http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
화우(Yu-Hua),경해룡(Hai-Long Jing),임봉수(Bong-Su Lim) 대전대학교 환경문제연구소 2014 환경문제연구소 논문집 Vol.18 No.-
The purpose of this sudy is to get characteristics of water quality in separated sewer overflows. In dry weather the water quality of sewage in the outfall of the separated sewer was an average BOD of 2.7 mg/L, CODmn of 4.9 mg/L, TN of 3.8 mg/L, TP of 1.9 mg/L, and SS of 5.3 mg/L, Because the quality except for TP was less than the water quality standard of wastewater treatment plant (WTP), a prevention facility was needed to prevent the sewage inflow to interceptor. When the separated sewer overflows (SSO) were overflowed, the maximum pollutant load was be found to be about from 2.7 to 5.4 times as a BOD base, about from 3.2 to 4.6 times as a SS base higher than average load. There was a big difference according to rainfall intensity and rainfall continuous time. In case the quality of SSO was less than water quality standard or water quality in dry season, SSO was required to discharge to the stream not to inflow to WTP by operating the floodgate in the outfall with water quality data using sensors, such as turbidity sensor, etc. Because removal efficiency by an intercepter load was calculated as low as about 10~20% as a BOD base, removal efficiency could be increased by installing a separated wall within the sewer.
난분해성 COD를 함유한 산업폐수처리의 응집제 활용 방안
신동호(Dong-Hao Shen),화우(Yu Hua),임봉수(Bong-Su Lim) 대전대학교 환경문제연구소 2013 환경문제연구소 논문집 Vol.17 No.-
The purpose of this study is to get basic data for the application of coagulants for treating an industrial wastewater containing NBD COD. The NBD COD concentration of the target wastewater was calculated to be 61 mg/L, which was about 72% of the first stage treated water, and this shows that there must be advanced wastewater treatment process. When Alum(8%) was injected in raw the water, 150ppm was the best dosage and 41% CODmn removal efficiency was obtained. When Alum(8%) was injected in the discharge water, 150ppm was the best dosage, and 19% CODmn removal efficiency was obtained. When powdered activated carbon was injected, 40ppm was the best dosage, 26% CODmn removal efficiency was obtained. The method of injecting Alum(8%) in the discharge water was suitable, when the effluent exceeds the water quality standard by 20%, and the method of injecting the powdered activated carbon was suitable, when the effluent exceeds the water quality standard by 20~40%.