http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고장력강의 부식피로에 미치는 용액온도의 영향에 관한 연구
유헌일 한국자동차공학회 1986 오토저널 Vol.8 No.1
A study has been made of the corrosion fatigue of high strength low alloy steel in 3.5% NaCl solution under tension stress for solution temperature being 25.deg. C, 55.deg. C and 85 .deg. C. The main results obtained are as follows; 1) The corrosion fatigue crack growth rate curve could be divided into the First Region, the Second Region and the Third Region. 2) The corrosion fatigue crack growth rates in the First Region and the Second Region were Arrhenius temperature-dependent in this test range. The apparent activation energies for the corrosion fatigue cack growth rate were found to be 2000cal/mol in the First Region and 3700 cal/mol in the Second Region. 3) Hematite (Fe$_{2}$O$_{3}$) as the hexahedral crystal and magnetite (Fe$_{3}$O$_{4}$) as the octahedral crystal were observed in the corrosion products on the corrosion fatigue fracture surface at 85.deg. C and the anode fusion seem to be generated in the crack tip region at high temperature. 4) The complex environment effect ratio which was defined by the ratio of fatigue crack growth rate in corrosion environment to that in air might be considered not only a criterion estimating the effect of environment quantitatively but also an important parameter in the selection of the design stress for the fail safe design. The complex environment effect was not greater than ten in this test.
유헌일,택목양삼 대한기계학회 1982 大韓機械學會誌 Vol.22 No.1
금속재료의 파괴에 대해 옛부터 많은 연구가 행해져 왔다. 그러나 실제의 구조부제에 따라서는 그 파괴가 순간적으로 생기는 경우가 많아서 그 파괴를 실험적으로 파악한다는 것은 어렵다. 그러나 최근 전자현미경의 진보로 파괴면을 관찰하는 일이 쉬워지고 파괴과정이나 그 미시기구가 더욱 충실히 밝혀지므로서 electronmicro-fractography 라 불리우는 학문체계가 형성되기에 이르 렀다. 따라서 본 해설에서는 금속재료의 파괴와 fractography에 대해 설명하고, 파괴역학의 기 초적개념에 관해서 해설하고, 최후로 하나의 응용으로 파괴사고의 사고예해석(case study)에 대한 개설을 하기로 한다.
유헌일,택목양삼 대한기계학회 1982 大韓機械學會誌 Vol.22 No.2
구조물의 사고해석과 안전설계에 대한 파괴력학의 응용에 관해 개설했다. 금후 파괴역학적 개 념을 고려한 새로운 설계곡선의 개발과 대형구조물 파괴제어관리법의 개발이 안전설계에 대한 중요과제의 하나라고 생각한다.