http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중유회 탈취패널에 있어서 활성탄과 규조토의 탈취성능 영향평가
김민호(Min Ho Kim),김영규(Young Kyu Kim),Kenneth N. Han,김세중(Se Jung Kim),김남수(Nam Soo Kim),홍성엽(Seong Yeup Hong),한혜철(Hyea Chul Han) 大韓環境工學會 2010 대한환경공학회지 Vol.32 No.6
본 연구는 발전소등에서 발생하는 중유회를 재활용한 탈취패널 제조시 활성탄, 규조토등의 첨가제를 활용함으로써 포름알데히드 및 톨루엔에 대한 제거성능을 향상시켜 중유회의 탈취패널 원료로서의 사용가능성을 확인하였다. 단일 첨가제를 사용하여 제작된 중유회 재활용 탈취패널의 경우 포름알데히드에 대해서는 93% 이상, 톨루엔에 대해서는 97% 이상의 제거성능을 보였으나 기준 패널에 비하여 압축강도가 27~63% 감소하였다. 반면에 두 가지 첨가제를 여러 가지 비율로 혼합하여 제조된 것 중 활성탄과 규조토가 5 wt%씩 첨가된 패널은 포름알데히드 84%, 톨루엔 96%의 제거성능을 보였으며 압축 강도는 기준패널보다 32%증가하였다. 따라서 첨가제의 혼합사용을 통하여 중유회재활용 탈취패널을 제조할 경우 유해가스 제거성능과 패널의 강도를 향상 시키는 것이 확인되었다. This study aims to examine the possible use of heavy oil fly ash as raw material for deodorization panels by adding additives such as activated carbon and diatomite during deodorization panel manufacturing process and improving the performance of formaldehyde and toluene elimination. The recycled heavy oil flyash deodorization panel to be used either of them as additives removed more than 93% of formaldehyde and more than 97% of toluen but the compressive strength was decreased 27 to 63%. In an experiment to be used both additives, Whereas, the panel to include activated carbon 5% and diatomite 5% removed 84% against formaldehyde and 96% against toluen, and the compressive strength was increased 32% better than standard panel. Therefore it could be confirmed that the recycled heavy oil flyash deodorization panel is increased the compressive strength and the removal efficiency against harmful chemical substances by using the additives mixture.
Silver Paste 를 이용한 Solar Cell 은 전극 제조
김영규(Young Kyu Kim),정태의(Tae Eui Jeong),오동훈(Dong Hoon Oh),김남수(Nam Soo Kim),홍성엽(Seong Yeup Hong) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.12
화석에너지의 고갈로 인한 대체 에너지 연구는 최근 수십 년 동안 계속 행해지고 있다. 원자력에너지와 비교해서 낮은 전기발생 효율에도 불구하고, 환경친화적이며 태양이라는 영구성으로 태양에너지는 주목 받고 있다. 본 논문에서는 태양전지의 효율에 가장 영향을 미치는 인자로 햇빛 입사각의 변화와 Top Connector 형상이라 가정하고 MATLAB 과 MathCAD 를 이용하여 모사하였다. 실험모사 결과 상용화 제품인 500㎛ 선폭, 5㎛ 높이 Top Connector 형상과 비교하여, 최고 10%의 태양전지 효율증가는 Top Connector 후막 두께가 25~50 ㎛, 선폭 두께가 50~100um 영역에서 찾을 수 있었다. 10 만 cps 의 점도를 갖는 은페이스를 500um 의 MDDW (Micro-Dispensing Deposition Writing) 직접분사 노즐을 이용하여 성공적으로 25 um 후막을 형성하였다. Studies on alternative energy have been carried out for many decades because of the accelerated exhaustion of fuel. While the efficacy of solar cells is still low in comparison with that of nuclear power, solar cells have been highlighted as potential sources of alternative energy because they are environmentally friendly and have a source of unlimited energy, namely, the sun. In this study, the optimum efficiency of solar cells was simulated as a function of the incident angle of sunlight and the geometric shapes of patterns using MATLAB and MathCAD software. The foremost efficiency of the solar cell was found to be 1.10 when the thickness and width of the patterns were in the range 25?50 ㎛ and 50?100 ㎛, respectively. To achieve the 25 ㎛ thick layer, 100,000 cps silver paste and 500 ㎛ orifice tip has been successfully implemented with Micro-Dispensing Deposition Writing.