http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Park, Seunghee,Park, Gyuhae,Yun, Chung-Bang,Farrar, Charles R. SAGE Publications 2009 Structural health monitoring Vol.8 No.1
<P>The active sensing methods using piezoelectric materials have been extensively investigated for the efficient use in structural health monitoring (SHM) applications. Relying on high frequency structural excitations, the methods showed the extreme sensitivity to minor defects in a structure. Recently, a sensor self-diagnostic procedure that performs in situ monitoring of the operational status of piezoelectric (PZT) active sensors and actuators in SHM applications has been proposed. In this investigation, previously developed impedance models were revisited in order to investigate the effects of sensor and/or bonding defects on the admittance measurement. New parameters for sensor quality assessment of a PZT and coupling degradation effects between a PZT and bonding layer were incorporated into the traditional electromechanical impedance model for better estimation of the electromechanical impedance signatures and sensor diagnostics. The feasibility of the modified impedance model for sensor self-diagnosis using the admittance measurements was demonstrated by a series of parametric studies using a simple example of PZT-driven single degree of freedom spring-mass-damper system. This paper summarizes the description of the proposed modified electromechanical impedance model, parametric studies for impedance-based sensor diagnostics, and several issues that can be used as a guideline for future investigation.</P>
Jo, Gyuha,Choi, Ilyoung,Ahn, Hyungmin,Park, Moon Jeong The Royal Society of Chemistry 2012 Chemical communications Vol.48 No.33
<P>We present a facile synthetic route toward binder-free, highly-dispersed Ge nanoparticles in carbon matrices using one-step pyrolysis of self-assembled Ge–polymer hybrids. 3-Dimensionally arranged Ge–carbon exhibits remarkably enhanced cycling properties and rate capability compared with carbon sheathed Ge lacking organization.</P> <P>Graphic Abstract</P><P>Binder-free GeNPs–carbon hybrid anodes with highly reversible capacities and rate capability were achieved by one-step pyrolysis of self-assembled GeNPs–polymer hybrids. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c2cc30294b'> </P>
Hardware-in-the-loop 시뮬레이션 기반 제어기 검증을 위한 트랙터 plant 모델 개발
한규하 ( Gyuha Han ),안다빈 ( Da-vin Ahn ),이진웅 ( Jinwoong Lee ),박진감 ( Jinkam Park ),신옥식 ( Okshik Shin ),박영준 ( Young-jun Park ) 한국농업기계학회 2023 한국농업기계학회 학술발표논문집 Vol.28 No.1
제어기 알고리즘을 실제 트랙터에서 검증을 진행할 경우, 기능 안전 로직의 신뢰성에 따라 비용이 커지는 제한점이 있다. 그러므로 이번 연구에서는 hardware-in-the-loop 시뮬레이션(HILS) 기반 제어기 검증을 위하여 트랙터를 구성하는 전체 요소 중 제어기 외의 부분을 MATLAB/Simulink를 기반해 트랙터 plant 모델을 개발하였다. 개발된 트랙터 plant 모델은 입출력 프로세싱, HCU, 엔진, 변속기, 차량 모델의 크게 5가지 부분으로 이루어져 있다. 입출력 프로세싱은 제어기와 plant 모델이 주고받는 데이터의 종류에 따라 dSPACE 사의 ConfigurationDesk 6.7 프로그램을 통해 HILS의 realtime 구동이 가능하게끔 개발되었다. HCU는 모델링에 사용한 트랙터 비례제어밸브의 전류-압력 특성과 싱크로나이저의 전류 신호별 액추에이터의 거동을 반영하도록 개발되었다. 엔진은 토크맵에 따라 속도제어와 거버너를 통한 idle 제어가 가능하도록 개발되었다. 변속기는 전후진 클러치, 주변속 8단으로 구성된 듀얼 클러치 변속(DCT) 시스템과 함께 부변속 4단, PTO 3단으로 구성하였다. 차량 모델은 차량 무게, 타이어 제원 등의 실차 데이터를 사용하여 동역학 모델로 구성하였다. 개발된 트랙터 plant 모델은 test harness 기반 검증을 수행하였으며, 요구된 모델 성능을 만족함을 확인하였다.