RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • SCOPUSKCI등재

        납사분해공정 잔사유로부터 등방성/이방성 핏치의 제조

        이보성,유승곤,김명수,황종식,이청희,조규호,김철중 한국화학공학회 1995 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.33 No.5

        납사분해공정(NCC) 잔사유인 PFO 내에 잔존하는 경질의 휘발성유분을 제거하기 위하여 일차로 질소 분위기, 300℃에서 2시간 동안 열처리 과정을 수행하였다. 원료 PFO로부터 경질유분이 제거된 비휘발성의 전구체 핏치를 350℃에서 450℃의 온도 범위에서 3시간 동안 500㏄/min의 질소 분위기로 2차 열처리 과정을 거쳐 건류하였다. 370℃의 건류 온도에서 연화점 255℃, 톨루엔 불용분 28wt%의 방사 가능한 등방성 핏치를 얻었으며 이를 모세관 형태의 0.5㎜ 방사 구멍을 통해 방사한후 산화 및 탄화과정을 거쳐 25 ㎛ 굵기의 등방성 탄소 섬유를 얻을 수 있었다. 390℃에서 건류된 핏치로부터 메조페이스 형태의 소구체가 관찰되기 시작하였으며 430℃와 450℃에서 건류된 이방성 핏치로부터는 비교적 잘 발달된 흐름 섬유상 구조의 메조페이스가 전체적으로 관찰되었다. PFO(pyrolized fuel oil), which is the bottom oil from a NCC(naphtha cracking center), was initially heat-treated at 300℃ for 2 hr under N₂ blowing to remove the volatile matters from the original constituents of the feedstock. The nonvolatile precursor-pitch derived from the PFO raw material was thermally pyrolized in the temperature ranges from 350℃ to 450℃ for 3 hr during the second thermal stage under 500㏄/min N₂ blowing. Spinnable isotropic pitch with the softening point of 255℃ and the toluene insolubles of 28 wt% was obtained at 370℃, and then was successfully spun through a 0.5 ㎜ capillary sized-spinneret. After spinning, an isotropic carbon fiber of 25 ㎛ diameter was obtained via oxidation and carbonization procedures. Mesophase spherules began to be observed from the second-stage product pitch pyrolized at 410℃, and bulk mesophase with a flow texture was observed at 430℃ and 450℃.

      • SCOPUSKCI등재

        초임계 톨루엔을 이용한 핏치의 분획시 퀴놀린 첨가제의 영향

        이보성,유승곤,황종식,김철중 한국화학공학회 1995 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.33 No.4

        초임계 톨루엔을 이용한 핏치의 분획시 공용매인 퀴놀린의 첨가량, 온도, 압력이 미치는 영향에 관하여 연구하였다. 퀴놀린의 첨가량은 0, 3, 7, 10%로 변화시켰고, 온도는 325, 345, 365℃로 하였으며, 압력은 27, 47, 67.2 bar로 정하였다. 공용매인 퀴놀린의 첨가는 용해도 증가와 추출 성분의 선택성 변화를 가져왔고, 추출 잔여 핏치를 유동성이 큰 메조페이스로 전환하는데 효과적이었다. 이는 고성능 핏치계 탄소섬유용 전구체 핏치로 사용될 것으로 기대된다. Effects of quinoline entrainer content, extraction temperature and pressure in fractionation of pitch with supercritical toluene is investigated. Quinoline contents 0, 3, 7, 10%, temperatures 325, 345, 365℃ and pressures 27, 47, 67.2 bar were selected as experimental conditions. The addition of quinoline made the solubility of pitch increase and made changes on extraction selectivity. Furthermore, it was effective on the formation of fusible mesophase pitch. So, it is anticipated that the mesophase pitch could be used as the precursor for the formation of a high-performance pitch-based carbon fiber.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼