http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Heesuk Ku (검색결과 4 건)
- 무료
- 기관 내 무료
- 유료
-
Jo, Minsang,Ku, Heesuk,Park, Sanghyuk,Song, Junho,Kwon, Kyungjung Elsevier 2018 The Journal of physics and chemistry of solids Vol.118 No.-
<P><B>Abstract</B></P> <P>Li[Ni<SUB>1/3</SUB>Co<SUB>1/3</SUB>Mn<SUB>1/3</SUB>]O<SUB>2</SUB> cathode active materials are synthesized from co-precipitated hydroxide precursors Li<SUB>x</SUB>[Ni<SUB>1/3</SUB>Co<SUB>1/3</SUB>Mn<SUB>1/3</SUB>]<SUB>1-x</SUB>(OH)<SUB>2</SUB>, and the effect of residual Li in the precursors on the lithium-ion battery (LIB) performance of their corresponding cathode active materials is investigated. Three kinds of precursors that contain different amounts of Li are selected depending on different conditions of the solution composition for the co-precipitation and washing process. It is confirmed that the introduction of Li to the precursors reduces the degree of structural perfection by X-ray diffraction analysis. Undesirable cation mixing occurs with the increasing Li content of the precursors, which is inferred from a decline in lattice parameters and the calculated intensity ratio of (003) and (104) peaks. In the voltage range of 3.0–4.3 V, the initial charge/discharge capacities and the rate capability of the cathode active materials are aggravated when Li exists in the precursors. Therefore, it could be concluded that the strict control of Li in a solution for co-precipitation of precursors is necessary in the resynthesis of cathode active materials from spent LIBs.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The effect of residual Li in precursors on their LIB performance is investigated. </LI> <LI> Li content in the precursors is controlled by both co-precipitation and washing. </LI> <LI> The introduction of Li to the precursors induces undesirable cation mixing. </LI> <LI> Residual Li in precursors deteriorates their capacity and rate capability. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>
-
Room Temperature Magnesium Electrorefining by Using Non-Aqueous Electrolyte
Jesik Park,Yeojin Jung,Priyandi Kusumah,Bonita Dilasari,Heesuk Ku,Hansu Kim,Kyungjung Kwon,Churl Kyoung Lee 대한금속·재료학회 2016 METALS AND MATERIALS International Vol.22 No.5
The increasing usage of magnesium inevitably leads to a fast increase in magnesium scrap, and magnesium recycling appears extremely beneficial for cost reduction, preservation of natural resources and protection of the environment. Magnesium refining for the recovery of high purity magnesium from metal scrap alloy (AZ31B composed of magnesium, aluminum, zinc, manganese and copper) at room temperature is investigated with a non-aqueous electrolyte (tetrahydrofuran with ethyl magnesium bromide). A high purity (99.999%) of electrorefined magneisum with a smooth and dense surface is obtained after potentiostatic electrolysis with an applied voltage of 2 V. The selective dissolution of magnesium from magnesium alloy is possible by applying an adequate potential considering the tolerable impurity level in electrorefined magnesium and processing time. The purity estimation method suggested in this study can be useful in evaluating the maximum content of impurity elements.
-
리튬이차전지 양극활물질의 암모니아 침출액에서 공침법에 의한 활물질 전구체의 합성에 대한 암모니아 농도의 영향
박상혁,구희숙,이경준,송준호,김수경,손정수,권경중,Park, Sanghyuk,Ku, Heesuk,Lee, Kyoung-Joon,Song, Jun Ho,Kim, Sookyung,Sohn, Jeongsoo,Kwon, Kyungjung 한국자원리싸이클링학회 2015 資源 리싸이클링 Vol.24 No.6
In a recycling scheme of spent lithium ion batteries, a co-precipitation process for the re-synthesis of precursor is essential after the leaching of lithium ion battery scraps. In this study, the effect of ammonia as impurity during the co-precipitation process was investigated in order to re-synthesize a precursor of Ni-rich cathode active material $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622). As ammonia concentration increases from 1 M (the optimum condition for synthesis of the precursors based on 2 M of metal salt solution) to 4 M, the composition of obtained precursors deviates from the designed composition, most notably for Ni. The Ni co-precipitation efficiency gradually decreases from 100% to 87% when the concentration of ammonia solution increases from 1 M to 4 M. Meanwhile, the morphological properties of the obtained precursors such as sphericity, homogeneity and size distribution of particles were also investigated. 폐리튬이차전지 양극재 재활용기술에 있어 침출과정을 통해 회수된 유가금속을 다시 원하는 조성의 전구체로 재합성하는 공침공정은 필수적이다. 본 연구에서는 고용량 특성의 Ni-rich 조성인 $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ (NCM 622) 양극재의 전구체 재합성 시 암모니아가 불순물로서 미치는 영향을 확인하는 공침실험을 수행하였다. SEM 및 EDS 분석결과 양극재 전구체 최적 합성조건(금속염 용액 농도 2 M 기준 암모니아수 농도 1 M)에서 암모니아 농도가 증가할수록 원하는 조성의 전구체가 제조되지 않음을 확인하였다. Ni의 설계함량인 60 mol%를 기준하여 암모니아수 농도 1 M ~ 4 M 조건에서 각각 100%, 98%, 95%, 87%에 해당하는 공침효율을 보여주었다. 또한 제조된 전구체 입자들의 구형화도, 균일도 및 크기분포특성 등의 형상학적 특징을 확인하였다.
-
폐리튬이온전지로부터 유가금속을 회수하기 위한 암모니아 침출법
구희숙,정여진,강가희,김송이,김수경,양동효,이강인,손정수,권경중,Ku, Heesuk,Jung, Yeojin,Kang, Ga-hee,Kim, Songlee,Kim, Sookyung,Yang, Donghyo,Rhee, Kangin,Sohn, Jeongsoo,Kwon, Kyungjung 한국자원리싸이클링학회 2015 資源 리싸이클링 Vol.24 No.3
전기자동차의 수요가 증가함에 따라 리튬이온전지의 생산량도 증가하여 효율적인 전지 재활용 기술이 요구된다. 폐리튬이온전지를 재활용하는 방법에는 크게 건식제련과 습식제련에 기반한 방법으로 나눌 수 있다. 본 연구에서는 하이브리드 자동차에 사용된 폐리튬이온전지의 양극활물질을 습식제련에 기반한 암모니아침출법을 이용하여 활물질 내의 유용금속인 Ni, Mn, Co의 침출거동을 조사하였다. 물리적으로 처리된 활물질의 입자크기는 -65 mesh이며, 주된 원소는 14.0 wt% Ni, 13.0 wt% Mn, 5.7 wt% Co이다. 암모니아, 환원제 (아황산암모늄), pH 완충제 (탄산암모늄 혹은 황산암모늄)의 존재하에 각 금속의 침출거동을 확인하고, 또한 침출시간과 온도에 따른 침출률의 영향도 조사하였다. 환원제의 존재는 Ni과 Co의 침출률 향상을 위해 필수적이다. 암모니아침출법은 산침출법과 달리 Ni/Co와 Mn의 선택적인 침출이 가능하여 침출된 유용금속을 분리하는 단계를 줄일 수 있고, 산침출 후 수반되는 침전과정 시 필요로 하는 추가 염기성 시약의 사용을 줄일 수 있다. Recycling technologies would be required in consideration of increasing demand in lithium ion batteries (LIBs). In this study, the leaching behavior of Ni, Co and Mn is investigated with ammoniacal medium for spent cathode active materials, which are separated from a commercial LIB pack in hybrid electric vehicles. The leaching behavior of each metal is analyzed in the presence of reducing agent and pH buffering agent. The existence of reducing agent is necessary to increase the leaching efficiency of Ni and Co. The leaching of Mn is insignificant even with the existence of reducing agent in contrast to Ni and Co. The most conspicuous difference between acid and ammoniacal leaching would be the selective leaching behavior between Ni/Co and Mn. The ammoniacal leaching can reduce the cost of basic reagent that makes the pH of leachate higher for the precipitation of leached metals in the acid leaching.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
