http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Plug Flow Reactor 모델을 이용한 폐플라스틱의 열분해 특성 해석
최상규(Sangkyu Choi),최연석(Yeonseok Choi),정연우(Yeonwoo Jeong),한소영(Soyoung Han),응웬 반 꾸잉(Quynh Van Nguyen) 한국신재생에너지학회 2022 신재생에너지 Vol.18 No.4
The pyrolysis characteristics of high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP) were analyzed numerically using a 1D plug flow reactor (PFR) model. A lumped kinetic model was selected to simplify the pyrolysis products as wax, oil, and gas. The simulation was performed in the 400-600°C range, and the plastic pyrolysis and product generation characteristics with respect to time were compared at various temperatures. It was found that plastic pyrolysis accelerates rapidly as the temperature rises. The amounts of the pyrolysis products wax and oil increase and then decrease with time, whereas theamount of gas produced increases continuously. In LDPE pyrolysis, the pyrolysis time was longer than that observed for other plastics at a specified temperature, and the amount of wax generated was the greatest. The maximum mass fraction of oil was obtained in the order of HDPE, PP, and LDPE at a specified temperature, and it decreased with temperature. Although the 1D model adopted in this study has a limitation in that it does not include material transport and heat transfer phenomena, the qualitative results presented herein could provide base data regarding various types of plastic pyrolysis to predict the product characteristics. These results can in turn be used when designing pyrolysis reactors.
커피찌꺼기 급속열분해를 위한 50톤/일 규모 실증플랜트의 열 및 물질수지 산정
최상규(Sangkyu Choi),최연석(Yeonseok Choi),정연우(Yeonwoo Jeong),한소영(Soyoung Han),응웬 반 꾸잉(Quynh van Nguyen) 한국신재생에너지학회 2021 한국신재생에너지학회 학술대회논문집 Vol.2021 No.7
국내 커피 소비량은 지속적으로 증가하는 추세이며, 이에 따라 커피찌꺼기 생성량도 증가하고 있다. 커피찌꺼기는 커피를 내린 후 발생하는 폐기물로, 그 활용 방인으로 펠렛 또는 퇴비화하여 사용하는 방법이 제안되었으나 그 성분의 특성상 펠릿 성형이 어렵고 퇴비로서의 가치가 크지 않기 때문에 대부분 매립 또는 소각하는 방식으로 처리되고 있다. 커피찌꺼기는 일반 생활폐기물과 비교하였을 때 건조기준으로 발열량이 매우 높기 때문에 연료로서의 가치가 충분하며 특히 파우더 형태로 배출되기 때문에 파쇄 및 분쇄 등의 전처리가 필요하지 않은 장점이 있다. 급속열분해는 바이오매스 등의 폐기물을 약 500℃의 무산소 분위기에서 열분해하고, 생성된 열분해가스를 응축하여 액체상의 오일로 전환하는 기술로서, 고체상의 바이오매스를 액상으로 변환할 경우 연료로서의 활용이 용이해지고, 고부가 화학물질 원료로도 활용 가능하므로 효과적인 폐기물 자원화 방안이 될 수 있다. 특히 커피찌꺼기의 급속열분해를 통하여 생성된 바이오원유의 발열량은 약 6,000 kcal/kg으로, 목질계 바이오매스로부터 생성된 바이오원유의 일반적인 발열량인 약 4,000 kcal/kg에 비하여 매우 높아 급속열분해 원료로서 우수한 특징을 가지고 있다. 한국기계연구원에서는 독자적인 방식의 경사슬라이드식 급속열분해 반응기를 개발하여 왔으며, 20 kg/hr 규모의 파일럿 플랜트를 기반으로 하여 200 kg/hr 규모의 실증 플랜트를 개발하였다. 본 연구에서는 현재 보유한 플랜트의 10배 규모인 50톤/일 규모의 실증플랜트 개발을 위한 물질 및 에너지수지를 산정하였고, 그 결과를 플랜트 설계의 기초자료로 활용할 예정이다.