A Case Study of Risk Assessment of Ozone Impact on Forest Tree Species in Japan

Watanabe, Makoto,Yamaguchi, Masahiro,Matsumura, Hideyuki,Kohno, Yoshihisa,Koike, Takayoshi,Izuta, Takeshi Korean Society for Atmospheric Environment 2011 Asian Journal of Atmospheric Environment (AJAE) Vol.5 No.4

Ozone ($O_3$) is a main component of photochemical oxidants and a phytotoxic air pollutant. Although the current levels of tropospheric $O_3$ in East Asia could adversely affect productivity of forest tree species, risk assessments of $O_3$ impact were limited. In this paper, we summarize the methodology of risk assessment of $O_3$ on forest tree species based on our two previous studies, risk assessments of $O_3$ impact on the growth of Fagus crenata by Watanabe et al. (2012) and on the annual carbon absorption of three representative conifers, Cryptomeria japonica, Pinus densiflora and Larix kaempferi by Watanabe et al. (2010). $O_3$ sensitivity of each tree species obtained from an experimental study, $O_3$ exposure and atmospheric N deposition based on field monitoring and vegetation survey were integrated by geographic information system method. Based on the results, we conclude that the area with high risk of $O_3$ impact does not necessarily correspond to the area with high $O_3$ exposure. The varieties of tree habitat, tree sensitivity to $O_3$ and annual carbon absorption among the tree species, and N deposition-induced change in the $O_3$ sensitivity of F. crenata are raised as the factors of discordance between areas with high risk and those with high $O_3$ exposure. In the last part of this paper, we discuss the present uncertainty and perspectives of risk assessment for the future studies on the impact of $O_3$ on forest tree species in East Asia.

A Case Study of Risk Assessment of Ozone Impact on Forest Tree Species in Japan

Makoto Watanabe,Masahiro Yamaguchi,Hideyuki Matsumura,Yoshihisa Kohno,Takayoshi Koike,Takeshi Izuta 한국대기환경학회 2011 Asian Journal of Atmospheric Environment (AJAE) Vol.5 No.4

Ozone (O_3) is a main component of photochemical oxidants and a phytotoxic air pollutant. Although the current levels of tropospheric O_3 in East Asia could adversely affect productivity of forest tree species,risk assessments of O_3 impact were limited. In this paper, we summarize the methodology of risk assessment of O_3 on forest tree species based on our two previous studies, risk assessments of O_3 impact on the growth of Fagus crenata by Watanabe et al. (2012) and on the annual carbon absorption of three representative conifers, Cryptomeria japonica, Pinus densiflora and Larix kaempferi by Watanabe et al. (2010). O_3 sensitivity of each tree species obtained from an experimental study, O_3 exposure and atmospheric N deposition based on field monitoring and vegetation survey were integrated by geographic information system method. Based on the results, we conclude that the area with high risk of O_3 impact does not necessarily correspond to the area with high O_3 exposure. The varieties of tree habitat, tree sensitivity to O_3 and annual carbon absorption among the tree species, and N deposition-induced change in the O_3 sensitivity of F. crenata are raised as the factors of discordance between areas with high risk and those with high O_3 exposure. In the last part of this paper, we discuss the present uncertainty and perspectives of risk assessment for the future studies on the impact of O_3 on forest tree species in East Asia.

Physical Science in Japan and Australia to 1914 : A Comparison

Watanabe, Masao,Home, R . W . 한국과학사학회 1986 한국과학사학회지 Vol.8 No.1

The review of international forum on magnetic force control IFMFC activity from 2010

Watanabe, Tsuneo The Korean Society of Superconductivity and Cryoge 2022 한국초전도저온공학회논문지 Vol.24 No.3

The Magnetic Force Control MFC technology is very useful because of its physical treatment process. Especially the Magnetic Separation MS technology is expected to contribute to SDGs 2030, Circular Economy and Carbon neutral 2050 realization. This paper describes the review of the IFMFC activity from 2010.The IFMFC is organized by three local committees of researchers in Japan, China and Korea. The IFMFC aims to exchange the information of the development results using the MFC technology and to educate the young researchers. The forum has been held in every year around three countries. In 2020 and 2021, the forum was organized by Zoom online due to the COVID-19. The 134 presentations were made up to 2020.The breakdown of these presentations are categorized to the environment remediation52%, material resource37% and fundamental research/technology11%. The Super Conducting Magnet SCM development promotes the MFC technologies. There are some impressive backgrounds as to the brilliant SM technology applications for many different magnetism ; SCM development, High Gradient Magnetic Separation HGMS, magnetic seeding method and magneto-Archimedes effect. This paper reviews the IFMFC activity according to those presented presentations.

Investigation of entanglement dynamics of flexible polymer chains via comparison of dielectric and viscoelastic properties: a review of recent findings

Watanabe, H. The Korean Society of Rheology 2001 Korea-Australia rheology journal Vol.13 No.4

This review article summarizes results of recent viscoelastic and dielectric studies for entangled cis-polyisoprene (PI) chains. The PI chains have the so-called type-A dipoles parallel along the chain backbone, and their slow viscoelastic and dielectric relaxation processes reflect the same global chain motion. However, this motion is differently averaged in the viscoelastic and dielectric properties, the former representing the isochronal orientational anisotropy of individual entanglement segments while the latter detecting the orientational correlation of the segments at two separate times (0 and t). On the basis of this difference, the viscoelastic and dielectric data of the entangled PI chains were compared to elucidate detailed features of the chain dynamics. Specifically, the molecular picture of dynamic tube dilation (DTD) incorporated in recent models was tested for linear and star PI chain. The comparison revealed that the DTD picture was valid for linear PI chains but failed for the star PI chains in the dominant part of the terminal relaxation. The failure for the star chains was related to the pre-requisite for the DTD process, rapid equilibration of successive entanglement segments through their constraint release (CR) motion: For the star chains, the dilated tube diameter expected in the terminal regime was considerably large because of a broad distribution of motional modes of the chains, so that the CR-equilibration required for DTD could not occur in time. The terminal relaxation of the star chain appeared to occur through the CR process before the expected DTD process was completed. The situation was different for the linear chain exhibiting narrowly distributed motional modes. The dilated tube expected for the linear chain was rather thin and the required CR-equilibration occurred in time, resulting in the success of the DTD picture. These detailed features of the chain dynamics was revealed only when the viscoelastic and dielectric properties were compared, demonstrating the importance of this comparison.

Conformational changes of short, discrete Rouse chain during creep and recovery processes

Watanabe, Hiroshi,Inoue, Tadashi The Korean Society of Rheology 2004 Korea-Australia rheology journal Vol.16 No.2

For the Rouse chain composed of infinite number of beads (continuous limit), conformational changes during the creep and creep recovery processes was recently analyzed to reveal the interplay among all Rouse eigenmodes under the constant stress condition (Watanabe and Inoue, Rheol. Acta, 2004). For completeness of the analysis of the Rouse model, this paper analyzes the conformational changes of the discrete Rouse chain having a finite number of beads (N = 3 and 4). The analysis demonstrates that the chain of finite N exhibits the affine deformation on imposition/removal of the stress and this deformation gives the instantaneous component of the recoverable compliance, $J_{R}$(0) = 1/(N-l)v $k_{B}$T with v and $k_{B}$ being the chain number density and Boltzmann constant, respectively. (This component vanishes for N\longrightarrow$\infty$.) For N = 2, it is known that the chain has only one internal eigenmode so that the affinely deformed conformation at the onset of the creep process does not change with time t and $J_{R}$(t) coincides with $J_{R}$(0) at any t (no transient increase of $J_{R}$(t)). However, for N$\geq$3, the chain has N-l eigenmodes (N-l$\geq$2), and this coincidence vanishes. For this case, the chain conformation changes with t to the non-affine conformation under steady flow, and this change is governed by the interplay of the Rouse eigenmodes (under the constant stress condition). This conformational change gives the non-instantaneous increase of $J_{R}$(t) with t, as also noted in the continuous limit (N\longrightarrow$\infty$).X>).).X>).

Degassing of Aluminum and Aluminum Alloy Powders as Studied by Gas Chromatography

Watanabe Ryuzo,Choi Duk-Sun,Kawasaki Akira 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1

Gas release behavior from aluminum and Al 7075 alloy powders during heating in argon was investigated by in-situ gas chromatography. Water vapor, hydrogen, carbon mono-oxide were detected as individual evolution spectra against heating temperature and time. The mechanisms of water and hydrogen evolutions were studied in detail for the determination of effective degassing condition. Magnesium in the alloy powder was found to lower the hydrogen evolution temperature to enhance overall hydrogen release.

The review of IFMFC (International Forum on Magnetic Force Control) -The accumulated knowledge and experience of the magnetic force control with IFMFC

Watanabe, Tsuneo The Korea Institute of Applied Superconductivity a 2018 한국초전도저온공학회논문지 Vol.20 No.2

The practical use of superconducting magnets is limited to medical equipment, energy equipment and the like. Therefore, it does not fully utilize the superior features of superconducting magnet or magnetic force. In order to overcome this blockage condition, The international Forum on Magnetic Force Control (IFMFC) was launched in Tokyo in 2010 by the magnetic separation researchers in Japan, Korea and China. The policy is to hold around the country every year, to apply the application to the engineering field of magnetic force utilization and information exchange about the development of applied science to mutual visit of researchers and to develop the application field of superconducting magnets in particular. The main object is to review the field of application of magnetic force with respect to published papers at 8 IFMFCs, and to introduce the trend of research forum utilizing strong magnetic force which is rare in the world. The United Nations is asking each country to achieve Corporate Social Responsibility (CSR) targets for 2030. This IFMFC review will be utilized in this field.

Long-lived K isomer and enhanced γ vibration in the neutron-rich nucleus ¹⁷²Dy: Collectivity beyond double midshell

Watanabe, H.,Zhang, G.X.,Yoshida, K.,Walker, P.M.,Liu, J.J.,Wu, J.,Regan, P.H.,Soderstrom, P.A.,Kanaoka, H.,Korkulu, Z.,Lee, P.S.,Nishimura, S.,Yagi, A.,Ahn, D.S.,Alharbi, T.,Baba, H.,Browne, F.,Bruce North-Holland Pub. Co 2016 Physics letters. Section B Vol.760 No.-

The level structure of <SUP>172</SUP>Dy has been investigated for the first time by means of decay spectroscopy following in-flight fission of a <SUP>238</SUP>U beam. A long-lived isomeric state with T<SUB>½</SUB>=0.71(5) s and K<SUP>π</SUP>=8<SUP>-</SUP> has been identified at 1278 keV, which decays to the ground-state and γ-vibrational bands through hindered electromagnetic transitions, as well as to the daughter nucleus <SUP>172</SUP>Ho via allowed β decays. The robust nature of the K<SUP>π</SUP>=8<SUP>-</SUP> isomer and the ground-state rotational band reveals an axially-symmetric structure for this nucleus. Meanwhile, the γ-vibrational levels have been identified at unusually low excitation energy compared to the neighboring well-deformed nuclei, indicating the significance of the microscopic effect on the non-axial collectivity in this doubly mid-shell region. The underlying mechanism of enhanced γ vibration is discussed in comparison with the deformed Quasiparticle Random-Phase Approximation based on a Skyrme energy-density functional.

Present Status of Research on Design and Processing of Functionally Graded Materials

Watanabe, Ryuzo,Nishida, Toshihiko,Hirai, Toshio 대한금속재료학회 2003 METALS AND MATERIALS International Vol.9 No.6

Recent activities in the research of functionally graded materials (FGMs) are reviewed with an emphasis on the fabrication techniques for graded microstructure and functions. The research activities have focused on the processing of graded structures that satisfy the designed functions. Several examples of practical applications of FGMs are described in the present paper to demonstrate the fabrication approaches typical to this kind of material. The remainder of the paper is devoted to summarizing a recently finished national project supported by the Ministry of Education of Japan. Research and developments with respect to FGMs in various fields including physics, chemistry, medical science, and biology are briefly reviewed.