http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김지태(J. T. Kim),강충길(C. G. Kang) 한국소성가공학회 2011 한국소성가공학회 학술대회 논문집 Vol.2011 No.10
The HPF(Hot Press Forming) process is a forming method that offers various advantages such as superior mechanical properties, good formability, and very small spring back. However, relatively large-sized parts such as center pillars exhibit poor formability in the HPF process due to the limited material flow and thickness reduction in the process. Also, this reduction in thickness leads to cracks. In this study, in order to obtain the optimal conditions in the HPF processes for Front pillar, various process parameters were studied and analyzed by using the sheet forming software, J-STAMP. Then, comparison with two kinds of die was carried. Finally, the process parameters produce high equality products was determinde.
하프 브리지 LLC DC/DC 컨버터의 공진 전류 불균형 제어방법
김지태(J. T. Kim),현병철(B. C. Hyeon),조보형(B. H. Cho) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.1
본 논문에서는 LLC 공진형 컨버터 제작 시 널리 사용되는 병렬 권선을 이용한 방식 중 Center-tapped 구조의 정류단 설계에 있어서 각 권선 간의 비동일 특성에 기인한 권선 간의 전류불균형 현상에 대해 분석하고, 하프브리지 인버터단의 반도체스위치 시비율을 비대칭적으로 제어함으로써 이를 보상하는 방법을 제안한다. 자기변압기의 제작 특성상 각 권선이 동일한 특성을 가지는 것은 사실상 어려우며, 또한 컨버터의 제어 주파수가 증가할수록 이러한 전류불균형은 더욱 심화될 수 있다. 따라서 제안된 시비율 비대칭 제어를 통해 전류를 균형적으로 제어함으로 반도체 소자의 스트레스를 줄이고 균형적인 발열 및 효율 개선을 통한 성능 향상에 도움을 준다. 제안된 제어방법을 적용한 480W급 LLC 컨버터를 제작 구현함으로써 제안된 제어방법의 효용성을 검증한다.
혈액 투석시 충혈방법에 따른 인조혈관 내 유동 특성에 관한 수치해석 연구
김지태(J.T. Kim),성건혁(K.H. Sung),유홍선(H.S. Ryou) 한국전산유체공학회 2013 한국전산유체공학회지 Vol.18 No.3
Renal failure patients have to operate arteriovenous graft for hemodialysis. Blood flow characteristics influence the patency rate of arteriovenous graft. Numerical investigation is performed with the arteriovenous graft according to injection of blood. As a result, when the injection is not applied to venous graft, the low wall shear stress region appears at venous anastomosis. It may cause intimal hyperplasia at venous anastomosis.
디지털 제어를 이용한 Interleaving CRM 플라이백 타입 DC-AC 인버터의 구현
김지태(J. T. Kim),이규찬(K. C. Lee),서갑수(G. S. Seo),현병철(B. C. Hyeon),배현수(H. S. Bae),조보형(B. H. Cho) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.11
본 논문에서는 경계 모드(Critical Mode) 플라이백 타입의 DC-AC 인버터에 인터리빙을 적용한 디지털 제어를 제안한다. 연속모드(CCM)나 불연속모드(DCM)와 달리 경계 모드의 경우 주파수가 가변되기 때문에 인터리빙으로 구현하기는 상당히 까다로운 측면이 있다. 또한 아날로그 제어기로 구현에 한계를 지니기 때문에 보다 간편한 구현을 위해 디지털 제어IC을 이용하여 구현하는 방법에 대해 기술한다. 본문에서 200W급 플라이백 타입의 DC-AC 인버터에 경계모드 인터리빙을 방법을 적용한 후 실험으로 검증한다.
혈액 투석시 충혈방법에 따른 인조혈관 내 유동 특성에 관한 수치해석 연구
김지태(J.T. Kim),성건혁(G.H. Sung),유홍선(H.S. Ryou) 한국전산유체공학회 2013 한국전산유체공학회 학술대회논문집 Vol.2013 No.5
Renal failure patients have an arteriovenous graft surgery for hemodialysis access. Blood flow characteristic influence patency rate of arteriovenous graft. Numerical investigation is performed with the arteriovenous graft according to injection of blood. As a result, when the injection is not applied to venous graft, low wall shear stress region appears at venous anastomosis. It may cause intimal hyperplasia at venous anastomosis.