Effect of surface treatments on the bond strength of indirect resin composite to resin matrix ceramics

Ersan Celik,Sezgi Cinel Sahin,Dogu Omur Dede 대한치과보철학회 2019 The Journal of Advanced Prosthodontics Vol.11 No.4

PURPOSE. The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different surface treatments. MATERIALS AND METHODS. Ninety-nine cubic RMC specimens consisting of a resin nanoceramic (RNC), a polymer-infiltrated hybrid ceramic (PIHC), and a flexible hybrid ceramic (FHC) were divided randomly into three surface treatment subgroups (n = 11). In the experimental groups, untreated (Cnt), tribochemical silica coating (Tbc), and Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) laser irradiation (Lsr) with 3 W (150 mJ/pulse, 20 Hz for 20 sec.) were used as surface treatments. An indirect composite resin (IRC) was layered with a disc-shape mold (2 × 3 mm) onto the treated-ceramic surfaces and the specimens submitted to thermal cycling (6000 cycles, 5 -55°C). The SBS test of specimens was performed using a universal testing machine and the specimens were examined with a scanning electron microscope to determine the failure mode. Data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD test (α=.05). RESULTS. According to the two-way ANOVA, only the surface treatment parameter was statistically significant (P<.05) on the SBS of IRC to RMC. The SBS values of Lsr-applied RMC groups were significantly higher than Cnt groups for each RMC material, (P<.05). Significant differences were also determined between Tbc surface treatment applied and untreated (Cnt) PIHC materials (P=.039). CONCLUSION. For promoting a reliable bond strength during characterization of RMC with IRC, Nd:YAG laser or Tbc surface treatment technique should be used, putting in consideration the microstructure and composition of RMC materials and appropriate parameters for each material.

Evaluation of marginal adaptation in three-unit frameworks fabricated with conventional and powder-freedigital impression techniques

Hasan Kocaagaoglu,Haydar Albayrak,Sezgi Cinel Sahin,Aysegul Guleryuz Gurbulak 대한치과보철학회 2019 The Journal of Advanced Prosthodontics Vol.11 No.5

PURPOSE. The purpose of this in vitro study was to evaluate the marginal misfits of three-unit frameworks fabricated with conventional and digital impressions techniques. MATERIALS AND METHODS. Thirty brass canine and second premolar abutment preparations were fabricated by using a computer numerical control machine and were randomly divided into 3 groups (n=10) as follows: conventional impression group (Group Ci), Cerec Omnicam (Group Cdi), and 3shape TRIOS-3 (Group Tdi) digital impression groups. The laser-sintered metal frameworks were designed and fabricated with conventional and digital impressions. The marginal adaptation was assessed with a stereomicroscope at ×30 magnification. The data were analyzed with 1-way analysis of variances (ANOVAs) and the independent simple t tests. RESULTS. A statistically significant difference was found between the frameworks fabricated by conventional methods and those fabricated by digital impression methods. Multiple comparison results revealed that the frameworks in Group Ci (average, 98.8 ± 16.43 μm; canine, 93.59 ± 16.82 μm; premolar, 104.10 ± 15.02 μm) had larger marginal misfit values than those in Group Cdi (average, 63.78 ± 14.05 μm; canine, 62.73 ± 13.71 μm; premolar, 64.84 ± 15.06 μm) and Group Tdi (average, 65.14 ± 18.05 μm; canine, 70.64 ± 19.02 μm; premolar, 59.64 ± 16.10 μm) (P=.000 for average; P=.001 for canine; P<.001 for premolar). No statistical difference was found between the marginal misfits of canine and premolar abutment teeth within the same groups (P>.05). CONCLUSION. The three-unit frameworks fabricated with digital impression techniques showed better marginal fit compared to conventional impression techniques. All marginal misfit values were clinically acceptable.

Revisiting the Role of Esophageal Mucosal Dilated Intercellular Spaces in the Diagnosis and Pathophysiology of Heartburn

Volkan Gorgulu,Pelin Ergun,Sezgi Kipcak,Basak Doganavsargil,Daniel Sifrim,Serhat Bor 대한소화기 기능성질환∙운동학회 2023 Journal of Neurogastroenterology and Motility (JNM Vol.29 No.4

Background/AimsDilated intercellular spaces (DISs) facilitate the diffusion of noxious agents into the deep layers of the esophageal epithelium. The role of DIS in heartburn pathogenesis is still controversial. Therefore, we aim to reinvestigate DIS in an extensively evaluated group of patients and healthy controls (HCs). MethodsWe classified 149 subjects into the following groups: 15 HC, 58 mild erosive reflux disease (ERD), 17 severe ERD, 25 nonerosive reflux disease (NERD), 15 reflux hypersensitivity (RH), and 19 functional heartburn (FH). A total of 100 length measurements were performed for each patient’s biopsy. ResultsThe overall intercellular spaces (ISs) value of gastroesophageal reflux disease (GERD) patients was higher than that of HC (P = 0.020). In phenotypes, mild ERD (vs HC [P = 0.036], NERD [P = 0.004], RH [P = 0.014]) and severe ERD (vs HC [P = 0.002], NERD [P < 0.001], RH [P = 0.001], FH [P = 0.004]) showed significantly higher IS. There was no significant difference between the HC, NERD, RH, and FH groups. The 1.12 μm DIS cutoff value had 63.5% sensitivity and 66.7% specificity in the diagnosis of GERD. There was a weak correlation (r = 0.302) between the IS value and acid exposure time, and a weak correlation (r = −0.359) between the IS value and baseline impedance. A strong correlation was shown between acid exposure time and baseline impedance (r = −0.783). ConclusionsSince the IS length measurement had better discrimination power only in erosive groups, it is not feasible to use in daily routine to discriminate other nonerosive phenotypes and FH. The role of DIS in heartburn in nonerosive patients should be reconsidered.

A Case of Anomalous Origin and Course of Vertebral Artery in a Patient with Klippel Feil Syndrome

Onur Levent Ulusoy,Hadi Sasani,Sezgi Burçin Barlas,Ayhan Mutlu,Mehdi Sasani 대한영상의학회 2016 Korean Journal of Radiology Vol.17 No.4

Patients with Klippel-Feil syndrome (KFS) have an increased incidence of vascular anomalies as well as vertebral artery (VA) anomalies. In this article, we presented imaging findings of a 15-year-old female patient with KFS with a rare association of extraforaminal cranially ascending right VA that originated from the ipsilateral carotid bulb. Trifurcation of the carotid bulb with VA is a very unusual variation and to the best of our knowledge, right-sided one has not been reported in the literature.

Fibulin-3 as a Diagnostic Biomarker in Patients with Malignant Mesothelioma

Kaya, Halide,Demir, Melike,Taylan, Mahsuk,Sezgi, Cengizhan,Tanrikulu, Abdullah Cetin,Yilmaz, Sureyya,Bayram, Mehmet,Kaplan, Ibrahim,Senyigit, Abdurrahman Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.4

Background: New tumour biomarkers are being intensely investigated for malignant mesothelioma (MM). Fibulin-3 is produced in MM but its role remains uncertain. The aim of this study was to evaluate the validity of measuring serum fibulin-3 in the diagnosis and prognosis of MM. Materials and Methods: This prospective study was performed on 43 patients and 40 healthy controls who were admitted to our hospital between January 2012 and January 2014. Data from MM patients, including demographic and clinical features, routine laboratory data, levels of serum fibulin-3, and treatment outcomes were defined as potential prognostic factors. The receiver operating characteristic (ROC) curve for fibulin-3 was used to detect the cut-off value with highest sensitivity and specificity. Univariate survival analysis was performed using the Kaplan-Meier method in patients with MM. Afterwards, the possible factors identified with univariate analyses were entered into the cox regression analysis. Results: Our results revealed that patients with MM had significantly higher serum levels of fibulin-3 than controls. The results showed that the best cut-off point was 36.6 ng/ml with an AUC (area under the curve)=0.976, sensitivity=93.0% and specificity=90.0. In our study, the initial significant poor prognostic factors were advanced stage, high white blood cell count, high platelet count, high C-reactive protein (p<0.05 for each variable). Later, according to multivariate analysis the results showed only advanced stage as significant parameter (p=0.040). Conclusions: We determined that real use for serum fibulin-3 was not for prognosis but for diagnosis in MM. Also advanced stage was associated with poor MM prognosis.