Effects of clopidogrel and clarithromycin on the disposition of sibutramine and its active metabolites M1 and M2 in relation to CYP2B6*6 polymorphism

Pan, Wei,Bae, Soo-Kyung,Shim, Eon-Jeong,Park, Sung-Eun,Lee, Sang-Seop,Park, Soo-Jin,Yeo, Chang-Woo,Zhou, Hong-Hao,Shon, Ji-Hong,Shin, Jae-Gook Informa Healthcare 2013 Xenobiotica Vol.43 No.2

<OL><LI><P>Plasma concentrations of sibutramine and its two active metabolites after single oral dose of sibutramine were determined in Korean healthy male subjects with different CYP2B6 genotypes (CYP2B6*1/*1, *1/*6 and *6/*6), either alone or after four-day pretreatment with clopidogrel or clarithromycin.</P></LI><LI><P>The pretreatment with clopidogrel and clarithromycin raised the mean area under the concentration-time curve (AUC) of sibutramine by 163% and 255%, respectively.</P></LI><LI><P>Co-administration of clarithromycin, combined with <I>CYP2B6*6/*6</I> genotype, led to highest concentration of sibutramine.</P></LI><LI><P>The molar sum AUC (M1 + M2) was raised by 35% in the clopidogrel phase but not significantly affected by clarithromycin or CYP2B6 genotype.</P></LI><LI><P>The <I>CYP2B6*6/*6</I> subjects in the clopidogrel phase showed the highest molar AUC (M1 + M2) among three genotype groups throughout the three phases.</P></LI><LI><P>The exposure of sibutramine and its metabolites seemed to be associated with the CYP2B6 genotype.</P></LI><LI><P>The treatment of clopidogrel significantly altered the disposition of active metabolites as well as sibutramine, but clarithromycin only affects the disposition of sibutramine.</P></LI><LI><P>These results suggest that the perturbation of CYP2B6 activity may contribute to the inter-individual variation of sibutramine drug responses although the clinical relevance is remained to be established.</P></LI></OL>

Chest Film Demonstrating Reverse Batwing Pulmonary Opacities in a Patient with COVID-19 Pneumonia

Sheng-Wei Pan,Chih-Jung Chang,Yuh-Min Chen 대한결핵및호흡기학회 2022 Tuberculosis and Respiratory Diseases Vol.85 No.1

.

Reformability evaluation of blasting-enhanced permeability in in situ leaching mining of low-permeability sandstone-type uranium deposits

Wang Wei,Liang Xuanyu,Niu Qinghe,Wang Qizhi,Zhuo Jinyi,Su Xuebin,Zhou Genmao,Zhao Lixin,Yuan Wei,Chang Jiangfang,Zheng Yongxiang,Pan Jienan,Wang Zhenzhi,Ji Zhongmin 한국원자력학회 2023 Nuclear Engineering and Technology Vol.55 No.8

It is essential to evaluate the blasting-enhanced permeability (BEP) feasibility of a low-permeability sandstone-type uranium deposit. In this work, the mineral composition, reservoir physical properties and rock mechanical properties of samples from sandstone-type uranium deposits were first measured. Then, the reformability evaluation method was established by the analytic hierarchy process-entropy weight method (AHP-EWM) and the fuzzy mathematics method. Finally, evaluation results were verified by the split Hopkinson Pressure Bar (SHPB) experiment and permeability test. Results show that medium sandstone, argillaceous sandstone and siltstone exhibit excellent reformability, followed by coarse sandstone and fine sandstone, while the reformability of sandy mudstone is poor and is not able to accept BEP reservoir stimulation. The permeability improvement and the distribution of damage fractures before and after the SHPB experiment confirm the correctness of evaluation results. This research provides a reformability evaluation method for the BEP of the low-permeability sandstone-type uranium deposit, which contributes to the selection of the appropriate regional and stratigraphic horizon of the BEP and the enhanced ISL of the low-permeability sandstone-type uranium deposit.

Quality of root canal fillings using three gutta-percha obturation techniques

Ho, Edith Siu Shan,Chang, Jeffrey Wen Wei,Cheung, Gary Shun Pan The Korean Academy of Conservative Dentistry 2016 Restorative Dentistry & Endodontics Vol.41 No.1

Objectives: The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction. Materials and Methods: Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance. Results: The overall mean volume fraction of gutta-percha was $68.51{\pm}6.75%$ for CL, $86.56{\pm}5.00%$ for UL, and $88.91{\pm}5.16%$ for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group. Conclusions: WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.

Optimization of Micromilling Microchannels on a Polycarbonate Substrate

Pin-Chuan Chen,Chang-Wei Pan,Wei-Chen Lee,Kuan-Ming Li 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.

Rapidly prototyping a polymer microfluidic device is a growing interest for various applications and micromilling is one of the common approaches to manufacture polymer microfluidic devices. The advantages of using micromilling for polymer microfluidic devices include shorter fabrication process, lower cost, easier user interface, and being capable of fabricating complicated structures, which make micromilling a perfect tool in research idea testing and validation. The aim of this study is to understand the impact of each micromilling parameter to the surface roughness on a polycarbonate substrate, followed by the factor analysis to determine the optimal cutting conditions. The parameters included spindle speed, feed rate, and the depth of cut, and the roughness was measured by a stylus profilemeter. The smallest roughness achieved was 0.127 µm with the spindle speed of 20,000 rpm, feed rate of 300 mm/min, and the depth of cut of 10 µm. Factor analysis was used to determine that the spindle speed has the largest impact while the depth of cut has the minimized impact to the surface quality. To further confirm the optimal cutting conditions, twelve reservoirs were micromilled with the optimal cutting conditions and the average roughness is 0.14 µm with a stand deviation of 0.08 µm.

PU.1 Is Identified as a Novel Metastasis Suppressor in Hepatocellular Carcinoma Regulating the miR-615-5p/IGF2 Axis

Song, Li-Jie,Zhang, Wei-Jie,Chang, Zhi-Wei,Pan, Yan-Feng,Zong, Hong,Fan, Qing-Xia,Wang, Liu-Xing Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.9

Invasion and metastasis is the major cause of tumor recurrence, difficulty for cure and low survival rate. Excavating key transcription factors, which can regulate tumor invasion and metastasis, are crucial to the development of therapeutic strategies for cancers. PU.1 is a master hematopoietic transcription factor and a vital regulator in life. Here, we report that, compared to adjacent non-cancerous tissues, expression of PU.1 mRNA in metastatic hepatocellular carcinoma (HCC), but not primary HCC, was significantly down-regulated. In addition, levels of PU.1 mRNA in metastatic hepatoma cell lines MHCC97L and MHCC97H were much lower than in non-metastatic Hep3B cells. Transwell invasion assays after PU.1 siRNA transfection showed that the invasion of hepatoma cell lines was increased markedly by PU.1 knockdown. Oppositely, overexpression of PU.1 suppressed the invasion of these cells. However, knockdown and overexpression of PU.1 did not influence proliferation. Finally, we tried to explore the potential mechanism of PU.1 suppressing hepatoma cell invasion. ChIP-qPCR analysis showed that PU.1 exhibited a high binding capacity with miR-615-5p promoter sequence. Overexpression of PU.1 caused a dramatic increase of pri-, pre- and mature miR-615-5p, as well as a marked decrease of miR-615-5p target gene IGF2. These data indicate that PU.1 inhibits invasion of human HCC through promoting miR-615-5p and suppressing IGF2. These findings improve our understanding of PU.1 regulatory roles and provided a potential target for metastatic HCC diagnosis and therapy.

Quality of root canal fillings using three gutta-percha obturation techniques

Edith Siu Shan Ho,Jeffrey Wen Wei Chang,Gary Shun Pan Cheung 대한치과보존학회 2016 Restorative Dentistry & Endodontics Vol.41 No.1

Objectives: The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction. Materials and Methods: Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance. Results: The overall mean volume fraction of gutta-percha was 68.51 ± 6.75% for CL, 86.56 ± 5.00% for UL, and 88.91 ± 5.16% for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group. Conclusions: WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.

Suppression of CDK2 expression by siRNA induces cell cycle arrest and cell proliferation inhibition in human cancer cells

( Xiang E Long ),( Zhao Hui Gong ),( Lin Pan ),( Zhi Wei Zhong ),( Yan Ping Le ),( Qiong Liu ),( Jun Ming Guo ),( Jiu Chang Zhong ) 한국생화학분자생물학회 (구 한국생화학회) 2010 BMB Reports Vol.43 No.4

Cyclin-dependent kinase 2 (CDK2) is a member of serine/threonine protein kinases, which initiates the principal transitions of the eukaryotic cell cycle and is a promising target for cancer therapy. The present study was designed to inhibit cdk2 gene expression to induce cell cycle arrest and cell proliferation suppression. Here, we constructed a series of RNA interference (RNAi) plasmids which can successfully express small interference RNA (siRNA) in the transfected human cells. The results showed that the RNAi plasmids containing the coding sequences for siRNAs down-regulated the cdk2 gene expression in human cancer cells at the mRNA and the protein levels. Furthermore, we found that the cell cycle was arrested at G0G1 phases and the cell proliferation was inhibited by different siRNAs. These results demonstrate that suppression of CDK2 activity by RNAi may be an effective strategy for gene therapy in human cancers. [BMB reports 2010; 43(4): 291-296]

Parameter Optimization of Micromilling Brass Mold Inserts for Microchannels with Taguchi Method

Pin-Chuan Chen,Yu-Chieh Chen,Chang-Wei Pan,Kuan-Ming Li 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

Achieving excellent quality of micromilled surfaces usually requires additional efforts and cost, and Taguchi methodology is anefficient tool in the parameter optimization process. The aim of this study is to explore the optimal cutting parameters for minimalsurface roughness of a micromilled brass mold inset, and the controlling parameters included coolant, spindle speed, feed rate, depthof cut, and the stepover. An orthogonal array and factor analysis were carried out to identify the optimal cutting combination, andthis combination included air coolant, spindle speed of 45,000 rpm, feed rate of 100 mm/min, stepover of 10% of milling bit diameter,and the depth of cut of 5 μm. To further confirm the analysis, multiple confirmation runs were realized and the averagely measuredsurface roughness was 0.03 μm with a stand deviation of 0.004 μm.

The mitochondrial genome of the Kentish Plover Charadrius alexandrinus (Charadriiformes: Charadriidae) and phylogenetic analysis of Charadrii

Wan Chen,Chenling Zhang,Tao Pan,Wei Liu,Kexin Li,Chaochao Hu,Qing Chang 한국유전학회 2018 Genes & Genomics Vol.40 No.9

The suborder Charadrii (Aves: Charadriiformes), one of the most species-rich radiations within shorebirds, which contains good source for studies of ecology, behaviour and evolution. The resources of mitogenome have rapidly accumulated in recent years due to the advanced genomic sequencing, while suborder Charadrii’s mitogenome has not been well studied. The primary objective of this study was to determine the complete mitogenome sequence of Charadrius alexandrinus, and investigated the evolutionary relationship within Charadrii. The mitogenome of C. alexandrinus were generated by amplification of overlapping Polymerase Chain Reaction (PCR) fragments. In this study, we determined the complete mitogenome sequence of the Kentish Plover Charadrius alexandrinus, and comparative analysed 11 species to illustrate mitogenomes structure and investigated their evolutionary relationship within Charadrii. The Charadrii mitogenomes displayed moderate size variation, the mean size was 16,944 bp (SD = 182, n = 11), and most of the size variation due to mutations in the control region (CR). Nucleotide composition was consistently biased towards AT rich, and the A+T content also varies for each protein-coding genes. The variation in ATP8 and COIII was the highest and lowest respectively. The GC skew was always negative, with the ATP8 had higher value than other regions. The average uncorrected pairwise distances revealed heterogeneity of evolutionary rate for each gene, the COIII, COI and COII have slow evolutionary rate, whereas the gene of ATP8 has the relative fast rate. The highest value of Ks and Ka were ND1 and ATP8, and the ratios of Ka/Ks are lower than 0.27, indicating that they were under purifying selection. Phylogenomic analysis based on the complete mitochondrial genomes strongly supported the monophyly of the suborder Charadrii. This study improves our understanding of mitogenome structure and evolution, and providing further insights into phylogeny and taxonomy in Charadrii. In future, sequencing more mitogenomes from various taxonomic levels will significantly improve our understanding of phylogenetic relationships within Charadrii.