RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        삼각패치형 저역 통과 여파기의 구현

        오송이(Song-Yi Oh),황희용(Hee-Yong Hwang) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.3

        본 논문에서는 계단 임피던스를 갖는 삼각패치형 5단 저역 통과 여파기를 제안한다. 제안된 구조는 일반적인 계단형 임피던스 저역 통과 여파기를 직각 이등변 삼각형으로 접어 구현한 구조로서, 설계법은 기존의 계단형 임피던스 여파기와 동일하다. 또한, 기존 계단형 임피던스 여파기와 다르게, 이 구조는 콤팩트하게 접히면서 생성된 slot들에 의하여 여파기의 차단 주파수 및 차단 대역폭과 감쇠극 특성을 조절할 수 있는 장점을 가지고 있고 또한, 소형화에 유리하다. 제작된 여파기는 13.75 mm×6.875 mm의 크기로 일반적인 계단형 임피던스 여파기에 비해 24.4 %의 크기가 감소되었다. 측정 결과, 통과 대역에서 -10 dB 이하의 반사 손실과 차단 대역에서 -10 dB 이하의 삽입 손실을 보였고, 약 3f<sub>c</sub>까지 차단되었다. In this paper, an stepped-impedance low pass filter(SI-LPF) of triangular-patch type is proposed. A SI-LPF designed according to the standard SI-LPF design procedure is folded as a right angled triangle. The figure of merits of this structure are the adjustabilities of the cut off frequency, the stopband and the attenuation pole frequency of the proposed LPF by varying the resultant slots after folding the SI-LPF compactly for miniaturization. The size of the fabricated LPF is 13.75 mm×6.875 mm, which is 24.4 % reduced one compared to that of the conventional SI-LPF. The measured results of the LPF show return loss of less than -10 dB at passband, insertion loss of less than -10 dB at stopband and wide stopband from 3.5 GHz to 10 GHz (about 3f<sub>c</sub>).

      • KCI등재

        슬롯을 가진 삼각 패치형 인공 전송 선로 결합기

        오송이(Song-Yi Oh),황희용(Hee-Yong Hwang) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.5

        본 논문에서는 사각형 모양으로 공간 활용성이 높은 콤팩트한 구조를 갖는, 슬롯이 있는 삼각 패치형 인공전송 선로 결합기를 제안한다. 일반적인 결합기는 λ/4 길이의 전송 선로를 사용하기 때문에 소형화의 한계를 가지고 있으나, 이 구조는 λ/4보다 작은 길이일 때 결합기가 최대 결합도를 갖는 특징을 나타내어 소형화에 유리할 뿐만 아니라, 슬롯의 길이를 변화시킴으로써 설계상에 임피던스와 위상 조절에 용이하도록 하였다. 제시된 인공 전송 선로 결합기의 설계 방법을 바탕으로 중심 주파수 2.4 ㎓에서 15 ㏈의 결합기를 시험 제작하여 제시된 방법의 유용성을 보였다. In this paper, an artificial transmission line coupler with slotted-triangular patches, which is compact and spacesaving structure, is proposed. The proposed structure has specific features of not only convenience for adjusting the characteristic impedance and the phase of its coupled line by varying the lengths of the slots of the artificial transmission lines in designing a coupler but also the maximized coupling value at less than λ/4 electrical length so that it can be designed in compact and small dimensions, while conventional coupled line couplers are generally limited in compact and miniaturized designs by their λ/4 transmission lines. A fabricated 15 ㏈ test-coupler at 2.4 ㎓ band by proposed design method shows good agreement with theory and simulation.

      • KCI등재
      • 농업용 트랙터 적용 정유압 기계식 변속기 연구 동향

        오송현 ( Song-hyeon Oh ),신창섭 ( Chang-seop Shin ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2

        농업용 트랙터는 작업기를 이용한 농작업이 주요 목적이다. 따라서 작업기로 동력을 전달하는 변속기가 매우 중요하다. 최근 트랙터의 변속기는 효율 및 편의성을 고려하여 무단변속기로 적용되고 있는 추세이다. 트랙터에 주로 적용되는 무단 변속기는 정유압 변속기(Hydro-static transmission)와 정유압 기계식 변속기(Hydro-mechanical transmission)가 있다. HST는 내구성이 우수하고 전·후진 조작이 용이하다는 장점이 있지만, 효율이 낮아 50마력 이하의 소형 트랙터에 주로 적용되고 있다. 이러한 단점을 보완하고 HST의 장점을 살려 개발된 변속기가 바로 HMT이다. HMT는 HST의 기동력과 기계식 변속기의 우수한 동력 전달이 결합된 구조로 출력비가 높고 무단변속이 부드러워 중·대형 트랙터에 적용될 수 있는 변속기이다. YANMAR에서는 45~113마력 트랙터 모델에 HMT를 탑재하여 출시하였고, 국제종합기계에서도 HMT를 탑재한 이앙기를 선보이고 있다. 이처럼 HMT는 상용화가 될 만큼 유용한 기술이라고 판단된다. 향후 HMT가 적용된 농업용 트랙터 개발의 가속화가 이루어질 것으로 예상되며, 특히 중·대형 트랙터에 적용되어 사용자의 수요를 만족하는 제품이 출시될 것으로 기대된다.

      • KCI등재

        초음파검사의 경동맥내중막두께와 심장이완기능의 상관관계 분석

        오송미(Song-Mi Oh),이상훈(Sang-Hun Lee),지태정(Tae-Jeong Ji) 대한방사선과학회(구 대한방사선기술학회) 2022 방사선기술과학 Vol.45 No.5

        In this study, 230 subjects of medical examination were investigated to figure out the relationship with common carotid artery intima-media thickness and cardiac diastolic function. In addition, the change in the carotid artery intima- media thickness according to the presence or absence of metabolic syndrome was examined. As a result of the study the carotid artery intima-media thickness was thick as the age increased and there was a large difference in those in their 60s and over. There was no gender difference. As for metabolic syndrome the carotid artery intima-media thickness was thicker in the study subjects with high blood pressure diabetes and dyslipidemia. The correlation between the carotid artery intima-media thickness and diastolic function indexes was significant. As a result of hierarchical regression analysis the thicker the intima-media thickness in the carotid artery the lower cardiac diastolic function.

      • KCI등재

        삼각 패치형 인공 전송 선로를 이용한 브랜치 라인 하이브리드

        오송이(Song-Yi Oh),황희용(Hee-Yong Hwang) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.7

        본 논문에서는 슬롯을 갖는 삼각 패치형 인공 전송 선로를 이용한 브랜치 라인 하이브리드를 제안한다. 제안된 인공 전송 선로는 구조가 콤팩트하고 슬롯의 파라미터들을 변화시킴으로써 선로의 특성 임피던스와 전기적 길이를 조절하는 데 용이하여 일반적인 전송 선로를 소형화시키는 데 유용하다. 제안된 브랜치 라인 하이브리드는 이러한 직각 삼각형의 인공 전송 선로들을 이용하여 구현되었기 때문에 공간의 활용도가 높고 소형화되었다. 제작된 3 ㏈ 브랜치 라인 하이브리드는 중심 주파수 2.45 ㎓의 15 % 대역폭 내에서 ±0.5 ㏈의 결합도 변화특성과 두 출력 포트 간 91°±4°의 위상차 특성을 보였다. 또한, 제안된 브랜치 라인 하이브리드의 크기는 일반적인 브랜치 라인 하이브리드 크기의 38 %이다. A branch-line hybrid using microstrip artificial transmission lines(ATLs) with slotted-triangular patches is proposed. The proposed artificial transmission line is compact in structure as well as easy to adjust the characteristic impedance and electrical length of equivalent transmission line by changing the slot’s parameters; hence, it is useful for miniaturizing conventional transmission lines. The designed branch-line hybrid, because of the use of the right angled isosceles triangular shaped artificial transmission lines as building blocks, has no useless empty space, and hence optimally miniaturized. A fabricated 3 ㏈ branch-line hybrid shows the coupling variation of ±0.5 ㏈ and the phase difference between two output ports of 91°±4° within 15 % bandwidth at 2.45 ㎓ center frequency. The size of proposed branch-line hybrid is only 38% of the conventional branch-line hybrid.

      • KCI등재

        슬롯을 가진 사각 패치형의 발룬-대역 통과 여파기

        오송이(Song-Yi Oh),황희용(Hee-Yong Hwang) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.11

        본 논문에서는 슬롯을 가진 마이크로스트립 사각 패치 형태의 balun-BPF를 제안한다. 기존의 balun-BPF는 대역폭이 좁고 손실이 다소 큰 단점을 가지고 있다. 이런 점을 개선하기 위해 사각 패치 평면에 수직으로 교차하는 슬롯을 넣고 한 모서리에 perturbation을 준 구조를 제시한다. 이러한 구조는 패치의 공간을 최대로 활용하기 때문에 손실을 줄일 수 있고 또한, 슬롯의 길이를 변화시킴으로써 주파수를 조절하고 대역폭을 넓힐 수 있다. 시험 제작된 balun-BPF는 2.4 ㎓ 대역에서 300 ㎒(12.7 %)의 넓은 대역폭과 0.56 ㏈의 낮은 삽입 손실을 가지며, 두 출력 포트 간에 184°±15° 이내의 위상차와 1 ㏈ 이내의 출력차를 나타낸다. In this paper, a microstrip balun-BPF of slotted-square-patch type is proposed. The conventional balun-BPF has some drawbacks of narrow bandwidth and high insertion loss. In order to improve these weak points, we used a square patch in designing balun-BPF on which two slots intersecting perpendicularly and one corner-edge perturbation are adopted. This structure allows one of the most effective use of the patch space so that the insertion loss can be decreased. Changing the slot lengths is use to control the operating frequency and the bandwidth of the balun-BPF. A fabricated balun-BPF shows wide bandwidth of 300 ㎒(12.7 %), small insertion loss of 0.56 ㏈, phase difference of 184°±15° and amplitude imbalances of within 1 ㏈ between two output ports at 2.4 ㎓ band.

      • KCI등재
      • 바이오매스에 도시형 유기성 폐기물을 혼합한 신연료의 열분해 특성

        오송열(Song-Yul Oh),김래현(Lae-Hyun Kim),최선용(Sun-Yong Choi),김희준(Hee-Joon Kim) 한국에너지학회 2005 한국에너지공학회 학술발표회 Vol.2005 No.-

        Pyrolysis reaction of blend materials with Biomass Waste and Organic Waste was carried out in batch reactor built in our lab. As biomass materials, rice husk, sawmill of cypress waste used and waste styrene, waste paper was used as additives. The ranges of pyrolysis temperature were from 600 to 900℃ in N2 Gas. From the experimental data, this reaction was first order reaction. The relevant kinetic parameters(apparent active energy and apparent frequency factor) were determined for the rice husk and sawmill: E = 19.47 kJ/㏖, A= 0.09935 sec?¹(rice husk) and E = 18.45 kJ/㏖, A = 0.10546 sec?¹(sawmill). When the municipal organic waste materials was mixed in raw biomass, the activation energy was decreased.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼