http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조수용,김수용,Cho, Soo-Yong,Kim, Soo-Yong 한국유체기계학회 2001 한국유체기계학회 논문집 Vol.4 No.4
Performance analysis is conducted on an axial-type turbine which is used for fire extinction by injecting water or steam into the turbine. Loss models developed by Hacker and Okapuu are applied for predicting the performance of turbine. Pressure loss generated through a turbine is converted to the thermal efficiency, and thermal and gas properties are calculated within a turbine passage. Total-to-total efficiency, total-to-static efficiency, static temperature at the exit of turbine, output power, flow coefficient, blade loading coefficient, and expansion ratio are predicted with changing the amount of injected steam and the rotational speed. The 74 kW class gas turbine developed at KIMM is chosen for performance analysis. The 74 kW class turbine consists of 1 stage like a current developing gas turbine for fire extinction. Water or steam is injected at the end of combustor, and results show that efficiency and output power are dependent on the temperature of injected water or steam and the static temperature at the exit is decreased.
축류형 터빈 익형의 역설계에 의한 최소 형상변수에 관한 연구
조수용,오군섭,윤의수,최범석,Cho, Soo-Yong,Oh, Koon-Sup,Yoon, Eui-Soo,Choi, Bum-Seog 한국유체기계학회 2000 한국유체기계학회 논문집 Vol.3 No.4
Several reverse design methods are developed and applied to the suction or pressure surface for finding design values of blade geometry for a given axial turbine blade. Re-designed blade profiles using shape parameters are compared with measured blade data. Essential shape parameters for blade design are induced by the procedure of reverse design for best fitting. Characteristics of shape parameters are evaluated through the system design method and restriction conditions of structural stability or aerodynamic flow loss. Some of shape parameters i.e blade radius or exit blade angle etc., are classified to weakly adjustable shape parameters, otherwise strongly adjustable shape parameters which would be applied for controlling blade shape. Average deviation values between the measured data and re-designed blade using shape parameters are calculated for each design method. Comparing with the average deviation for a given blade geometry, minimum shape parameters required to design a blade geometry are obtained.
축류형 터빈 익형의 역설계 및 형상설계를 위한 설계변수에 관한 연구
조수용,오군섭,최범석,Cho, Soo-Yong,Oh, Koon-Sup,Choi, Bum-Seog 한국유체기계학회 2000 한국유체기계학회 논문집 Vol.3 No.2
For a given axial turbine blade, reverse design method is developed to improve blade efficiency, optimize blade profile, or repair parts etc. In this process, design parameters for designing axial turbine blade are induced. The induced design parameters are as follows; ellipse at leading edge, radios of trailing edge, axial chord, tangential chord, wedge angle at the inlet, and unguided turning angle. Suction and pressure surfaces of turbine blade are described by cubic polynomials. Two sample blades we chosen and their blade profiles are measured at the mean radius. Values of design parameters for sample blades are obtained by the reverse design method. Re-designed blade profiles using calculated design parameters are compared with the measured data, and they show good agreement. So, the developed design method could be applied to design general turbine blades. Various blade shapes are designed, and they show that designed blade profiles can be adjusted by controlling design parameters.
축류송풍기의 설계시 적용된 와류형식의 영향에 관한 실험적 연구
조수용,최범석,오종학,Cho, Soo-Yong,Choi, Bum-Seog,Oh, Jong-Hak 한국유체기계학회 1999 한국유체기계학회 논문집 Vol.2 No.3
The flow angle at the inlet and exit of a rotor or stator is an important design parameter involved in the design a fan blade. Flow angles along the radial direction for 3-D stacking are calculated using two kinds of vortex methods, i.e. free vortex method and forced vortex method. The performance test shows that a fan designed by the free vortex method is more efficient than a fan designed by the forced vortex method. As a reference, an imported fan is tested. Even though the straightner of the imported fan is used for the comparison test, the difference of efficiency between the imported fan and the fan designed by the free vortex method is negligible. The noise of the fan designed by the free vortex method is less than that of the imported fan. A bellmouth installed at the fan inlet improved the fan efficiency more than $10\%$.
수직축 풍력터빈 성능향상을 위한 풍력타워 최적설계에 관한 연구
조수용(Soo-Yong Cho),임채환(Chae Hwan Rim),조종현(Chong-Hyun Cho) 한국항공우주학회 2019 韓國航空宇宙學會誌 Vol.47 No.3
풍력 타워는 수직형 풍력터빈의 성능을 향상시키기 위해 사용되어왔다. 하지만 올바르게 설계되지 않은 풍력 타워는 오히려 풍력터빈의 성능을 저하시킬 수 있다. 따라서 본 연구에서는 풍력 타워의 최적화 연구를 수행하였다. 이를 위하여 다음과 같이 6가지의 설계변수가 선택되었다. 즉, 가이드 벽의 외부 및 내부 반경, 스플리터의 적용 여부, 스플리터의 내부 반경, 가이드 벽의 개수 및 원주각도가 선정되었다. 최적화를 위한 목적함수는 풍력타워 내에 설치된 수직형 풍력터빈에서의 주기적인 평균 토크가 사용되었으며, 최적화 과정에서 지엽적인 최적화 결과를 피하기 위하여 실험계획법, 유전자알고리즘 및 인공신경망기법이 사용되었다. 인공신경망은 세대의 증가에 따라 지속적으로 향상하였으며, 수직 풍력터빈의 성능은 독립운전에 비하여 최적화된 풍력 타워 내에서 두 배 이상 향상되었다. Wind power tower has been used to augment the performance of VAWT (Vertical Axis Wind Turbine). However, inappropriately designed wind power tower could reduce the performance of VAWT. Hence, an optimization study was conducted on a wind power tower. Six design variables were selected, such as the outer radius and the inner radius of the guide wall, the adoption of the splitter, the inner radius of the splitter, the number of the guide wall and the circumferential angle. For the objective function, the periodic averaged torque obtained at the VAWT was selected. In the optimization, Design of Experiment (DOE), Genetic Algorithm (GA), and Artificial Neural Network (ANN) have been applied in order to avoid a localized optimized result. The ANN has been continuously improved after finishing the optimization process at each generation. The performance of the VAWT was improved more than twice when it operated within the optimized wind power tower compared to that obtained at a standalone.