http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PHPP를 활용한 일반 목조주택과 목조 패시브하우스의 난방에너지 성능 비교 분석
유슬기(Yu, Seul-Gi),김석환(Kim, Sug-Hwan),서정기(Seo, Jung-Ki),김수민(Kim, Su-Min) 대한건축학회 2013 대한건축학회논문집 Vol.29 No.8
In recent times, it has been an increased demand of wood frame house in Korea due to their environmental performance and economic feasibility. Most of the passive houses in Europe have been made of wood and showed superior energy performance. To improve thermal performance of Korean wood frame house in the level of passive houses, analysis of thermal properties such as heat gain, heat loss, and annual heat demand was conducted between Korean wood frame house and wooden passive house using PHPP (Passive House Planning Package) 2007 program. PHPP is excel-based program to calculate anuual heat demand based on DIN EN 832 and EN regulations of European Union. The simulation results showed that annual heat demand of Korean wood frame house was 78 kWh/m²a and most of the heat loss was transmission heat loss of windows because of their low thermal resistance. Detailed and advanced criteria for Korean wood frame house are needed in the future to save building energy and maintain comfortable indoor environment.
주기적으로 작동하는 위성부품 열제어용 열적완충질량과 이를 대체할 상변화물질을 이용한 열제어부품의 비교연구
김택영(Taig Young Kim),서정기(Jung Gi Seo),현범석(Bum-Seok Hyun),전형열(Hyeong Yul Cheon),이장준(Jang-Joon Lee) 한국항공우주학회 2014 韓國航空宇宙學會誌 Vol.42 No.12
저궤도 관측위성에 탑재된 영상처리장치의 온도제어를 위하여 사용하는 열적완충질량을 대체할 수 있는 상변화물질의 성능에 대하여 수치해석적으로 분석하였다. 관측위성에 사용되는 고정밀 영상처리장치는 임무에 따라 주기적으로 작동하며 발열량이 매우 큰 반면, 온도에 민감하여 작동허용 온도범위가 매우 좁다. 이러한 장치의 온도를 제어하기 위하여 국산 저궤도 관측위성에서는 열적완충질량을 이용하여 부품의 온도변화 시상수를 증가시키는 효율적인 설계를 적용하였지만, 질량이 증가하는 단점이 있다. 본 연구에서는 질량을 최소화하며 부품 온도를 안정적으로 유지할 수 있도록 고상-액상 상변화물질을 이용한 열제어 장치를 제안하였으며, 수치해석을 통하여 열적 완충질량에 대한 유효성을 비교/검증하였다. 상변화물질을 이용한 열제어 장치는 열적완충질량을 대체하여 효과적인 온도제어가 가능할 뿐 아니라 질량도 열적완충질량의 약 12% 정도로 감소시킬 수 있었다. Solid-liquid Phase Change Material(PCM) as a thermal control hardware for the electro-optical payload of low earth orbit satellite is numerically studied which can be substituted with Thermal Buffer Mass(TBM). The electro-optical module in LEO satellite is periodically work and high heat is dissipated during the imaging period, however, the design temperature range is very tight and sensitive. In order to handle this problem TBM is added and as a result the time constant of the module temperature increases. TBM is made of Al6010 and its mass directly affects the system design. To save the mass PCM is suggested in this study. The latent heat of melting or solidification is very high and small amount of PCM can play a role instead of TBM. The result shows that only 12% of TBM mass is enough to control the module temperature using PCM.
목조건축물 구조부재의 열전도율에 따른 건물외피의 단열 성능
김석환 ( Sug Hwan Kim ),유슬기 ( Seul Gi Yu ),서정기 ( Jung Ki Seo ),김수민 ( Su Min Kim ) 한국목재공학회 2013 목재공학 Vol.41 No.6
국내에서 주로 사용되고 있는 건물에너지 성능평가 시뮬레이션 마다 상이한 재료의 열전도율로 평가 되고 있음이 파악되었다. 시뮬레이션을 통한 정확한 건물에너지부하를 평가하기 위하여, 각 시뮬레이션에서 목조건축물의 스터드로 사용되고 있는 목재의 열전도율을 확인하고, 이에 따른 벽체의 열관류율과 부재 접합부위에서의 선형열교 차이를 연구하였다. 각 시뮬레이션은 동일 수종에 대해 상이한 열전도율을 채택 후, 각 시뮬레이션에서추출한 열전도율 간의 차이가 가장 상이한 소나무의 열전도율을 스터드에 적용하였다. 시뮬레이션 간 지붕, 벽체, 지면 슬래브의 열관류율 중 최대오차는 0.023 W/m2·K이었으며, 지붕의 서까래 접합부, 지붕-벽체 접합부, 지면슬래브-벽체 접합부 중 최대 선형열교 오차는 0.025 W/m·K이었다. 또한, HEAT2 정상상태전열해석 프로그램을 활용하여 선형열교 및 벽체의 온도변화에 대한 전열해석 이미지를 분석하였다. 구조체에 온도 분포를 선으로 표시하여 단열이 부족한 곳에서는 온도선이 급격하게 변하는 것이 확인되었고, 온도선이 급격하게 변하는 부위에서는 다른 곳보다 온도가 낮으며, 다른 구조체 부분보다 더 많은 열류가 손실됨이 확인되었다. Building energy simulations which are mainly used in Korea have evaluated the building energy performance with the different thermal conductivity of construction materials. In order to evaluate the energy consumption accurately, the difference in thermal conductivity of the wood used in stud for wooden structure was confirmed from the each simulation. In addition, the thermal transmission of building members and the thermal bridge at the conjunction of building members according to thermal conductivity from each simulation programs were researched. The thermal conductivity of pine that has the largest variation among the energy simulation was applied to the thermal properties of studs in wooden structure. The maximum error between the maximum and minimum thermal transmission of roof, wall, and floor slab was 0.023 W/m2?K. Plus, that thermal bridge at Rafter junction on the roof, roof-wall joint, and floor slab-wall joint, and floor slab-wall joint was 0.025 W/m2·K. The heat transfer image for changes in temperature and the heat exchange were analyzed by HEAT2 program. The distorted temperature lines were found around the insufficient insulated connection parts. It was predicted that the temperature at the distorted parts in the analyzed image was lower than that of the other portion of the other structures.
응고/융해 잠열을 이용한 위성용 열제어장치의 실험적 연구
김태수(Tae Su Kim),신윤섭(Yoon Sub Shin),김택영(Taig Young Kim),서정기(Jung-gi Seo),현범석(Bum-Seok Hyun),전형열(Hyeong Yul Cheon) 한국항공우주학회 2016 韓國航空宇宙學會誌 Vol.44 No.10
고상-액상 상변화물질(PCM, Phase Change Material)을 이용한 위성부품 열제어장치를 설계 및 제작하였으며 열환경시험을 수행함으로써 온도제어 성능을 분석하였다. 설계온도에 부합하는 n-Hexadecane을 PCM으로 채용하였고, 낮은 열전도도를 보완하기 위하여 내부에 전열휜이 장착된 용기를 Al6061로 제작하였다. 위성에 장착하였을 때와 동일한 작동조건을 확보하기 위하여, 부품과 방열판 사이를 열관으로 연결하였으며 열관의 단열부가 관통하도록 PCM 열제어장치를 설치하였다. 동일한 모양과 부피의 열적완충질량(TBM, Thermal Buffer Mass)도 제작하여, 주기적인 가열-냉각 실험을 수행하였다. 실험결과 상변화 잠열에 의한 PCM의 열제어 성능을 확인할 수 있었으며, TBM에 비하여 질량과 보온히터의 소모전력을 절감할 수 있음을 확인하였다. The thermal control device using solid-liquid phase change material (PCM) is designed, manufactured, and experimented in thermal environment chamber. The n-Hexadecane is selected as a PCM and its melting point is placed within the component working temperature range. The PCM container is made of Al6061 and has the thermal spreading fins inside. To simulate the working condition for on-orbit satellite the heat pipes are used to connect the heater and radiator and the PCM thermal control device (PCMTD) is installed at the middle portion of heat pipes. The thermal buffer mass (TBM), which is same configuration and volume with PCMTD, is also manufactured to compare the thermal control performance. As a result, the PCMTD is not only more efficient than TBM in their temperature control features but both mass and power of compensation heater are reduced.
신발산업의 네트워크형성요인,관계몰입 및 조직유효성 간의 구조관계에 관한 연구
오경태(Oh, Kyung Tae),천종기(Cheon, Jong Ki),서정기(Seo, Jung Gi),신용존(Shin, Yong John) 한국인적자원관리학회 2010 인적자원관리연구 Vol.17 No.1
본 연구는 신발산업의 네트워킹과 관련하여 네트워크조직의 의의,네트워크조직의 형성과 관련된 이론,네트워크조직의 관계몰입 그리고 네트워크조직 유효성 동을 고찰하고 그 메커니즘에 대한 실증적 검증을 시도함으로써 네트워크조직 형성의 영향요인과 관계몰입,그리고 조직유효성의 구조적 관계에 있어서 각각의 변수가 서로 어떠한 영향을 미치는지 검토하였다. 실종분석결과 네트워크조직 형성 영향요인으로서의 신뢰,정보공유,경쟁,그리고 상호의존성은 네트워크 관계몰입에 정의 영향을 미치는 것으로 실증되었고,나아가 네트워크 관계몰입은 관계만족도와 관계지속성의 네트워크 조직유효성에 정의 영향을 미치는 것으로 나타났다. Currently, Many footwear companies in Busan have chosen the cooperation relationship through the network organization as a way to survive in dynamic changing business environment. This situation needs to understand the meaning or significance of network organization, main theories with construction of network, many studies concerning relationship quality and effectiveness of network orgarnization. The research problem of this study are two issues about how do which factors constructing network organization effect on the relationship commitments of it, and how do those commitments effect on the effectiveness of it. Therefore, the primary purpose of this study is to verify empirically the mechanism of the network organization in Korean footwear industry, focused on relationship among firms participating in the network.According to this research model, the following hypotheses are able to be developed for the statistical tests: Hypothesis 1: The influencing factors of constructing network organization would have an effect on positively the relationship commitment of network organization in footwear industry Hypothesis 2: The relationship commitment of network organization would have an effect on positively the effectiveness of network organization in footwear industry. The result of statistical analysis shows the basis to be able to adopt hypothesis 1 and 2 by the structural equation modeling. It is clear therefore the analytic result shows considerable statistical significance. The result of test in hypothesis 1 shows that when trust, information sharing between participated firms, circumstances of market competition, and interdependence with partner firm at influencing factors of constructing network are higher, relationship commitment of network organization would be higher. However it shows that the factor of market transaction cost does not effect on relationship commitment. The result of test in hypothesis 2 shows that when the relationship commitment is higher, relationship satisfaction and continuance of network organization would be higher. This means the relationship commitment leads positive effect on effectiveness of network organization.
상변화물질과 열관을 병렬 조합한 위성부품 열제어장치의 수치해석적 연구
신윤섭(Yoon Sub Shin),김태수(Tae Su Kim),김택영(Taig Young Kim),서영배(Young Bae Seo),서정기(Jung-gi Seo),현범석(Bum-Seok Hyun),전형열(Hyeong Yul Cheon) 한국항공우주학회 2016 韓國航空宇宙學會誌 Vol.44 No.4
주기적 단속적으로 작동하는 위성부품의 열제어를 위하여 고상-액상 상변화물질(PCM, Phase Change Material)과 열관을 병렬로 결합한 열제어장치를 제안하였으며, 이의 성능을 수치해석을 통하여 검증하였다. 상변화 중 큰 잠열과 일정하게 유지되는 온도에 의하여 작은 방열판 면적에서도 부품의 최고온도를 제어할 수 있으며, 냉각기에는 PCM에 축적된 에너지가 방출됨으로써 보온히터 소모전력을 절약할 수 있다. 동일한 형태의 Al TBM(Thermal Buffer Mass)을 사용하면 비슷한 효과를 기대할 수 있으나, 질량과 보온히터의 소모전력이 증가하므로 PCM에 비하여 비효율적이다. 설계된 PCM 열제어장치는 발열량과 작동시간에 따라 그 양을 최적화할 수 있다. The thermal control device for the periodic working component combined solid-liquid phase change material (PCM) with heat pipes is designed and numerically studied. Due to high latent heat and retaining constant temperature during melting process the component peak temperature, not withstanding small radiator size, is reduced. The warm-up heater power consumption to keep the minimum allowed temperature is also cut down since the accumulated thermal energy is released through the solidification. The thermal buffer mass (TBM) made of Al can give the similar effect but the mass and power consumption of warm-up heater should increase compared to PCM. The amount of PCM can be optimized depending on the component heat dissipation and on/off duty time.