http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Glass / p μc-Si:H 특성에 따른 i μc-Si:H 층 및 태양전지 특성변화 분석
장지훈(Jang, J.H.),이지은(Lee, J.E.),김영진(Kim, Y.J.),정진원(Jung, J.W.),박상현(Park, S.H,),조준식(Cho, J.S.),윤경훈(Yoon, K.H.),송진수(Song, J.),박해웅(Park, H.W.),이정철(Lee, J.C.) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
PECVD를 이용하여 제조된 미세결정질 p-i-n 실리콘 박막 태양전지에서, p 층은 태양전지의 윈도우 역할 및 그 위에 증착될 i {mu}c-Si:H 층의 'seed'층 역할을 수행하기 때문에, p층의 구조적 및 전기적, 광학적 특성은 태양전지의 전체 성능에 큰 영향을 미칠 수 있다. 본 연구에서는 SiH₄ 농도를 변화시켜 각기 다른 결정 특성을 갖는 p {mu}c-Si:H층을 제조하고 그 위에 i {mu}c-Si:H 층을 증착하여 p층의 결정 특성변화와 그에 따른 i {mu}c-Si:H 층 및 'superstrate' p-i-n 미세결정질 실리콘 박막 태양전지의 특성 변화를 조사하였다. P층의 경우, SiH₄ 농도가 증가함에 따라 결정분율 (Xc)이 감소하여 비정질화되었으며 그에 따라 dark conductivity가 감소하는 경향을 나타내었다. 각기 다른 결정분율을 가지는 p 'seed' 층 위에 증착된 태양전지는, p 'seed' 층의 결정분율이 증가함에 따라 개방전압, 곡선인자, 변환효율이 경향적으로 감소하였다. 이는 p 층 결정분율 변화에 따른 p/i 계면특성 저하 및 그 위에 증착되는 i {mu}c-Si:H 층의 결함밀도 증가 등에 따른 태양전지 특성 감소 때문인 것으로 판단되며, 이를 분석하기 위하여 i {mu}c-Si:H 층의 전기적, 구조적 특성 분석 및 태양전지의 dark I-V 특성 등을 분석하고자 한다.
Kim, Y.I.,Park, S.J.,Kwon, H.I.,Kim, E.H.,Si, Y.J.,Jeong, J.H.,Lee, I.W.,Nguyen, H.D.,Kwon, J.J.,Choi, W.S.,Song, M.S.,Kim, C.J.,Choi, Y.K. Elsevier Science 2017 INFECTION GENETICS AND EVOLUTION Vol.53 No.-
<P>During the outbreaks of highly pathogenic avian influenza (HPAI) H5N6 viruses in 2016 in South Korea, novel H5N8 viruses were also isolated from migratory birds. Phylogenetic analysis revealed that the HA gene of these H5N8 viruses belonged to clade 2.3.4.4, similarly to recent H5Nx viruses, and originated from A/Brk/Korea/Gochang1/14(H5N8), a minor lineage of H5N8 that appeared in 2014 and then disappeared. At least four reassortment events occurred with different subtypes (H5N8, H7N7, H3N8 and H10N7) and a chicken challenge study revealed that they were classified as HPAI viruses according to OIE criteria. (C) 2017 Elsevier B.V. All rights reserved.</P>
선택적 촉매 산화 반응에 의한 황화수소의 제거 1 . 촉매의 개발
천승우,박대원,우희철,홍성수,정종식 ( S . W . Chun,D . W . Park,H . C . Woo,S . S . Hong,J . S . Chung ) 한국공업화학회 1995 공업화학 Vol.6 No.5
본 연구는 H₂S를 산소와의 직접 산화 반응을 통해 원소 황의 형태로 제거하는 반응에서 고농도의 H₂S를 처리할 수 있는 촉매의 개발에 관한 것이다. 최적의 촉매를 개발하기 위해 각 담체와 금속 산화물에 대한 반응성 실험을 실시하였다. 실험 결과 담체로는 Al₂O₃, TiO₂, ZrO₂ 등이 금속 산화물로서는 Fe₂O₃, V₂O_5, SnO₂, Cr₂O₃ 등이 좋은 활성을 보였다. 반응물 중의 산소의 분압 영향과 반응물에 포함되어질 수 있는 물의 영향에 대해서 관찰한 결과 산소의 분압이 높을수록 전화율은 증가하나 황 선택도는 급격히 감소하는 경향을 보였고, 10vol.%의 물을 반응물에 첨가한 경우 전화율과 황 선택도가 동시에 감소하는 경향을 보였다. In this study, development of catalysts far the direct oxidation of hydrogen sulfide to elemental sulfur, specially for the treatment of high concentrantion of H₂S, was investigated. To find out optimum catalysts, a screenig test for various supports and metal oxides was carried out. Among the supports tested, Al₂O₃, TiO₂ and ZrO₂ showed good catalytic activity. Fe₂O₃, V₂O_5, SnO₂ and Cr₂O₃ have been considered to be active metal oxides. The study on the effects of oxygen partial pressure revealed that the conversion of H₂S increased with increasing the ratio of O₂/H₂S, but the selectivity to sulfur was drasctically decreased. Bath of the conversion of H₂S and the selectivity to sulfur were decreased when 10 vol.% of water was added to the mixture of H₂S and oxygen.
Park, E.W.,Moon, H.,Park, M.s.,Hyun, S.H. Pergamon Press ; Elsevier Science Ltd 2009 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY - Vol.34 No.13
The Cu-Ni-YSZ cermet anodes for direct use of methane in solid oxide fuel cells have been fabricated by electroplating Cu into a porous Ni-YSZ cermet anode. The uniform distribution of Cu in the Ni-YSZ anode was obtained by electroplating in an aqueous solution mixture of CuSO<SUB>4</SUB>.5H<SUB>2</SUB>O and H<SUB>2</SUB>SO<SUB>4</SUB> for 30min with 0.1A of applied current. When the Cu-Ni-YSZ anode was exposed to methane at 700<SUP>o</SUP>C, the amount of carbon deposited on the anode decreased as the amount of Cu in the Cu-Ni solid solution increased. The power density (0.24W/cm<SUP>2</SUP>) of a single cell with a Cu-Ni-YSZ anode was slightly lower in methane at 700<SUP>o</SUP>C than the power density (0.28W/cm<SUP>2</SUP>) of a single cell with a Ni-YSZ anode. However, the performance of the Ni-YSZ anode-supported single cell degraded steeply over 21h because of carbon deposition, whereas the Cu-Ni-YSZ anode-supported single cell showed enhanced durability up to 200h.
CAN통신을 이용한 H-브릿지 멀티레벨 인버터의 PWM 동기화 및 위상전이 방법
박영민(Y.M.Park),유한승(H.S.Yoo),장성영(S.Y.Jang),이현원(H.W.Lee),이세현(S.H.Lee),서광덕(K.D.Seo) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
H-브릿지 멀티레벨 인버터는 여러 개의 단상 Power Cell을 직렬로 연결함으로써 저전압 전력용 반도체를 사용하여 고전압을 얻을 수 있고, 정현파에 가까운 출력전압 파형을 얻을 수 있는 멀티레벨 인버터 토폴로지이다. 본 토폴로지는 출력전압 레벨에 비례하여 Power Cell의 수가 증가하므로, 주제어기의 연산능력에 대한 부담증가와 신호선의 많아지는 단점이 있다. 따라서 Power Cell제어를 직접적인 PWM 신호가 아닌 통신을 사용함으로써 이러한 단점을 극복할수 있으며, 신뢰성 측면이나 보수/유지 측면에서도 유리하다. 본 논문은 산업현장에서 신뢰성을 인정받아 많이 사용되고 있는 직렬통신 방식의 일종인 CAN통신 인터럽터를 이용한 H-브릿지 멀티레벨 인버터 Power Cell의 PWM 동기화 및 위상전이 방법에 관한 것이다. 제안된 방법의 주요 장점은 주제어기와 셀 제어기 사이에 직렬통신(CAN)을 사용함으로써 주제어기와 셀 제어기의 신호선의 단순화, 주제어기의 부담 감소, Power Cell의 모듈화, 셀 단위의 보호동작 용이, 확장성 향상 그리고 제어 신호 및 Power Cell의 신뢰성을 향상에 있다. 13레벨로 구성된 H-브릿지 멀티레벨 인버터 시험을 통해 제안된 방법의 타당성과 신뢰성을 입증하였다.