http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
열응력에 의한 DUPIC 핵연료봉의 구조안정성에 관한 연구
胡光日 水原大學校 1999 論文集 Vol.17 No.-
The purpose of this study was to verify that the design of fuel rod for DUPIC is satisfied the design requirement. In this analysis the thermal effect is the most severe condition for the safety. With the thermal effects it is the very complicated problem to be analyzed the structural safety in short hand. But, by the application of theoretical analysis, the design margin which was used in this problem was adopted in the conservative point of view So, in the future design of fuel rod, this study can be used for the verification of safe design.
胡光日 水原大學校 2001 論文集 Vol.19 No.-
For the development of fuel performance code, it is very important to verify the experimental data to be used in computer program. The purpose of this study is the verification and qualification of these experimental data by FRAPCON-3.
박판의 특수한 형상에 대한 변형된 스프링백이론식의 제안
胡光日 水原大學校 1996 論文集 Vol.14 No.-
In case of the analysis for the thin plate, it is not applicable to use the spring-back theory which can be used for the thick beam or plate because it is not happened the plastic deformation with in the thin plate. So, for the forming of thin plate bending with flange, instead of the application of theory to the plate itself, it is reasonable to analyze the deformation phenomena from the plate without flange to the curved plate with flange. By comparing these theoretical results with the experimental data in the qualitative point of view, it is showed that this theory can be the one of realistic fundamental approaches.
胡光日 水原大學校 2005 論文集 Vol.23 No.-
It is the trend to use radioisotrope (RI) for the test machine of soil humidity density in other countries in Korea, more specified license requirements for the foundation of construction engineering companies were published in 1989. But because of some restrictions it is not customized and not have been used widely till recent. This paper shows the fundamental calculation methods for the manufacturing of test machines which uses the radioisotrope.
호광일 水原大學校 2012 論文集 Vol.26 No.-
레이저가공에 의한 겹치기용접부위의 피로파괴해석에 적용되는 응력분포를 이해하기 위한 이론적인 해석방법을 제시하였다. 용접부위만을 독립적으로 해석하기 위하여 자유물체도를 사용할때 오일러빔으로 가정한 형상변형을 기초로하여 경계조건을 산출하였으며 해석에 적용하는 2차원문제를 해석하기 위하여 수열함수를 사용하여 이에 적용되는 응력함수로 선택하고 이에 따른 계수값을 산출하도록 하였다. 경계조건의 도출에 중점을 두었으며 무차원함수로 표현하도록 하였다. 매우 특이한 불연속 응력분포가 발생하였다.
호광일 수원대학교 산업기술연구소 2003 산업기술연구소논문집 Vol.18 No.-
The purpose of this study was to introduce the J-integral for the calculation of the fracture mechanics approach with the consideration of the specialized η parameter. Although this approach is more complicated and sophisticated, with the simplification of this usage, we can find the one of the realistic calculation of the J-integral in the fracture mechanics field.
A Historical Background Study on the Isotropic Phenomenological Continuum Damage Approaches
胡光日 수원대학교 산업기술연구소 1997 산업기술연구소논문집 Vol.12 No.-
이 논문에서는 재료의 파손 시에 적용하는 크랙이나 내부기공과 같은 결함의 생성과 성장 및 진전에 관련하여 나타나는 현상에 대하여 적용되는 이론 중, 비례하중의 작용 시에 응용할 수 있는 등방성 연속체 대미지이론의 발전과 이의 전개에 대한 내용을 중점적으로 연구하였다. 추후에 적용되는 일반적인 경우에 발생하는 이방성 대미지이론의 전개에 근간을 이루는 가장 중요한 이론의 발전적인 전개이다.
방사성폐기물처분장 뒤채움재의 포화시간의 계산에 유한요소법의 적용방법
胡光日 水原大學校 1997 論文集 Vol.15 No.-
벤토나이트에 흡수되는 핵종에 의하여 뒷채움재가 일정량이상으로 포화되어 이에 의한 핵종의 외부로의 누출을 해석하는 이론이 고찰되었으며 이의 계산에 적용되는 관계식은 일반적으로 비선형 확산방정식으로 표현되기 때문에 재료의 응력 및 변형률해석에 적용되는 유한요소해석법을 변형하여 포화시간의 계산에 적용할 수 있도록 응용하여 프로그램을 개발하도록 시행하였고 간단한 적용예를 제시하여 계산값을 검토함으로써 프로그램의 적합성을 확인하였다.
응력과 변형률의 여러 조건에 따른 평판의 스프링백현상에 관한 연구
호광일 수원대학교 산업기술연구소 1995 산업기술연구소논문집 Vol.10 No.-
For the application of spring back phenomena, there are several restricted conditions. In idealized case, it is assumed that only plane strain or plane stress condition is existed. But in practical cases, other kind of conditions could be mixed, so it is the best application to derive the general plausible equation. In this work we derived the most generalized equation for the springback phenomena with consideration of almost conditions.
호광일 수원대학교 산업기술연구소 1994 산업기술연구소논문집 Vol.9 No.-
In this study the finite element method which calculate J-integral is developed for the nonlenear elastic plastic fracture mechanics. For the verification of the program, two general examples are introduced and the results are compared to existing data.