calculated and analyzed using a vector orientation approach. As a result, nine representative prediction charts were developed, showing location and orientation of the fault zone based on convergence displacement.
유압 천공데이터를 이용한 터널 굴진면 전방 지질상태 예측
김광염 ( Kwang Yeom Kim ),김창용 ( Chang Yong Kim ),김광식 ( Kwang Sik Kim ),임성빈 ( Sung Bin Yim ),서경원 ( Kyoung Won Seo ) 대한지질공학회 2009 지질공학 Vol.19 No.4
터널 및 지하구조물 시공 중 굴착 대상 지반에 대한 정확한 정보 획득은 작업의 효율성과 안전성을 위해 매우 중요하다. 본 연구에서는 굴착 중 굴진 대상 암반의 지질 구조를 신속하고 정확하게 감지하기 위하여 천공탐사 기법을 이용하였다. 유압 착암기 천공 시 발생하는 천공속도, 회전압, 피드압 등의 기계량을 측정하여 분석하였으며, 이를 통해 암석과 지질구조적 특성에 의해 변화되는 암반 특성을 평가 하였다. 터널 시공현장에서 굴착 중 획득된 천공데이터 분석에 의해 평가된 암반 정보는 굴착 전 수행된 선진수평시추 및 TSP 탐사 결과와 비교하여 신뢰성을 검토하였으며, 그 결과 천공 데이터의 변화가 암반 특성 및 불연속면 예측을 위해 효율적으로 활용될 수 있음을 확인하였다. During construction of a tunnel and underground structure, it is very important to acquire accurate information of the rock mass will be excavated. In this study, the drill monitoring method was applied for rapid prediction of geological condition ahead of the tunnel face. Mechanical data(speed, torque and feed pressure) from drilling process using a hydraulic drilling machine were analyzed to assess rock mass characteristics. Rock mass information acquired during excavation from drilling monitoring were compared with results from horizontal boring and tunnel seismic profiling(TSP). As the result, the drilling monitoring method is useful to assess rock mass condition such as geological structures and physical properties ahead of the tunnel face.
지질 조건을 고려한 RMR 인자값 추정을 위한 선형회귀식 제안
김광염 ( Kwang Yeom Kim ),임성빈 ( Sung Bin Yim ),김성권 ( Sung Kwon Kim ),김창용 ( Chang Yong Kim ),서용석 ( Yong Seok Seo ) 대한지질공학회 2007 지질공학 Vol.17 No.4
일반적으로 국내에서 터널의 지보 설계를 위한 암반분류법으로는 RMR 분류가 사용된다. 터널 시공 중 예비조사계획을 보완하고 노선을 따른 연속적인 지반 정보를 획득하기 위해 막장관찰과 동시에 RMR을 통한 암반분류가 시행된다. 하지만 국내 터널 시공 여건 상 조사를 위한 충분한 시간이 보장되지 않으며, 때로는 막장에서의 직접 관찰이 불가능 한 경우가 많다. 따라서 본 연구에서는 RMR 항목 중 상대적으로 조사 시간이 길며 세밀한 관찰이 요구되는 RQD와 불연속면 상태 항목의 배점을 추정하기 위한 선형회귀분석을 수행하였으며, 그 결과 최적 회귀식을 산정 하였다. 또한 기존연구에서 고려하지 않은 지질조건을 반영하기 위해, 퇴적암, 천매암, 화강암을 기반으로 하는 터널의 데이터를 각각 구분하여 분석하였다. 추정을 위한 변수로는 다른 RMR 항목을 대상으로 선정하였으며, 이들 간의 선형회귀분석을 통해 최종 회귀식을 산정하였다. In general, RMR classification system is used for the support design of a tunnel. Face mapping during excavation and RMR-based rock classifications are conducted in order to provide information for complementary changes to preliminary survey plans and for continuous geological estimations in direction of tunnel route. Although they are ever so important, there are not enough time for survey in general and sometimes even face mapping is not available. Linear regression analysis for the estimation of mediating RQD and condition of discontinuities, which require longer time and more detailed observation in RMR, was performed and optimum regression equations are suggested as the result. The geological data collected from tunnels were analyzed in accordance with three rock types as sedimentary rock, phyllite and granite to see geological effects, generally not been considered in previous researches. Parameters for the regression analysis were set another RMR factor.