http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Amir Mohammad Mansouri,Ali Akbar Zinatizadeh,Mohsen Irandoust,Aazam Akhbari 한국화학공학회 2014 Korean Journal of Chemical Engineering Vol.31 No.1
Simultaneous removal of carbon and nutrients from a synthetic wastewater in aerobic/anoxic sequence batch reactor (SBR) was investigated. The experiments were conducted based on a central composite design (CCD)and analyzed using response surface methodology (RSM). Two significant independent variables, cycle time and aeration time, were studied to analyze the process. Five dependent parameters--total COD (TCOD) removal, total nitrogen removal,total phosphorus removal, total Kjeldahl nitrogen removal and effluent nitrate concentration--were monitored as the process responses. The region of exploration for the process was taken as the area enclosed by cycle times (2,4.25 and 6.5 h) and aeration times (30, 40 and 50 min/h) boundaries. The maximum COD (87.18%) and TKN (78.94%)removal efficiencies were obtained at the cycle time and aeration time of 6.5 h and 50 min/h, respectively. While the maximum TN (71.15%) and phosphorus (68.91%) removal efficiencies were obtained at cycle time of 6.5 h and aeration time of 40min/h. As a result, high cycle time (6.5 h) and moderate aeration time (40min/h) were found to be the optimal region for maximum carbon and nitrogen removal efficiencies.
Yadollah Mansouri,Ali Akbar Zinatizadeh,Parviz Mohammadi,Mohsen Irandoust,Aazam Akhbari,Reza Davoodi 한국화학공학회 2012 Korean Journal of Chemical Engineering Vol.29 No.7
The hydraulic characteristic of an anaerobic rotating biological contactor (AnRBC) were studied by changing two important hydraulic factors effective in the treatment performance: the hydraulic retention time (τ) and rotational disk velocity (ω). The reactor hydraulic performance was analyzed by studying hydraulic residence time distributions (RTD) obtained from tracer (Rhodamine B) experiments. The experiments were conducted based on a central composite face-centered design (CCFD) and analyzed using response surface methodology (RSM). The region of exploration for the process was taken as the area enclosed by τ (60, 90 and 120 min) and ω (0.8 and 16 rpm) boundaries. Four dependent parameters, deviation from ideal retention time (Δτ), dead volume percentage and dispersion indexes (Morrill dispersion index (MDI) and dispersion number (d)), were computed as response. The maximum modeled Δτand dead volume percentage was 43.03 min and 37.51% at τ and ω 120 min and 0 rpm, respectively. While, the minimum predicted responses (2.57 min and 8.08%) were obtained at τ and ω 60min and 16 rpm, respectively. The interaction showed that disk rotational velocity and hydraulic retention time played an important role in MDI in the reactor. The AnRBC hydraulic regime was classified as moderate and high dispersion (d=0.09 to 0.253). As a result, in addition to the factors studied, the reactor geometry showed significant effect on the hydraulic regime.