http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Vanlaere, Wesley,Impe, Rudy Van,Lagae, Guy,Maes, Thomas Techno-Press 2005 Structural Engineering and Mechanics, An Int'l Jou Vol.19 No.2
A steel silo traditionally consists of a cylindrical and a conical shell. In order to facilitate emptying operations, the cylinder is placed on local supports. This may lead to dangerous stress concentrations and eventually to local instability of the cylindrical wall. In this contribution, the locally supported cylinder is strengthened by means of ring stiffeners and longitudinal stiffeners and the effect of their dimensions on the buckling stress is investigated. This study leads to a number of diagrams, each of them representing the effect of one of the dimensions on the buckling stress. In each diagram, the failure pattern corresponding to the buckling stress is indicated.
Enhancement of the buckling strength of glass beams by means of lateral restraints
Belis, J.,Impe, R. Van,Lagae, G.,Vanlaere, W. Techno-Press 2003 Structural Engineering and Mechanics, An Int'l Jou Vol.15 No.5
New material applications and transparency are desired by contemporary architects. Its superb transparency and high strength make glass a very suitable building material -in spite of its brittleness- even for primary load bearing structures. Currently we will focus on load bearing glass beams, subjected to different loading types. Since glass beams have a very slender, rectangular cross section, they are sensitive to lateral torsional buckling. Glass beams fail under a critical buckling load at stresses that lie far below the theoretical simple bending strength, due to the complex combination of torsion and out-of-plane bending, which characterises the instability phenomenon. The critical load can be increased considerably by preventing the upper rim from moving out of the beam's plane. Different boundary conditions are examined for different loading types. The load carrying capacity of glass beams can be increased three times and more using relatively simple, cheap lateral restraints.
Behaviour of open beam-to-tubular column angle connections under combined loading conditions
Yanzhi Liu,Christian Málaga-Chuquitaype,Ahmed Y. Elghazouli 국제구조공학회 2014 Steel and Composite Structures, An International J Vol.16 No.2
This paper examines the behaviour of two types of practical open beam-to-tubular column connection details subjected to combined moment, axial and/or shear loads. Detailed continuum finite element models are developed and validated against available experimental results, and extended to deal with flexural, axial and shear load interactions. A numerical investigation is then carried out on the behaviour of selected connections with different stiffness and strength characteristics under various load combination scenarios. The influence of applied levels of axial tensile or compressive loads on the bending stiffness and capacity is examined and discussed. Additionally, the interaction effects between shear forces and co-existing bending and axial loads are examined and shown to be comparatively insignificant in terms of stiffness and capacity in most cases. It is also shown that the range of connections considered in this paper can provide rotational ductility levels in excess of those required under typical design scenarios. Based on these findings, a simplified component-based representation is proposed and described, and its ability to represent the connection response under combined loading is verified using results from detailed numerical simulations.