http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저선량에서의 TrueX 재구성 방법에 의한 유용성 평가
오세문,김계환,김승정,이홍재,김진의,Oh, Se-Moon,Kim, Kye-Hwan,Kim, Seung-Jeong,Lee, Hong-Jae,Kim, Jin-Eui 대한핵의학기술학회 2011 핵의학 기술 Vol.15 No.2
최근 진단분야에서 PET/CT는 종양학 분야뿐만 아니라 심장 신경 등 여러 가지 분야에서 널리 활용되고 있다. PET/CT의 중요성이 높아지면서 영상의 질과 관련된 재구성 방법에 대한 연구도 활발히 진행되고 있다. 이 중 Siemens사의 TrueX 재구성 방법을 phantom 실험을 통해 Iterative 2D 재구성 방법과 비교 평가하여 임상적 유용성을 높이고자 하였다. 선량에 따른 영상을 비교 평가하기 위해 contrast ratio와 FWHM을 측정하였고 Biograph 40 True Point PET/CT (Siemens, Germany)를 사용하여 실험을 실시하였다. Contrast ratio를 구하기 위해 NEMA IEC PET body phantom (Data Spectrum Corp.)을 이용하였고, FWHM을 측정하기 위해 capillary tube를 사용하였다. 모든 영상은 10분씩 획득하였고, 영상 재구성은 현재 사용하고 있는 TrueX와 기존에 사용하던 Itertive 2D 알고리즘을 사용하였다. Iterative 2D는 임상에 적합한 parameter 조건을 적용하고 TrueX는 Siemens에서 권고하는 parameter를 적용하여 실험하였다. Capillary tube를 사용하여 FWHM을 측정한 결과, TrueX가 Iterative 2D 방식보다 낮게 나왔다. 저선량일수록 FWHM의 차이가 점점 커졌다. NEMA IEC PET body phantom을 사용하여 contrast ratio를 구한 결과, TrueX가 Itertive 2D보다 좋은 양상을 보였다. 그러나 선량에 따른 차이는 보이지 않았다. 본 연구에서는 영상 분석을 통해 TrueX가 Itertive 2D보다 contrast ratio와 spatial resolution이 높게 나타났다. 또한 TrueX를 통한 재구성 결과 저선량일수록 기존의 Iterative 2D보다 resolution은 좋은 양상을 보였고 contrast ratio는 큰 변화를 보이지 않았다. 즉 PET/CT에서 TrueX 재구성 기법이 환자의 피폭도 절감하고 질적으로 우수한 영상을 구현할 수 있어 임상적 이용가치가 높다고 생각된다. Purpose: Recently in diagnostics area PET/CT is using a variety of areas including oncology, as well as in cardiology, neurology, etc. While increasing in the importance of PET/CT, there are various researches in the image quality related to reconstruction method. We compared and tested Iterative 2D Reconstruction Method with True X Reconstruction method by Siemens through phantom experiment, so we can see increasing of clinical usefulness of PET/CT. Materials and Methods: We measured contrast ratio and FWHM due to evaluating images on dose and experiment using Biograph 40 True Point PET/CT (Siemens, Germany). Getting a result of contrast ratio and FWHM, we used NEMA IEC PET body phantom (Data Spectrum Corp.) and capillary tube. We used the current TrueX and the previous Iterative 2D algorithm for all images which have 10 minutes long. Also, a clinical suitability of parameter for Iterative 2D and a recommended parameter by Siemens for True X are applied to the experiment. Results: We tested FWHM using capillary tube. As a result, TrueX was less than Iterative 2D. Also, the differences of FWHM get bigger in low dose. On the other hand, we tested contrasts ratio using NEMA IEC PET body phantom. As a result, TrueX was better aspect than Iterative 2D. However, there was no difference in dose. Conclusion: In this experiment, TrueX get higher results of contrast ratio and spatial resolution than Itertive 2D through experiment. Also, in the reconstruction result through TrueX, TrueX had better aspect of resolution than Iterative 2D in low dose. However, contrast ratio had no specific difference. In other words, TrueX reconstruction method in PET/CT had higher clinical value in use because TrueX can reduce exposure of patient and had a better quality of screen.
오세문(Se-moon Oh),금민하(Min-ha Keum),김동혁(Dong-hyeok Kim),김진상(Jin-sang Kim),조원경(Won-kyung Cho) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.12A
본 논문은 최근 표준화가 완성된 IEEE 1451.5 표준을 적용한 네트워크 접속가능한 응용프로세서(NCAP: network capable application processor)와 무선 트랜듀서 접속 모듈(WTIM:wireless transducer interface module)의 구현에 대한 연구이다. PC와 무선통신 모듈로 구성되는 NCAP부와, FPGA, 센서 보드, 무선 통신모듈로 구성되는 WTIM 부로 구성된다. NCAP부의 구현에는 C++ 언어가 사용되었고 WTIM 구현에는 FPGA를 이용하여 Verilog-HDL이 사용되었으며 NCAP과 WTIM과의 무선통신은 Zigbee를 이용하였으며 Zigbee의 기능구현을 위하여 nesC를 이용하였다. 본 논문에서는 NCAP과 WTIM은 IEEE 1451.0와 IEEE 1451.5 표준을 통하여 서로 통신하도록 구현하였으며 표준에 근거하여 두 가지 실험을 실시하였다. 실험을 통하여 제안된 구조가 IEEE 1451.5 표준의 기능적인 부분을 효과적으로 수행하는 것을 검증하였다. This paper presents an implementation of the Network Capable Application Processor (NCAP) and the Wireless Transducer Interface Module (WTIM) architectures based on the new IEEE P1451.5 standard. Proposed architecture is implemented using a computer for NCAP, an FPGA board, a sensor board and two radio modules, which communicate through the ZigBee wireless communication technology between the NCAP and the WTIM based on the IEEE 1451.0 and the IEEE 1451.5 interfaces. In this paper, two experiments has been done to verify operations of proposed architecture. From the experimental results, we verify that the proposed architecture performs the wireless sensor communication functions efficiently.