http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고분자연료전지에 사용되는 e-PTFE 지지체의 펜톤반응 후 화학적 열화
오소형 ( Sohyeong Oh ),임대현 ( Daehyun Lim ),이무석 ( Mooseok Lee ),이동훈 ( Donghoon Lee ),박권필 ( Kwonpil Park ) 한국화학공학회 2020 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.58 No.4
고분자연료전지(PEMFC) 고분자막의 지지체는 기계적 내구성 향상에 핵심적인 역할을 한다. 지지체로 사용하는 e-PTFE는 화학적으로 안정하여 PEMFC 구동과정에서 전기화학적인 열화에 대해서는 거의 연구되지 않았다. 본 연구에서는 e-PTFE가 Fenton 반응과정에서 발생한 라디칼과 과산화수소에 화학적으로 안정한지 검토하였다. Fenton 반응 과정에서 e-PTFE의 주사슬이 끊어져 지지체의 화학적 구조와 형태 변화가 발생하였고, 그에 따라 인장 강도가 감소하였다. 실제 PEMFC 구동과정에서 고분자막 이오노머의 전기화학적 열화는 라디칼과 과산화수소에 의해서 고분자막 내부에서 발생하므로, e-PTFE 지지체의 셀 내에서 전기화학적 열화도 발생할 수 있음을 본 연구 결과가 보였다. The support of the PEMFC membrane plays a key role in improving mechanical durability. The e-PTFE used as a support is chemically stable, so electro-chemical degradation in the PEMFC driving process has been rarely studied. In this study, we investigated whether e-PTFE is chemically stable to radicals and hydrogen peroxide during Fenton reaction. After the Fenton reaction, the main chain of e-PTFE broke, resulting in a change in the chemical structure and morphology of the support, resulting in a decrease in tensile strength. The results of this study showed that electrochemical degradation of the membrane ionomer in the PEMFC process occurs inside the membrane by radicals and hydrogen peroxide, so that electrochemical degradation may also occur at the e-PTFE support in the cell.
고분자전해질연료전지에서 선형주사전압전류측정법(LSV)의 분석방법에 따른 수소투과전류밀도 비교
오소형 ( Sohyeong Oh ),황병찬 ( Byungchan Hwang ),이무석 ( Mooseok Lee ),이동훈 ( Donghoon Lee ),박권필 ( Kwonpil Park ) 한국화학공학회 2018 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.56 No.2
고분자전해질 연료전지(PEMFC)의 고분자막 열화정도는 주로 수소투과전류밀도로 평가한다. 수소투과전류밀도는 선형주사전압전류측정법(Linear Sweep Voltammetry, LSV)으로 측정하는데 DOE프로토콜과 NEDO프로토콜이 분석방법에 차이가 있다. 본 연구에서는 PEMFC 구동 및 가속 열화 시험 과정에서 두 프로토콜을 적용해 수소투과 전류밀도를 비교하였다. DOE 방법에 의한 LSV 방법에서는 주사속도(scan rate) 변화가 수소투과 전류밀도에 영향을 주지만 NEDO 방법에서는 주사속도가 수소투과전류밀도에 영향을 주지 않았다. 고분자막 가습/건조 15,000사이클 평가과정에서 DOE 방법은 막의 열화를 민감하게 측정하였으나 NEDO방법은 DOE방법에 비해 막의 열화가 덜 민감하게 나타났다. Degree of membrane degradation in Proton Exchange Membrane Fuel Cells (PEMFC) is mainly evaluated by the hydrogen crossover current density. The hydrogen crossover current density is measured by linear sweep voltammetry (LSV), which differs from the DOE protocol and the NEDO protocol. In this study, two protocols were compared during PEMFC operation and accelerated stress test. In the LSV method by the DOE method, the scan rate change affects the hydrogen crossover current density, but the NEDO method does not affect the hydrogen crossover current density. In the course of 15,000 cycles of polymer membrane wet/dry cycle, the DOE method was sensitive to membrane degradation, but the NEDO method was less sensitive to membrane degradation than the DOE method.