http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Residual analysis of veterinary drugs in bovine and equine muscle by targeted sampling plan in 2022
Sunjin Park(Sunjin Park),Chung-Oui Hong(Chung-Oui Hong),Se-Hyung Kim(Se-Hyung Kim),Jihye Kim(Jihye Kim),Inhae Jeon(Inhae Jeon),Seon-Young Lee(Seon-Young Lee),Moon Her(Moon Her),Sung-Won Park(Sung-Won 한국예방수의학회 2023 예방수의학회지 Vol.47 No.2
The Animal and Plant Quarantine Agency conducts a targeted sampling plan and analysis for veterinary drugs within the country every year. Target compounds included tetrachlorvinphos as an organophosphate, diminazene as an anti-infective medication, ketoprofen as a nonsteroidal anti-inflammatory drug, triclabendazole and clorsulon as flukicides in 2022. These compounds were not included in National Residues Program (NRP), despite their high sales ranking. A total of 94 bovine muscle samples and 20 equine muscle samples were collected from various locations across the country. The analysis of target compounds in muscle was performed using LC-MS/MS coupled with Food code 8.3.1 revised in 2022. A 2 g sample of muscle tissue was extracted using a water: acetonitrile (1:4, v/v) solution, then cleaned up with C18 and hexane saturated with acetonitrile. Compounds were separated with C18 column and mobile phases consisted of 0.1% formic acid in water (A) and 0.1% formic acid in acetonitrile (B). All analytes exhibited good linearity with correlation coefficients (R2) higher than 0.992. The limit of quantification (LOQ) of these compounds ranged from 0.21 to 2.79 μg/kg except for diminazene (3.85~6.86 μg/kg). The average recoveries of these analytes were 89.45~129.13% in muscle at spiked level of 10 or 20 μg/kg. Relative standard deviations (%) (intra-day and inter-day) were lower than 20% for all target compounds, except for diminazene and triclabendazole, whose intra-day RSD % was slightly higher than 20% in equine muscle. Testing confirmed that all 94 bovine and 20 equine muscle samples from 9 provinces were free from residues of veterinary drugs. Monitoring of compounds not included in the NRP should continue to ensure consumer health and food safety.
Sunjin Yim,Sungchul Kim,Inhwan Kim,Jae-Woo Park,Jin-Hyoung Cho,Mihee Hong,Kyung-Hwa Kang,Minji Kim,Su-Jung Kim,Yoon-Ji Kim,Young Ho Kim,Sung-Hoon Lim,Sang Jin Sung,Namkug Kim,Seung-Hak Baek 대한치과교정학회 2022 대한치과교정학회지 Vol.52 No.1
Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradientweighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.
Kim, Sunjin,Cho, Yeonjoo,Kim, Min Soo,Kim, Minsung Elsevier 2018 ENERGY Vol.147 No.-
<P><B>Abstract</B></P> <P>Supercritical carbon dioxide (S-CO<SUB>2</SUB>) power cycle has been under the spotlight for years as one of the promising solutions to resolve the energy and environmental problem. The most of previous studies focused on cycle performances and applicable configuration. In this study, detailed and extensive analysis on the recompression S-CO<SUB>2</SUB> power cycle was carried out to reflect more practical and desirable conditions. This study focused on the optimization of the S-CO<SUB>2</SUB> cycle by evaluation of the irreversibility of the recuperators using the effectiveness analysis and pinch point temperature difference (PPTD) analysis. Split ratio from the main stream to the recompressor and compression ratio were considered as independent parameters. From the simulation, the characteristics and performance of the recompression cycle were discussed. The optimum operating conditions were determined in combinations of PPTDs of the two recuperators. With the performance curves, control strategy of the two independent parameters is ranged for desirable operation of S-CO<SUB>2</SUB> power cycle.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Characteristics of the S-CO<SUB>2</SUB> recompression power cycle are analyzed. </LI> <LI> Effectiveness and pinch point temperature difference analyses for recuperators were applied. </LI> <LI> Cycle efficiency is maximized where entropy generation is minimized. </LI> <LI> Cycle efficiency is adjustable by controlling split ratio and pressure ratio. </LI> </UL> </P>
Highly Luminescent InP/GaP/ZnSNanocrystals and TheirApplication to White Light-Emitting Diodes
Kim, Sungwoo,Kim, Taehoon,Kang, Meejae,Kwak, SeongKwon,Yoo, Tae Wook,Park, Lee Soon,Yang, Ilseung,Hwang, Sunjin,Lee, Jung Eun,Kim, Seong Keun,Kim, Sang-Wook American Chemical Society 2012 JOURNAL OF THE AMERICAN CHEMICAL SOCIETY - Vol.134 No.8
<P>Highly stable and luminescent InP/GaP/ZnS QDs with a maximum quantum yield of 85% were synthesized by in situ method. The GaP shell rendered passivation of the surface and removed the traps. TCSPC data showed an evidence for the GaP shell. InP/GaP/ZnS QDs show better stability than InP/ZnS. We studied the optical properties of white QD-LEDs corresponding to various QD concentrations. Among various concentrations, the white QD-LEDs with 0.5 mL of QDs exhibited a luminous efficiency of 54.71 lm/W, Ra of 80.56, and CCT of 7864 K.</P>
하이브리드/전기자동차용 영구자석 모터의 열적 모델링과 냉각 시스템 최적 운전 제어에 대한 연구
김선진(Sunjin Kim),김귀택(Gwiteak Kim),정융(Yoong Jung),김민수(Min Soo Kim) 대한기계학회 2017 대한기계학회 춘추학술대회 Vol.2017 No.11
Because of the environmental issues, hybrid/electric vehicles are becoming the focus of the automotive industry and research field. From this trend, permanent magnet (PM) motors are receiving much attention because hybrid/electric vehicles can replace internal combustion engine as a PM motor to generate driving force. Like internal combustion engine, PM motor can produce power and also heat losses during the driving mode. So PM motor need cooling system to maintain the temperature lower than the temperature limit. So minimizing power consumption for the cooling system can directly affect the mileage extension of electric vehicle. So in this paper, optimal operation control of motor cooling system is studied based on the thermal characteristics of PM motor. For the optimizing PM motor cooling system, thermal modeling of PM motor is also conducted. If heat losses and heat transfer characteristics of PM motor are considered, cooling system control can be conducted efficiently. From the saving power of the cooling system, mileage extension of electric vehicle is calculated for the given driving mode. If the algorithm of the cooling system control is applied for another system of electric vehicle like battery or any other electrical component, electric vehicle driving range will be extended or battery size can be minimized.
과산화수소/케로신(촉매점화) 점화기의 점화특성에 관한 연구
김기우(Kiwoo Kim),김태완(Taewan Kim),이양석(Yangsuk Lee),김유(Yoo Kim),고영성(Youngsung Ko),김선진(Sunjin Kim) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
점화기의 발열온도와 점화특성은 엔진 성능에 있어 매우 중요한 요소이다. 과산화수소/케로신 점화기는 과산화수소 분해율에 따라 큰 성능차이가 발생하므로 점화기의 연구에 앞서 촉매 분해성능 연구를 선행할 필요가 있다. 본 논문에서는 과산화수소/케로신을 사용하는 점화기를 제작하여 과산화수소/촉매의 비율에 따른 발열온도 파악과 이때 얻어진 자료를 바탕으로 O/F ratio 별 점화특성의 확인하였다. Exothermic and ignition characteristic of igniter is very important factor in engine performance. Since the igniter performance is effected by Hydrogen Peroxide decomposition rate, we have to test the preliminary catalyst performance test. In this report, after making igniter using hydrogen peroxide/kerosene, a thermal characteristic were examined by comparing hydrogen peroxide mass and catalyst mass. And then we study ignition characteristic of the affects of O/F ratio using the previous data.