http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
일정한 응고속도를 갖는 2성분 응고에서 조성 대류의 특성 및 안정성
황인국 ( In Gook Hwang ) 한국화학공학회 2014 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.52 No.2
2성분 응고계에서 다공성 mush 층에서의 조성 대류는 생성되는 제품의 질에 영향을 준다. 본 연구에서는 일정한 속도로 응고되는 mush 층을 고려하였다. 선형 안정성 이론을 사용하여 mush 층에 대한 교란방정식을 유도하였고, 기본상태 온도장과 mush 층에서 기공률의 분포를 수치해법으로 조사하였다. 과열량이 클 때 mush 층의 두께는 열경계층의 두께에 비해 상대적으로 작았다. 과열량이 감소함에 따라 mush 층의 두께를 기준으로 한 Rayleigh 수는 증가하였고, mush층은 조성 대류에 대해 안정해졌다. mush 층의 윗면에 등온조건을 적용한 경우보다 온도 및 열속의 연속조건을 액체-mush 계면에 적용한 경우에 임계 Rayleigh 수가 더 작게 얻어졌다. In binary solidification compositional convection in a porous mushy layer influences the quality of the final products. We consider the mushy layer solidifying from below with a constant solidification velocity. The disturbance equations for the mushy layer are derived using linear stability theory. The basic-state temperature fields and the distribution of the porosity in the mushy layer are investigated numerically. When the superheat is large, the thickness of the mushy layer is relatively small compared to the thickness of the thermal boundary layer. With decreasing the superheat the critical Rayleigh number based on the thickness of the mushy layer increases and the mushy layer becomes stable to the compositional convection. The critical Rayleigh number obtained from the continuity conditions of temperature and heat flux at the mush-liquid interface is smaller than that from the isothermal condition at the upper boundary of the mushy layer.
염화암모늄 수용액 응고시에 Mush 층에서 성분적 대류의 선형안정성
황인국 ( In Gook Hwang ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.1
이성분 용융액의 시간의존형 응고계에서 mush 층의 대류발생을 선형 안정성 이론으로 해석하였다. 본 연구에서는 근공융물 mush 층을 다공성 블록으로 가정한 단순화된 모델에 전파이론을 적용하여 대류발생 임계조건을 구하였다. 본 연구 모델에서는 기존의 실험결과 및 mush층 위의 액체층을 포함하여 고려한 이론적 연구의 결과보다 더 높은 임계 Rayleigh 수가 얻어졌다. mush 층의 윗 경계면에 일정압력(투과)조건을 적용하는 경우가 비투과조건에 비해 임계 Rayleigh 수를 더 작게 하며 염화암모늄 수용액의 응고실험결과와 더 근접한 것으로 조사되었다.
이재록(Jae-Rok Lee),황인국(In-Gook Hwang),배재흠(Jae-Heum Bae) 한국청정기술학회 2009 청정기술 Vol.15 No.1
적니(red mud)는 보오크싸이트로부터 수산화알루미늄/알루미나를 제조하는 Bayer 공정에서 부산물로 발생되는 폐기물이다. 본 연구에서는 적니로부터 철과 알루미늄을 염산으로 침출시켜 폐수처리용 응집제를 제조하였다. 적니응집제를 합성폐수에 투입한 후 조절된 pH가 증가함에 따라 종금속이온 제거율이 증가하였다. 적니응집제 제조 시에 적니의 양이 증가할수록 Fe의 침출효율은 낮아졌으나, 적니응집제의 pH는 적니의 양이 증가할수록 높아졌다. 적니응집제와 물을 혼합한 용액을 다시 적니와 반응시켜 Fe 및 Al의 농도가 더 증가되고, pH가 향상된 침출액을 얻었다. 이 침출액의 pH는 다른 응집제 FeC1₃와 Fe₂(SO₄)₃의 pH와 비슷한 값을 보였다. Red mud is generated as a waste byproduct during the production of aluminum hydroxide/alumina from bauxite ore in the Bayer process. In this study coagulants for wastewater treatment were prepared by leaching iron and aluminum from red mud with hydrochloric acid. The removal efficiency of heavy metal ions by the red mud coagulant increased with increasing the adjusted pH value of the synthetic wastewater. When the red mud coagulant was prepared, the leaching efficiency of Fe decreased with increasing the weight of red mud, while the pH value of the red mud coagulant increased. The solution of the red mud coagulant mixed with water was reacted again with red mud to produce the leached solution, which had higher concentrations of Fe and Al and a higher pH value than the red mud coagulant. Also, its pH value was comparable to that of other coagulants: FeCl₃ and Fe₂(SO₄)₃.