http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주완돈(Wandon Joo),이보성(Bo-sung Lee),이관중(Kwanjung Yee),이동호(Dong-Ho Lee) 한국항공우주학회 2005 韓國航空宇宙學會誌 Vol.33 No.1
본 연구에서는 진동 운동하는 익형의 동적실속 특성을 향상시키기 위하여, 고정 앞전 Droop과 Gurney 플랩의 크기와 위치에 대한 최적설계를 수행하였다. 고정 앞전 Droop이 모멘트 특성의 개선에 효율적이나 양력특성의 저하를 유발 할 수 있다. 반면에 Gurney 플랩은 양력특성의 향상을 가져오지만, 모멘트특성을 악화시키는 특성이 있다. 고정앞전 Droop의 설계변수는 상호 보완적인 특성을 갖는 위치와 각도를 설정하였으며, Gurney 플랩은 그 길이를 설계변수로 설정하였다. 또한, 동적실속과 같이 비선형성이 강한 문제의 설계를 위해서 고차 다항식의 반응면 기법과 민감도 기반의 최적설계 기법을 사용하였다. 최적화는 양력과 모멘트 특성이 동시에 개선되도록 수행 하였다. 설계 결과 동적실속의 양력, 모멘트 및 항력특성의 향상을 가져올 수 있었으며, 가변 앞전 Droop과 Gurney 플랩을 결합한 능동제어장치에 버금가는 동적실속 제어 효과를 갖을 수 있음을 확인하였다. In order to improve dynamic stall characteristics of an oscillating airfoil, optimal design has been performed for fixed nose droop and Gurney flap. Fixed nose droop is known to be very effective to improve pitching moment characteristics but may cause degeneration of aerodynamic lift at the same time. On the other hand, Gurney flap has the opposite characteristics. For fixed nose droop, location and angle are chosen as design variables, while length is defined as design variable for Gurney flap. Higher order response surface methodology and sensitivity based optimal design method are employed to handle highly nonlinear problem such as dynamic stall. Optimal design has been performed so that lift and pitching moment are simultaneously improved. The design results show that aerodynamic characteristics can be remarkably improved through present design approach and the present passive control method is as good as active control method which combines variable nose droop and Gurney flap.
주완돈(Wandon Joo),이기학(Ki-Hak Lee),이관중(Kwanjung Yee),이동호(Dong-Ho Lee) 한국항공우주학회 2006 韓國航空宇宙學會誌 Vol.34 No.1
본 연구에서는 완전 내재적 기법을 이용한 2계 자유도 모델에 대한 플러터 해석을 수행하였다. 유동해석을 위하여 2차원 Navier-Stokes 지배방정식을 ε-SST 난류모델과 DP-SGS 병렬화 기법을 이용해 구성하였다. 구조해석을 위하여 피치와 플런지의 2계 자유도를 갖는 모델을 구성하였으며 시간영역에서의 해석을 위하여 유동해석과 마찬가지로 이중 시간 전진 기법을 이용하였다. 가상 시간 전진에서 유체-구조 결합을 통해서 강성결합을 구현하였으며 이를 천음속 플러터 예측에 적용하였다. 플러터 해석의 전형적인 응답인 감쇠응답, 중립응답, 발산응답 및 limit cycle oscillation (LCO) 등을 계산하였으며, 더불어 플러터 속도 경계곡선을 작성하였다. 천음속 플러터 해석은 난류모델 뿐만 아니라 유체-구조 결합 방법에 따라 다른 특성을 보임을 확인하였다. In the present study, a strongly coupled analysis code is developed for transonic flutter analysis. For aerodynamic analysis, two dimensional Reynolds-Averaged Navier-Stokes equation was used for governing equation, and ε-SST for turbulence model, DP-SGS(Data Parallel Symmetric Gauss Seidel) Algorithm for parallelization algorithm. 2 degree-of-freedom pitch and plunge model was used for structural analysis. To obtain flutter response in the time domain, dual time stepping method was applied to both flow and structure solver. Strongly coupled method was implemented by successive iteration of fluid-structure interaction in pseudo time step. Computed results show flutter speed boundaries and limit cycle oscillation phenomena in addition to typical flutter responses - damped, divergent and neutral responses. It is also found that the accuracy of transonic flutter analysis is strongly dependent on the methodology of fluid-structure interaction as well as on the choice of turbulence model.
Design of Substructure for 3MW Offshore Wind Turbine Demonstrator Project
변철진(Byun, Chuljin),주완돈(Joo, Wandon),정석용(Jeong, Seokyong),박종포(Park, Jongpo) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
The 3MW OWEC demonstrator project in Korea will be the first offshore wind project with Korean turbine, Doosan WinDS3000, and constructed on the north-eastern sea of Jeju Island as the water depth of 15m. Integrated loadings of wind and wave are investigated to describe a design loads for both extreme and fatigue conditions using GH-Bladed. A dynamic behaviour of substructure strongly affects a substructure loadings. The jacket structure is designed in accordance with DNV guidelines. The results of this paper show overall design process of offshore substructure as a complex jacket concept and this design process can be implemented on a design of monopile and tripod structures.
앞전 Droop과 Gurney 플랩을 이용한 동적 실속 제어
이보성(Bo-sung Lee),이관중(Kwanjung Lee),주완돈(Wandon Joo),이동호(Dong-Ho Lee) 한국항공우주학회 2004 韓國航空宇宙學會誌 Vol.32 No.5
본 연구에서는 헬리콥터의 전진비행성능 향상에 필수적인 로터블레이드의 동적실속성능을 향상시키기 위한 수동제어기법에 대한 연구를 수행하였다. 로터블레이드의 동적실속성능을 향상시키기 위해서는 블레이드 익형에 발생하는 유동박리에 대한 제어를 통해 양력 특성과 피칭모멘트 특성을 동시에 향상시켜야만 한다. 본 연구에서는 실제구현이 용이한 고정 앞전Droop과 Gurney 플랩을 심한 동적실속영역에 대해 동시에 적용하여 기존의 동적실속 제어기법에 비해서 탁월한 양력성능 향상 및 피칭 모멘트 성능 향상을 얻을 수 있음을 확인하였다. To achieve the advanced forward flight performance of helicopter, the passive control methods for enhancement of the dynamic stall characteristics of rotor blades are studied. To enhance the dynamic stall characteristics of the rotor blades, it is essential to improve the lift performance and the pitching moment performance simultaneously with the control of the separation on the rotor blades. For this point of view, both the fixed droop leading edge and the Gurney flap which are simply realized are used for control of the dynamic stall in severe dynamic stall conditions. From this study, the combination of both passive control methods showed dramatic enhancement of lift and pitching moment performance in dynamic stall than previous research results.