http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
커먼레일 연료분사 시스템을 장착한 2.9 리터급 경량 DME 트럭의 연구 및 개발
정수진(Soo-Jin Jeong),오세두(Se-Doo Oh),이호길(Ho-Kil Lee),박정권(Jung-Kwon Park),이기수(Gee-Soo Lee),표영덕(Young-Dug Pyo),임옥택(Ock-Taek Lim) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
In this study, the trucks(2.9-liter) have been developed to use DME as fuel, and performance test of the vehicle"s DME engine, power, emissions, fuel economy and vehicle aspects was conducted. For experiments, the fuel system(common-rail injectors and high-pressure pump included) and the engine control logic was developed, and ECU mapping was performed. In this way, put the diesel fuel in the DME engine, and injection quantity at the injectors were measured. As a result, the rail pressure from 40 ㎫ to approximately 65% increase compared to the base injector has been confirmed that. Also, the Inlet IMV of DME high-pressure fuel pump opens under normal conditions, the performance of prototype was evaluated. As a result, the pump discharge flow is 15.5 ㎏/h when the fuel rail pressure is 400rpm(40 ㎫), and the pump discharge flow is 92.1 ㎏/h when the fuel rail pressure is 2,000rpm(40 ㎫). The maximum value of full-load torque capability is 25.5 ㎏fm(based on 2,000 rpm), and more than 90% compared to the level of the diesel engine were obtained. The DME vehicle was developed in this study, 110 ㎞/h can drive to the stable, and calculated in accordance with the carbon-balance method of fuel consumptions is 5.7 ㎞/L.