http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mesophase Formation from Pitch
이보성(Bo Sung Rhee),유승곤(Seung Kon Ryu),주혁종(Hyeok Jong Joo),류해일(Ha Ill Ryu) 대한공업교육학회 1983 대한공업교육학회지 Vol.8 No.2
한국산 핏치를 원료로 하는 탄소섬유를 제조할 목적으로 핏치 추출실험을 행하였다. 그로부터 우리는 탄소를 많이 포함하는 원료물질을 얻을 수 있었다. 또한 그들의 화학적 성분을 밝히기 위하여 원소분석기와 분광분석기로 분석하였으며, 그 결과 평균 분자 구조를 상세히 밝힐 수 있었다. Hot Stage 관찰에서 균일하고 큰 분자를 포함하는 분별된 샘플들이 좋은 mesophase를 형성하였다. 그 온도는 400℃ 이상이었다. 이러한 실험적 결과를 통하여 한국 핏치로부터 탄소섬유를 제조하기 위한 실험적 조건을 얻을 수 있었다.
이보성(B . S . Rhee),김혜영(H . Y . Kim) 대한공업교육학회 1985 대한공업교육학회지 Vol.10 No.1
Ultrasonic(generator : 20㎑, 700W, 220V, 0.5KAV, horn dia. 4Cm, Kyungil ultrasonics Co.,) dispersion of coal-water mixture was studied with respect to hydraulic head of mixture, vessel/horn diameter, density, and concentration of dispersion materials. In general, dispersion time was much shortened in comparison with conventional mechanical stirring system, and stability of dispersed phase was remarkable. Especially, ultrasonic irradiation was effective when the hydraulic head of mixture was proportional to wavelength of ultrasonic in water, and the ratio of vessel/horn diameter approaches to 1.
高溫에 있어서의 Pyrokohlenstoff의 熱 및 電氣傳導度測定
이보성,B. Rhee,H. Saihune 대한화학회 1971 대한화학회지 Vol.15 No.5
In der vorliegenden Arbeit wurde eine nach der von LLEWELLYN/HOPKINS entwickelten Direktheizmethode modifizierte Versuchsanlage konstruiert und zu Warme- und elektrische Leitfahigkeitsmessungen von Pyrokohlenstoff bei hohen Temperaturen verwendet. Die gemessenen Werte der Warme- und elektrischen Leitfahigkeit fur die bei der Abscheidung von Pyrokohlenstoff bei der Temperaturen von $1500^{\circ}$ bis $1700^{\circ}C$ erhaltenen Normal- und Spiralpyrokohlenstoff wurden mit den Literaturwerten des Hochregenerativpyrokohlenstoffes verglichen. Es wurden gefunden, da${\beta}$ der Spiralpyrokohlenstoff nicht nur eine bessere Warme- und elektrische Leitfahigkeit hat als der Normalpyrokohlenstoff, sondern auch er zu dem bei $2100^{\circ}$ abgeschiedenen Hochregenerativpyrokohlenstoff uberwiegend konkurrieren konnte. 이 硏究는 LLewellyn/Hopkins에 依해 發展시킨 直接加熱方法을 適用하였으며 그들의 方法을 修正하여 裝置를 만들었고, 高溫에서 熱, 電氣傳導度測定에 利用하였다. $1500^{\circ}~1700^{\circ}C$에서 pyrokohlenstoff의 析出時얻은 normal-과 spiralpyrokohlenstoff에 對한 熱 및 電氣傳導度의 測定値를 Hochregenerativpyrokohlenstoff의 文獻値와 比較하였다. 그 結果 Spiralpyrokohlenstoff는 Normalpyrokohlenstoff 보다 더 좋은 熱 및 電氣傳導度를 가졌을 뿐만 아니라 $2100^{\circ}$에서 析出된 Hochregenerativpyrokohlenstoff와 경쟁할 수 있었다는 것을 發見하였다.
이보성,유승곤,김혜영,Rhee Bo Sung,Ryu Seung Kon,Kim Hae Yeong Korean Chemical Society 1978 대한화학회지 Vol.22 No.5
化學反應 수반하는 氣體吸着反應器의 設計에 가장 重要한 氣液界面間의 物質傳達係數와 面積을 測定하는데 자주 모델反應이 利用된다. 本硏究는 그 中에서 wetted wall column 에 sulfite-system을 dldydgkdu 特別히 氣液間의 接觸時間이 氣體吸着速道에 미치는 영향을 硏究 檢討하였다. 反應速道가 매우 빠르거나 늦으면 column의 길이에 따라서, 다시 말하면 接觸時間에 따라서 氣體吸着速道에 差異가 크다는 것을 發見했다. 反應速道恒數 $k_2=5.5{\times}10^6m^3/kmol{\cdot}s$ 近處에서는 이 差異가 없어진다. 換言하면 이런 條件下에서 裝置의 hydrodynamics가 氣體吸着速道에 無關해진다. 金屬 column 代身에 graphite column을 使用할 수 있다는 例證을 題示하였다. Model reactions were often applied in the measuring of the mass transfer coefficient and interfacial area between gas and liquid, which are the most important factors in the design of equipment for gas absorption accompanied with chemical reaction this study, wetted wall column was applied to the sulfite-system among the known model reactions. It was found that one could not ignore the effect of contact time on the determination of mass transfer coefficient and interfacial area. When the reaction rate is very high or very low, the differences of absorption rate would be very large in according to the length of column, that is to the contact time. But the effect of contact time was free about the rate constant $k_2=5.5{\times}10^6m^3/kmol{\cdot}s$, that means the rate of gas absorption become independent upon the hydrodynamics of the equipment. It has shown that instead of steel column could be applied the fine grain-graphite column.