http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최종기(Jong-Kee Choi),김동명(Dong-Myoung Kim),이형수(Hyung-Soo Lee),심건보(Keun-Bo Shim),김경철(Kyung-Chul Kim) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.1
콘크리트 전주는 배전선로 지지물로서 널리 사용되고 있다. 전주의 접지저항을 규정치 이내로 유지하기 위하여 동피복 접지봉을 포함한 여러 종류의 접지전극들이 사용되어 왔다. 전주 내부에는 철근이 들어있기 때문에 지중에 매설되는 전주 하단은 어느 정도 구조체접지극으로서 작용을 하게 된다. 본 논문에서는 전주 접지선으로 시험전류를 주입하면서 주입되는 전류와 금속 접지극으로 분류되는 전류를 각각 측정하였다. 이로써 전주 구조체로 분류되는 전류의 간접측정이 가능하였다. 측정결과에 근거하여 금속 접지극의 접지저항과 전주 구조체로 분류되는 전류크기 간의 상관관계를 분석하였다. Concrete poles(CP) are popular supports for distribution lines. Various types of grounding electrode, such as copper-clad rods, have been used to maintain CP’s ground resistance under the required value. The buried part of CP can also have structural grounding effect because of its iron reinforcing rods inside CPs. In this paper, we measured the total ground current injected into CP ground while measuring the ground current spliting to the metal electrode as well as the total injecting current, By this, it was able to measure the ground current splitting to CP structure. Based on the measured results, interrelationship between ground resistance of metal electrodes and current split factor to CP structure was analyzed.
MATLAB 프로그램을 이용한 배전계통에 사용되는 동봉 접지전극의 과도 접지임피던스 특성 분석
김경철(Kyung-Chul Kim),오경훈(Kyung-Hoon Oh),이규진(Kyu-Jin Lee),심건보(Keun-Bo Shim),최종기(Jong-Kee Choi) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.9
비록 접지저항은 접지전극의 접지성능을 좌우하는 지수이기는 하지만, 과도상태에서는 접지 성능을 반영하지 못한다. 동봉은 배전계통에서 가장 많이 쓰이는 접지전극이다. 본 논문에서는 동봉의 접지 임피던스를 주파수 60[㎐] 에서 100[㎑] 범위까지 측정하여 등가 접지임피던스 모델을 구하였다. 뇌격서지가 유입되었을 때 MATLAB 프로그램으로 과도접지임피던스의 수치와 파형을 시뮬레이션하였다. Although a ground resistance is a good index of grounding performance for grounding electrodes, it does not reflect the grounding performance during transient state. A copper rod electrode is the most commonly used grounding electrode in electric distribution systems. In this paper, the grounding impedance of copper rods has been measured in frequency raging from 60[㎐] up to 100[㎑] and an equivalent model of the grounding impedance is identified from the measured values. The grounding impedance under study when a typical lightning surge is injected into the grounding system was simulated numerically and graphically through the use of the MATLAB software program.
최선규(Sun-Kyu Choi),최종기(Jong-Kee Choi),정금영(Geum-Young Jung),김경훈(Kyoung-Hun Kim),심건보(Keun-Bo Shim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
변전소 지락고장시 구내에서 인체안전의 확보를 위해 접촉, 보폭전압을 검토하여 안전허용치 이하가 되도록 접지망을 설계하고 있다. 그러나 다중접지 배전계통의 지락(고 · 저압혼촉)고장시 배전선로 전주에 인체가 접촉하였을 경우의 위험전압을 검토한 사례는 없다. 따라서, 본 논문에서는 고장시 인체가 전주에 접촉했을때 발생될 수 있는 위험전압을 계산하기 위한 간단한 수계산식을 제안하기 위하여 검토 모델링과 모델에 필요한 파라미터를 실계통 운전조건을 고려하여 반영하였으며, 배전계통에서 발생할 수 있는 가능한 가혹한 조건을 가정하여 위험전압을 검토하였다.