RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        제어 가능한 전송 영점을 이용한 광대역 차단 특성을 갖는 저역 통과 필터

        이건천,김유선,김경근,이태성,나현식,임영석,Lee, Geon-Cheon,Kim, Yu-Seon,Kim, Kyung-Keun,Lee, Tae-Sung,Na, Hyeon-Sik,Lim, Yeong-Seog 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8

        본 논문에서는 전기 결합 구조와 추가된 개방 스터브를 이용해 제이 가능한 4개의 전송 영점을 갖는 저역 통과 필터를 설계 및 제작하였다. 필터의 통과 대역은 GSM 대역이며, 전기 결합에 의해 WiBro 및 위성 DMB 대역에서 전송 영점이 각각 발생한다. 또한, 임의의 상측 주파수에서 개방 스터브에 의해 추가적인 2개의 전송 영점이 발생하는 구조이다. 적은 기생 성분을 갖는 준집중 소자를 이용해 필터를 구현함으로써 차단 대역의 고조파 성분을 억제하였다. 유한 전송 영점의 제어를 위한 등가 회로의 전기 결합 성분인 $C_M$은 필터 구조의 개방 스터브 간 간격 조절을 통해 구현하였다. 유전율 2.6인 테프론 기판을 사용하여 제작된 필터의 전체 크기는 급전선로를 포함하여 $38{\times}20{\times}0.79mm^3$이다. 측정된 3dB 차단 주파수는 1.55GHz이며, 전송 영점의 위치는 각각 2.20, 2.43, 4.11 및 6.84 GHz이다. In this paper, design and fabrication of the LPF with controllable four transmission zeros using electric coupling and added open stub is presented. Pass-band of the LPF is GSM band, and two transmission zeros are generated by the electric coupling at the WiBro and S-DMB band, And the other two transmission zeros are generated by the open stub at the upper frequencies. Harmonic frequency of the stop-band is suppressed by the realization of the filter using quasi-lumped element with small parasitic values. $C_M$, which is the electric coupling element of the equivalent circuit, is realized by the distance control between the open stubs of the filter structure. The fabricated LPF used teflon substrate with relative permittivity of 2.6. And it has a size of $38{\times}20{\times}0.79 mm^3$, which is including a feed line. The measured 3 dB cut-off frequency is 1.55 GHz, and locations of the transmission zeros are 2.20, 2.43, 4.11 and 6.84 GHz, respectively.

      • KCI등재

        유효 인덕턴스 효과와 적층 PCB를 이용한 하나의 전송 영점을 갖는 대역 통과 필터

        김유선,남훈,이건천,서인종,임영석,Kim, Yu-Seon,Nam, Hun,Lee, Geon-Cheon,Seo, In-Jong,Lim, Yeong-Seog 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.11

        In this paper, the circuit analysis of three-dimensional bandpass filter with transmission zero in multi-layer printed circuit board is presented. The equivalent circuit of bandpass filter is evaluated by microwave network analysis. Compare to the established paper that have configured the circuit model of filter except the effect of distribute element, the proposed model can include the effect. As a result, the multi-layer PCB bandpass filter with transmission zero has designed by extracting mutual capacitance from electrical component inside inductor. The structure size is only $10mm{\times}20mm{\times}1.251mm$. Measured data of the bandpass filter indicate 1.9 dB of insertion loss and 28 dB of return loss at the center frequency of 1.84 GHz, as well as 43 dB attenuation at the refraction frequency of 2.78 GHz. 본 논문에서는 적층 PCB에 전송 영점을 갖는 3차원의 대역 통과 필터의 회로 해석을 하였다. 대역 통과 필터의 등가 회로는 고주파 네트웍 해석에 의해 계산되어졌다. 기존의 논문들은 분포 정수 소자의 영향을 제외한 회로 모델을 구성하였지만, 제안된 모델은 이에 대한 영향을 포함한다. 그 결과 인덕터들의 내부 전기적 성분으로부터 상호 커패시턴스를 추출함으로써 하나의 전송 영점을 갖는 적층 PCB 대역 통과 필터를 설계하였다. 구조의 크기는 단지 $10mm{\times}20mm{\times}1.2mm$이다. 대역 통과 필터의 측정된 데이터는 중심 주파수인 1.84 GHz에서 1.9 dB의 삽입 손실과, 28 dB의 반사 손실을 가지며, 차단 주파수인 2.78 GHz에서 43 dB의 감쇠 특성을 보인다.

      • 기생 요소 효과들을 고려한 얇은 두께의 LTCC 저역 통과 필터 설계

        김유선 ( Yu Seon Kim ),남훈 ( Hun Nam ),이건천 ( Geon Cheon Lee ),임종식 ( Jong Sik Lim ),임영석 ( Yeong Seog Lim ) 전남대학교 전자통신기술연구소 2007 전자통신기술논문지 Vol.10 No.1

        본 논문에서는 LTCC(low temperature co-fired ceramic) 공정을 이용한 삽입된 수동 소자들을 갖는 필터 설계를 하였다. 우수한 성능과 소형화를 위해서 제안된 적층 구조의 기생 성분들은 제안된 회로 변환 과정을 통해 전체 필터 회로에서 긍정적인 효과를 갖도록 하였다. 그 결과 소형화된 저역 통과 필터는 다른 논문들의 소형화된 구조들에 비해 50프로 이상의 적은 두께를 갖을 뿐만 아니라 0.5 GHz와 5 GHz 사이에서 이상적인 저역 통과 필터의 응답을 보였다. This paper presents a filter design technique with the embedded passive elements using the low temperature co-fired ceramic (LTCC) process. For the high performance and size reduction, the parasitic elements of the proposed multi-layer structure are positively considered by using the proposed circuit transformation procedures. As a result, the compact low pass filter (LPF) not only has at least 50% more compact thickness than other reported compact structures, but also provides ideal LPF response between 0.5GHz and 5GHz.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼