http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김광중(Gwang-jung Kim),최인철(Inchul Choi),최병철(Byungchul Choi) 한국자동차공학회 2014 한국자동차공학회 지부 학술대회 논문집 Vol.2014 No.5
Euro-6, Tier 4 Final 등의 국제 자동차배기가스 규제 중 NOx규제치인 0.4/kWh이하를 만족하기 위해서는 LNT와 SCR과 같은 후처리 장치가 필요하다. 하지만 보다 지속적으로 강화되는 규제를 만족시키기 위해서는 연소제어장치인 EGR의 적용이 필수불가결하다. EGR은 배기가스재순환을 의미하며, 배기가스 재순환량에 의해서 EGR율로 나타낼 수 있다. EGR율이 최적제어 되지 않으면, 배기가스 중 HC와 CO양이 오히려 증가하기 때문에 적정량의 배기가스를 재순환시켜야한다. 이때 EGR율은 흡/배기 시스템의CO₂농도로 계산 할 수 있다. 본 연구에서는 EGR율을 최적제어하기 위해서 실시간으로, 흡/배기시스템에서 CO₂의 농도를 계측하는 비 접촉식 센서를 설계하였고, 모사가스를 만들어 CO₂센서의 신뢰성과 반응속도, 정밀도를 검증하였다. CO₂의 농도에 따른 선형성은 원 데이터는 포화곡선은 보여서 함수를 적용하였다. 함수를 적용할 때 CO₂의 농도에 따라 신호변화는 선형적으로 변화하였으며, 5회 반복실험과 실시간 CO₂의 농도 변화에 따른 CO₂의 농도 출력으로 보아 신뢰성이 있다.
이주행(Ju-haeng Lee),최인철(Inchul Choi),최병철(Byungchul Choi) 한국연소학회 2015 KOSCOSYMPOSIUM논문집 Vol.2015 No.5
In this paper, we proposed a method to measure natural gas heating values using speed of sound. Main component for this method is using the signal from an ultrasonic transducer according to the changing of gas compositions. The proposed method was validated using opened configuration without gas chamber and closed one with gas chamber. Speed of sound was measured experimentally to evaluate its uncertainty and compared with calculated results from correlative methods to measure heating value.
횡방향으로 적층된 SiC 다공체내 연소특성 및 NF₃ 분해에 대한 실험적 연구
이주행(Ju-Haeng Lee),최병철(Byungchul Choi),최인철(Inchul Choi) 한국연소학회 2018 한국연소학회지 Vol.23 No.2
Experimental study has been carried out to investigate combustion and emission characteristics in horizontally stacked SiC porous media with various pore structures and equivalence ratio conditions. Based on preliminary results from flame visualization and stabilization experiments with SiC porous media, porous-media burner was fabricated for processing NF₃ thermally. The porous-media burner is composed of two layer structures: alumina ball layer and SiC porous media layer which initiates excess enthalpy combustion. To describe the degree of flame stability, we defined three regimes such as porous combustion, surface combustion, and blow-off. For the equivalence ratio of 0.7, NOx and CO were emitted at 4.6 ppm and 0.9 ppm respectively in normal state operation. However, in process state operation, NOx and CO increased up to 160.8 ppm and 348.1 ppm respectively for the equivalence ratio of 0.52 due to NOx formation from NH₃ decomposition process and the quenching reaction caused by partial N₂ flowing into the porous media.