http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저온 탄화로 실링 챔버내 유로의 형상변화에 따른 내부유동 특성에 관한 연구
고동국(Dong-Guk Ko),압드엘모타립 하마다(Hamada Abdelmotalib),김민우(Min-Woo Kim),이교우(Gyo-Woo Lee),임익태(Ik-Tae Im) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
This paper studies the flow characteristics inside the low-temperature carbonization furnace(LTF) including sealing chamber with labyrinth. The flow behavior inside the furnace was analyzed according to different labyrinth shapes. The effects of labyrinth baffle number, and clearance between upper and lower baffles in the sealing chamber were investigated. The large vortex and recirculation region are generated in the chamber when the baffles of the upper and lower surfaces in the labyrinth are maintained at regular intervals. As a result, the gas discharge flow rate can be reduced by 60.8% when the flow distance between baffle and baffle in labyrinth is reduced to 25% of the baffle length.
원추형 유동층 연소기의 수력학적 특성 및 열전달에 항력 모델이 미치는 영향에 대한 연구
강승모(Seung Mo Kang),Hamada Abdelmotalib,고동국(Dong Guk Ko),박외철(Woe-Chul Park),임익태(Ik-Tae Im) 대한기계학회 2015 大韓機械學會論文集B Vol.39 No.11
본 연구에서는 서로 다른 항력 모델이 원추형 유동층 연소기 내의 수력학적 특성과 열전달 현상에 미치는 영향에 대해, 입자상 유동에 대한 분자운동론을 적용한 오일러-오일러 모델을 사용하여 수치해석적으로 연구하였다. Gidaspow 항력 모델과 Syamlal-O’Brien 항력 모델에 대해 유입 공기의 속도와 입자의 크기를 변화시키면서 연소기 내의 압력강하나 베드 팽창률 및 벽과 베드 사이의 열전달 계수의 변화를 조사하였다. 그 결과 베드의 팽창률은 속도가 증가함에 따라 커졌으며 압력강하는 속도의 증가에 따라 감소하였다. 벽과 베드 사이의 열전달 계수는 유입 속도가 증가하면 증가하고 입자의 크기가 증가하면 감소하는 것으로 나타났다. 베드의 팽창률이나 압력 강하와 같은 수력학적 특성은 항력 모델에 큰 영향을 받지 않았으나 열전달 계수는 항력 모델에 따라 차이가 나타났다. In this study, wall to bed heat transfer and hydrodynamic characteristics in a conical fluidized bed combustor was investigated using computational fluid dynamics method. A two-fluid Eulerian-Eulerian model was used with applying the kinetic theory for granular flow(KTGF). The effects of the two drag models, Gidaspow and the Syamlal-O"Brien model, different inlet velocities(1.4Umf~4Umf) and different particle sizes on the hydrodynamics and heat transfer were studied. The results showed that the hydrodynamic characteristics such as bed expansion ratio and pressure drop were not affected significantly by the drag models. But the heat transfer coefficient was different for the two drag models, especially at lower gas inlet velocities and small particle sizes.