세라믹/금속 접합공정기술의 연구동향

이형근,Lee, Hyeong-Geun 재료연구소 1997 機械와 材料 Vol.9 No.1

저출력 펄스형 Nd:YAG 레이저를 사용한 클래딩에서 클래딩 변수들이 용착효율에 미치는 영향 분석 및 최적화

이형근,Lee, Hyoung-Keun 대한용접접합학회 2007 대한용접·접합학회지 Vol.25 No.4

The optimization of the cladding parameters was studied to maximize the deposition efficiency in the laser cladding using a low power pulsed Nd:YAG laser. STS304 stainless steel plate and Co alloy powder were used as a substrate and powder for cladding, respectively. The six cladding parameters were selected through preliminary experiments and their effects on the deposition efficiency were analyzed statistically. Experiments were designed and carried out using the Taguchi experimental method using a L18 orthogonal array. It was found from the results of analysis of variance(ANOVA) that the powder feed position and powder feed angle had the most significant effects on the deposition efficiency, but the powder feed rate and laser focal position had nearly no effects. The deposition efficiency could be maximized at 0mm of the powder feed position and 50o of the powder feed angle in the experimental range. From this experimental analysis, a new laser cladding head with 20o of the powder feed angle was designed and manufactured. With a new laser cladding head, the highest deposition efficiency of 12.2% could be obtained.

차분 위성 항법을 위한 위치영역 필터의 설계

이형근,지규인,Lee, Hyung Keun,Jee, Gyu-In,Rizos, Chris 한국항행학회 2004 韓國航行學會論文誌 Vol.8 No.1

차분 위성 항법에 있어서 빈번한 동적 변화를 수반하는 항체에 대하여 편향되지 않은 위치 추정치를 생성하기 위해서는 위상 평활화 코드 필터가 널리 사용되고 있다. 위치추정, 오차해석, 고장진단, 그리고 미지정수 결정 등 보정위성항법시스템의 다양한 응용분야에 있어서 정확한 오차공분산 정보는 중요한 역할을 담당한다. 반면, 기존의 위상 평활화 코드 필터 알고리즘들은 대부분 누적위상 측정오차에 의한 시전달 오차를 무시하므로 실재에 비하여 낙관적인 오차공분산 정보를 생성할 위험성을 내포하고 있다. 위상 평활화 코드 기법의 활용에 있어서 일관성 있고 적절한 오차공분산 정보를 생성하기 위하여 본 논문에서는 Stepwise Optimal Position Projection Filter와 Stepwise Unbiased Position Projection Filter 알고리즘을 제안하였다. 제안된 필터는 기존의 필터에 비하여 누적위상의 특성에 기인하는 시전달 오차의 특성을 정확하고 상세하게 고려하여 주며 잦은 가시위성의 변화도 함께 고려할 수 있는 장점을 가진다. 몬테카를로 시뮬레이션에 의하여 수신기 Kalman 필터, 기존의 위상 평활화 코드 필터, 그리고 제안된 두 필터들의 성능을 비교 분석 하였다. Consistent and realistic error covariance information is important for position estimation, error analysis, fault detection, and integer ambiguity resolution for differential GNSS. In designing a position domain carrier-smoothed-code filter where incremental carrier phases are used for time-propagation, formulation of consistent error covariance information is not easy due to being bounded and temporal correlation of propagation noises. To provide consistent and correct error covariance information, this paper proposes two recursive filter algorithms based on carrier-smoothed-code techniques: (a) the stepwise optimal position projection filter and (b) the stepwise unbiased position projection filter. A Monte-Carlo simulation result shows that the proposed filter algorithms actually generate consistent error covariance information and the neglection of carrier phase noise induces optimistic error covariance information. It is also shown that the stepwise unbiased position projection filter is attractive since its performance is good and its computational burden is moderate.

회전벡터와 좌표전환

이형근,Lee, Hyeong-Geun 제어로봇시스템학회 2011 제어로봇시스템학회지 Vol.17 No.3

유색 잡음 환경하에서 Cumulant를 이용한 한국어 단모음 인식

이형근,양원영,조용수,Lee, Hyung-Gun,Yang, Won-Young,Cho, Yong-Soo 한국음향학회 1994 韓國音響學會誌 Vol.13 No.2

본 논문에서는 3차 Cumulant를 이용하여 음성의 특징벡타를 추출하고, 이것을 신경회로망의 입력으로 사용하는 음성 인식 방법을 제시한다. 3차 이상의 고차 cumulant를 이용하면 Gaussian 잡음과 음성 신호의 분리가 가능하며, 충분히 많은 데이타를 사용할 경우 음성 데이타를 AR 모델링한 계수값을 bias 없이 추출할 수 있다. 또한 기존의 2차 statistics를 이용한 특징 벡타 추출 방법과 비교할 때 잡음이 큰 경우에도 분산은 크지만 bias가 작아 보다 잡음에 강한 특징벡타를 추출할 수 있다. 한국어 단모음에 대한 모의실험을 통하여 유색 잡음 환경에서 SNR이 커질수록 3차 cumulant를 이용한 방법이 기존의 2차 statistics를 이용한 방법보다 높은 인식율을 나타냄을 보인다. This paper presents a speech recognition method utilizing third-order cumulants as a feature vector and a neural network for recognition. The use of higher-order cumulants provides desirable uncoupling between the gaussian noise and speech, which enables us to estimate the coefficients of AR model without bias. Unlike the conventional method using second-order statistics, the proposed one exhibits low bias even in SNR as low as 0 dB at the expense of higher variance. It is confirmed through computer simulation that recognition rate of korean single-vowels with the cumulant-based method is much higher than the results with the conventional method even in low SNR.

F-RPN(Failure-RPN)을 이용한 장비 고장률 개선 연구: 반도체 식각 공정을 중심으로

이형근,홍용민,강성우,Lee, Hyung-Geun,Hong, Yong-Min,Kang, Sung-Woo 대한안전경영과학회 2021 대한안전경영과학회지 Vol.23 No.3

The purpose of this study is to present a novel indicator for analyzing machine failure based on its idle time and productivity. Existing machine repair plan was limited to machine experts from its manufacturing industries. This study evaluates the repair status of machines and extracts machines that need improvement. In this study, F-RPN was calculated using the etching process data provided by the 2018 PHM Data Challenge. Each S(S: Severity), O(O: Occurence), D(D: Detection) is divided into the idle time of the machine, the number of fault data, and the failure rate, respectively. The repair status of machine is quantified through the F-RPN calculated by multiplying S, O, and D. This study conducts a case study of machine in a semiconductor etching process. The process capability index has the disadvantage of not being able to divide the values outside the range. The performance of this index declines when the manufacturing process is under control, hereby introducing F-RPN to evaluate machine status that are difficult to distinguish by process capability index.

Al 1050 합금에 과공정 Al-Si 합금의 레이저 클래딩에서 평균출력의 영향에 대한 연구

이형근,Lee, Hyoung-Keun 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.2

This study produced hypereutectic Al-Si clad layer on 1050 Al alloy by a novel laser cladding method. Pure Si powder was mixed with organic binder to make fluid paste which could be screen-printed on the 1050 Al alloy plate. Pulsed Nd:YAG laser was irradiated on the Si paste layer to melt and alloy with Al substrate. Different laser power of 99 W, 179 W and 261 W, was used to see the difference of the microstructure, composition and hardness of the clad layers. When laser power of 179 W was used, the clad layer had overall Si content of 38wt% and composed of fine primary Si particles and fine eutectic phase. At laser power of 261 W, the clad layer had overall Si content of 24wt% and composed of mainly fine eutectic phase. Vickers hardness of HV176.7 and HV150.3 on the clad layer was obtained at laser power of 179 W and 261 W, respectively.

STS304L 캡슐의 펄스형 GTA 용접에서 용접변수들이 용접부 형상에 미치는 영향

이형근,한현수,손광재,Lee, Hyoung-Keun,Han, Hyon-Soo,Son, Kwang-Jae 대한용접접합학회 2007 대한용접·접합학회지 Vol.25 No.5

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

SO2 와 NOx 동시제거를 위한 흡수제의 반응성

이형근,최원길,조항대,민병무 ( Hyung Keun Lee,Won Kil Choi,Hang Dae Jo,Byung Moo Min ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.1

최근 휴대폰용 배터리의 기술개발 동향

이형근,김영준,조원일,Lee, H.G.,Kim, Y.J.,Cho, W.I. 한국전기화학회 2007 한국전기화학회지 Vol.10 No.1

이 리뷰를 통하여, 휴대폰용 리튬이차전지의 최근 기술동향을 설명하였다. 휴대폰용 이차전지로는 니카드, 니켈-금속수소, 리튬이온 혹은 리튬이온폴리머의 세 가지 형태의 전지가 있으며, 리튬 이차전지가 에너지밀도 측면에서 가장 성능이 우수하다. 즉, 동일한 용량을 갖는 이차전지 가운데 가장 작고 가벼운 것은 리튬이차전지이다. 이러한 리튬이차전지의 시장은 매년 약 15%의 높은 성장을 기록하고 있다. 연구개발은 $LiFePO_4$를 포함하는 새로운 양극, $Li_4Ti_5O_{10}$, Si, 주석 등의 새로운 음극소재, 새로운 전해질과 안정성 확보에 관한 것을 중심으로 진행되고 있다. In this review article, we are going to explain the recent development of lithium secondary batteries for a cellular phone. There are three kinds of rechargeable batteries for cellular phones such as nickel-cadmium, nickel-metal hydride, and lithium ion or lithium ion polymer. The lithium secondary battery is one of the most excellent battery in the point of view of energy density. It means very small and light one among same capacity batteries is the lithium secondary battery. The market volume of lithium secondary batteries increases steeply about 15% annually. The trend of R&D is focused on novel cathode materials including $LiFePO_4$, novel anode materials such as lithium titanate, silicon, and tin, elecrolytes, and safety insurance.