http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
그물형 안테나의 고어 개수에 따른 Radio Frequency (RF) 특성 분석
김진혁,이시아,박태용,최한솔,김홍래,채봉건,오현웅,Kim, Jin-Hyuk,Lee, Si-A,Park, Tae-Yong,Choi, Han-Sol,Kim, Hongrae,Chae, Bong-Geon,Oh, Hyun-Ung 한국우주과학회 2021 우주기술과 응용 Vol.1 No.3
본 논문에서는 초소형 위성에 적용할 수 있는 전개형 메쉬 안테나의 Gore 특성에 따른 radio frequency (RF) 특성 변화에 관해 논한다. 메쉬 안테나의 경우 다양한 초소형위성에 탑재할 수 있으며, 통신/영상레이다/SIGINT 등 다양한 우주임무에 활용이 가능하다. 이상적인 안테나 곡면을 형성하기 위해서는 충분한 개수의 안테나 Rib 구조로 반사판을 구현해야 한다. 그러나 안테나 Rib 개수 증가에 따라 안테나 질량을 비롯해 기계적인 전개 메커니즘의 복잡도 및 전개 신뢰성 등 다양한 설계인자에 영향을 미치게 된다. 본 논문에서는 안테나의 RF 성능 열화 최소화 관점에서 적정 안테나 Rib의 개수를 도출하기 위해 메쉬 안테나의 예시 모델을 대상으로 다양한 Rib 개수에 따른 RF 시뮬레이션을 통해 비교분석을 수행하였다. This research discusses the change in radio frequency (RF) characteristics according to the number of Gores on the deployable mesh antennas for potential micro-satellite applications. The deployable type of lightweight mesh antenna can be used for various space missions such as communication/SAR/ SIGINT. In order to implement an ideal curvature of antenna surface, sufficient number of antenna rib structures are required. However, the increase in antenna ribs affects various design factors of the antenna system, especially total system mass, complexity of deployable mechanism and reliability. In this paper, the proper number of ribs for the mesh antenna were derived by comparison of electro-magnetic (EM) simulation results of example of antenna model in accordance with the various number of ribs.
김진혁(Jin-Hyuk Kim),최재호(Jae-Ho Choi),김광용(Kwang-Yong Kim) 한국유체기계학회 2008 유체기계 연구개발 발표회 논문집 Vol.2008 No.-
In this paper, shape optimization based on three-dimensional flow analysis has been performed for impeller design of centrifugal compressor. To evaluate the objective function of an isentropic efficiency, Reynolds-averaged Navier-Stokes equations are solved with SST (Shear Stress Transport) turbulence model. The governing equations are discretized by finite volume approximations. The optimization techniques based on the radial basis neural network method are used for the optimization. Latin hypercube sampling as design of experiments is used to generate thirty design points within design space. Sequential quadratic programming is used to search the optimal point based on the radial basis neural network model. Four geometrical variables concerning impeller shape are selected as design variables. The results show that the isentropic efficiency is enhanced effectively from the shape optimization by the radial basis neural network method.
중앙콘트롤 제어가 가능한 대용량 LED 조명 PWM 조도제어 설계
김진혁(Jin-Hyuk Kim),김준석(Jun-Suk Kim),박만식(Man-Sik Park),김민영(Min-Young Kim) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
본 논문에서는 인텔리젼트 빌딩 등에 사용할 수 있는 에너지 절감용 중앙집중식 LED조명 디밍제어 방식에 대하여 연구하였다. 한 유닛 당 200W급 대용량 LED 전원장치를 최대 4개를 중앙제어가 가능하도록 시스템을 구성하였으며, 각 유닛은 RS485 통신을 이용하여 외부 광량에 따른 차등 조명을 실시함으로써 최대한의 에너지가 절감되도록 시스템을 구성하였다.
해상 풍력발전단지에서 뇌격 시 서지어레스터 열화로 인한 연계 고장 분석
김진혁(Jin-Hyuk Kim),김규호(Kyu-Ho Kim),이재균(Jea-Kyun Lee),우정욱(Jung-Wook Woo) 대한전기학회 2018 전기학회논문지 Vol.67 No.10
One of the ways to improve the stability of power facilities used in power systems is to use power surge arresters and to protect against transient overvoltages and surges in normal operation. Also it is important to reduce the impact of lightning strikes because lightning can create overvoltage in the grid of the wind turbine and affect power quality. So This paper analyzes the effects of overvoltage and adjacent turbines due to single strike and multi strike to ground impedance changes when the surge arrester is deteriorated in a wind power farm.