http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Reinforced concrete wall as protection against accidental explosions in the petrochemical industry
Ambrosini, Daniel,Luccioni, Bibiana Maria Techno-Press 2009 Structural Engineering and Mechanics, An Int'l Jou Vol.32 No.2
In this paper the study of a reinforced concrete wall used as protection against accidental explosions in the petrochemical industry is presented. Many alternatives of accidental scenarios and sizes of the wall are analyzed and discussed. Two main types of events are considered, both related to vessel bursts: Pressure vessel bursts and BLEVE. The liberated energy from the explosion was calculated following procedures firmly established in the practice and the effects over the structures and the reinforced concrete wall were calculated by using a CFD tool. The results obtained show that the designed wall reduces the values of the peak overpressure and impulse and, as a result, the damage levels to be expected. It was also proved that a reinforced concrete wall can withstand the blast load for the considered events and levels of pressure and impulse, with minor damage and protect the buildings.
Reinforced concrete wall as protection against accidental explosions in the petrochemical industry
Daniel Ambrosini,Bibiana Maria Luccioni 국제구조공학회 2009 Structural Engineering and Mechanics, An Int'l Jou Vol.32 No.2
In this paper the study of a reinforced concrete wall used as protection against accidental explosions in the petrochemical industry is presented. Many alternatives of accidental scenarios and sizes of the wall are analyzed and discussed. Two main types of events are considered, both related to vessel bursts: Pressure vessel bursts and BLEVE. The liberated energy from the explosion was calculated following procedures firmly established in the practice and the effects over the structures and the reinforced concrete wall were calculated by using a CFD tool. The results obtained show that the designed wall reduces the values of the peak overpressure and impulse and, as a result, the damage levels to be expected. It was also proved that a reinforced concrete wall can withstand the blast load for the considered events and levels of pressure and impulse, with minor damage and protect the buildings.
Energy dissipation by friction for sliding blocks subjected to near-fault seismic base motion
Pablo M. Barlek Mendoza,Daniel Ambrosini,Bibiana M. Luccioni 국제구조공학회 2021 Smart Structures and Systems, An International Jou Vol.27 No.5
The objective of this study was to determine friction ratios that maximize energy dissipation on a seismic damper. The aforementioned friction damper basically consists of mass blocks that are able to slide on a flat surface. To carry out this analysis, a numerical-experimental approach was used. Firstly, the theoretical background and equations of motion for a SDOF system consisting of a mass supported on a flat surface with friction are introduced. Special emphasis is made on the fundamentals of stick-slip motion as well as energy considerations. Secondly, experimental studies carried out on a shaking table with harmonic and seismic records are described. These tests consisted of lead blocks contained on a U-shaped channel type aluminum section with its open end facing upwards. This configuration allowed blocks to slide solely in the direction of the base motion. Five different types of contact interfaces were considered to determine potential friction coefficients for the damper's design. Additionally, computational models based on rigid-body dynamics are presented. Numerical results were satisfactory particularly when comparing model's dissipated energy with empirical results. An analysis was carried out by calculating dissipated energy for the experimentally-calibrated models with varying friction ratios. For this purpose, eight near-fault seismic records were selected. Intervals with friction coefficients that maximize energy dissipation are proposed for each record. Finally, relationships between the computed friction ratios and register's peak ground acceleration (PGA) and root mean square acceleration (RMS) are discussed.