http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
21세기 벤처기업의 활성화 전략 : 벤처기업의 성과측정과 경쟁력 평가를 위한 모형 개발
고덕필,전현배,하대용,박찬정,곽세영,김락상 淸州大學校 産業經營硏究所 2000 産業經營硏究 Vol.23 No.1
정보화, 세계화, 고령화, 지방화로 특징짓는 21세기의 도래는 정치·경제·사회의 급격한 환경변화를 의미한다 수세기 전에는 한 나라의 GNP가 2배 증가하는 데 100년이 소요되었던 것이 현재는 불과 5년밖에 소요되지 않을 정도로 기업환경은 급속하게 변화하고 있다. 더욱이 최근 IMF체제하의 경제위기를 극복하고 한국경제가 도약의 전기를 만들기 위해서는 무엇보다도 경제구조의 개선이 요구되고 있다 이와 같은 경제적 환경변화에 효과적으로 적응하고, 현재의 경제위기를 극복할 수 있는 기업조직은 중소기업이 될 것이다 그러나 현재까지 물량 위주의 성장과정에서 우리 나라 중소기업은 소외되어 왔으며, 그 결과 우리 나라 중소기업의 국제경쟁력은 상대적으로 취약한 편이다 우리 나라가 21세기에 OECD회원국의 일원으로서 선진국 대열에 진입하기 위해서는 중소기업의 경쟁력 강화가 절실하게 요구되고 있다 그럼에도 불구하고 지금까지 정권이 바뀔 때마다 수없이 제시되어 온 수많은 중소기업 육성방안은 그 실효성을 거두지 못한 채 구호에 그친 실정이다. 그 주된 이유는 지금까지 제시된 중소기업의 경쟁력 강화방안 자체에 문제가 있었다고 하기보다는 정책대안을 수행하는 과정에 있어서 제도적으로 효율적인 운용이 이루어지지 않았기 때문이다 본 연구는 21세기에 중소기업의 생존 및 경쟁력 강화를 위한 3대 필요조건으로서 시장개척능력, 경영능력의 강화 및 정보화 촉진을 확인하고, 3대 필요조건과 관련하여 핵심적인 과제를 다루고자 한다. 따라서 본 연구과제는 21세기 정보화 사회를 맞이하여 우리 나라 중소기업 중에서도 특히 벤처기업의 경쟁력 향상을 위해 연구의 필요성이 절실한 네 가지 세부과제 1) 벤처기업의 성과측정과 경쟁력 평가를 위한 모형개발, 2) 경쟁력 강화를 위한 마케팅 전략, 3) 기업의 효율적인 의사결정을 위한 데이터 모델링 방법에 대한 연구, 그리고 4)벤처 캐피탈에 관한 연구를 통한 구체적인 정책대안을 제시하는 것을 목적으로 한다.
南文鉉,金正鉉,金洛敎 建國大學校 附設 産業技術硏究所 1992 논문집 Vol.17 No.-
본 연구에서는 AR 모델을 이용한 인간의 팔운동 근전신호의 기능분리에 관한 방법을 제시하였다. 4가지 기능의 팔운동 시에 근전신호의 특성을 잘 나타낼수 있는 매개변수를 공분산범과 연속적 최소제곱 알고리즘을 이용하여 각 기능에 대한 모델의 매개변수와 적정차수를 결정하였다. 또한 팔 기능을 분류하기 위한 신뢰구간은 총합제곱오차의 평균과 표준차로 결정하였다. AR 모델의 오차를 이용하여 각 운동에 대한 기능분리를 실행한 결과 차수가 4차일 때 가장 높은 인식률을 얻을 수 있었으며, 차수가 증가할수록 인식률은 감소하였다. 따라서 본 연구의 결과는 의용생체공학이나 재활공학에 응용할 수 있으리라 기대한다. In this thesis, general method using autoregressive model in the functional separation of the myoelectric signal of human arm movements are suggested. Covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe four arm movement patterns; the forearm flexion and extension, the wrist pronation and supination. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squares error. With the error signals of autoregressive(AR) model, the result showed that the highest success tate was obtained in the case of 4th order, and success rate was decreased with increase of order. This technique might be applied to biomedical-and rehabilitation-engineering.
남문현,김낙교,손재현 건국대학교 산업기술연구원 1995 건국기술연구논문지 Vol.20 No.-
In this paper, reference-model following fuzzy controller (RMFFC) was proposed in order to overcome the difficulty of extracting rules and defects of the adaptation performance in the FLC. RMFFC comprised inner feedback loop consisting of the FLC and plant, and outer loop consisting of adaptation mechanism which of the FLC. A Referenced-model was used for design criteria of a fuzzy controller which characterizes and quantizes the control performance required in the overall control system. Tuning control rules of FLC is performed by the adaptation mechanism. For this, the fuzzy model for tuning the control rules is designed in accordance with the feature of error information. Proposed algorithm was verified through simulation for various plant models which have different characteristics. And the results are obtained as follows. 1) Control performance required by a skilled operator was reflected to the control. 2) Unnecessary rule modification did not occur in steady-state, after completion of learning, by using the following error information 3) Performance of RMFFC was improved in various disturbances, comparing with conventional FLC and MRAC.
Single-Switch Buck Converter with a Ripple-Free Inductor Current
Hyun-Lark Do 전력전자학회 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.4
This paper presents a single-switch buck converter with a ripple-free inductor current. In the proposed converter, the filter inductor current ripple is completely removed by utilizing an auxiliary circuit consisting of an additional winding of the filter inductor, an auxiliary inductor, and an auxiliary capacitor. Moreover, the ripple-free current characteristic is maintained under both light load and full load conditions. The theoretical analysis and performance of the proposed converter were verified with a 110W experimental prototype operating at a 107 kHz switching frequency.
Zero-Voltage-Switching Boost Converter Using a Coupled Inductor
Hyun-Lark Do 전력전자학회 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.1
This paper presents a zero-voltage-switching (ZVS) boost converter using a coupled inductor. It utilizes an additional winding to the boost inductor and an auxiliary diode. The ZVS characteristic of the proposed converter reduces the switching losses of the active power switches and raises the power conversion efficiency. The principle of operation and a system analysis are presented. The theoretical analysis and performance of the proposed converter were verified with a 100W experimental prototype operating at a 107 ㎑ switching frequency.
Single-Switch Buck Converter with a Ripple-Free Inductor Current
Do, Hyun-Lark The Korean Institute of Power Electronics 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.4
This paper presents a single-switch buck converter with a ripple-free inductor current. In the proposed converter, the filter inductor current ripple is completely removed by utilizing an auxiliary circuit consisting of an additional winding of the filter inductor, an auxiliary inductor, and an auxiliary capacitor. Moreover, the ripple-free current characteristic is maintained under both light load and full load conditions. The theoretical analysis and performance of the proposed converter were verified with a 110W experimental prototype operating at a 107 kHz switching frequency.
Zero-Voltage-Switching Boost Converter Using a Coupled Inductor
Do, Hyun-Lark The Korean Institute of Power Electronics 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.1
This paper presents a zero-voltage-switching (ZVS) boost converter using a coupled inductor. It utilizes an additional winding to the boost inductor and an auxiliary diode. The ZVS characteristic of the proposed converter reduces the switching losses of the active power switches and raises the power conversion efficiency. The principle of operation and a system analysis are presented. The theoretical analysis and performance of the proposed converter were verified with a 100W experimental prototype operating at a 107 kHz switching frequency.