http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안경선,김남철,이일형 순천향대학교 부설 산업기술연구소 2012 순천향 산업기술연구소논문집 Vol.18 No.2
The acception for the specialized architectural capacity has been required by the accredited professional institutes such as UVCAE(UNESCO-UIA Validation Council for Architectural Education) according to the latest international tendency of the architectural education. Finally this trend founds the KAAB(Korea Architectural Accreditation Board) in Korea. Therefore 4-year-programmed university of Korea has been transformed into 5-year-course architectural education institute since 2002. With the start of this, there is an establishment of 72 programs for 5-year-course architectural education institute and 3 programs for architectural graduate school in 2011. In accordance with the revision of architectural laws mentioned by Ministry of Land, Transportation and Maritime Affairs, they need an approval for the certified institute of 5-year-course for the qualification to get approved as an registered architect. Ministry of Education, Science and Technology also asks more professional education in all kinds of fields, likewise, there are many demands for educational accrediting systems. Therefore, this study has an aim to accept these tendencies of changed circumstance for architectural education and to prepare the accreditation of ‘Korea Architectural Accrediting Board’ for 5-year-course architectural education at Dept. of Architecture in Soonchunhyang University. This process of research is to find requirements of accrediting regulation characteristics and help to prepare an accreditation for 5-year-course architectural education systems at Dept. of Architecture in Soonchunhyang University. This study has an aim to help both program formation at Dept. of Architecture in Soonchunhyang University and approval for the certified institute of 5-year-course. The following contents of paper is detailed analysis for the accreditation of architectural education program at Pusan National University and the result of analyzed characteristics in its Architecture Program Report.
노치 합판 전단접합부를 활용한 목재-콘크리트 합성 슬래브의 내화성능평가
안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),김지용 ( Ji Yong Kim ),김민정 ( Min Jeong Kim ),오재원 ( Jae Won Oh ),이광률 ( Gwang Ryul Lee ),방준식 ( Junsik Bang ),황성욱 ( Sung-wook Hwang ),이태경,여환명 ( Hwanmyeong Yeo ),곽 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.2
본 연구에서는 목재-콘크리트 합성 슬래브의 2시간 내화성능을 평가하고자 한다. 본 연구의 합성 슬래브는 구조용 합판을 노치형태로 가공한 전단접합부를 활용하여 목재와 콘크리트를 결합하였다. 기존 못접합 방식의 패널에서 제기되었던 층재 간격에 따라 층재의 넓은 재면이 노출되어 탄화속도가 증가할 수 있는 문제를 해결하고자, 합판 하단부에 2시간 내화도료를 도포하였다. 본 연구를 통해, 2시간 후 하부패널 잔여단면에 대한 합성 슬래브의 구조성능을 평가하고자 한다.
NLT-콘크리트 합성 슬라브의 합판 전단접합부 성능 평가
안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),김지용 ( Ji-yong Kim ),오정권 ( Jung-kwon Oh ) 한국목재공학회 2021 한국목재공학회 학술발표논문집 Vol.2021 No.1
The performance of Timber-concrete composite (TCC) system is decided by the type of shear connector which is used to connect concrete and timber. In this study, a novel shear connector was developed. To predict the effective bending stiffness (EI <sub>eff</sub>) of composite system with the γ-method, the slip modulus (K<sub>s</sub>) which is stiffness of the shear connector that we designed was investigated. The shear connector made by plywood with 24mm thickness was arrayed between timber and connected by nail. Because the connector was connected with different method for concrete and timber, double shear tests were conducted to investigate K<sub>s</sub> of each material. The K<sub>s</sub> of timber-plywood and concrete-plywood were 16.61kN/mm and 43.56 kN/mm, respectively. Compared with inclined self-tapping screw (STS) and metal plate which are often used as shear connector in composite system, the K<sub>s</sub> of concrete-plywood slip modulus was higher than STS. Although the plywood shear connector was lower than metal plate, it can be used as low energy building material compared with metal connectors.
합판 전단접합부를 활용한 목재-콘크리트 합성 슬라브의 개발
안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),김지용 ( Ji-yong Kim ),김민정 ( Min-jeong Kim ),오재원 ( Jae-won Oh ),황성욱 ( Sung-wook Hwang ),이태경 ( Taekyeong Lee ),방준식 ( Junsik Bang ),여환명 ( Hwanmyeong Yeo ),곽효원 ( 한국목재공학회 2021 한국목재공학회 학술발표논문집 Vol.2021 No.2
본 연구는 국산 낙엽송 구조용 합판을 전단접합부로 활용한 고강도/강성 목재-콘크리트 합성슬라브의 개발을 목표로 한다. 합성 시스템 구조 성능의 영향을 미치는 전단 접합부의 slip modulus를 이중전단 실험을 통하여 측정하였고, 하단부가 못으로 접합된 목재(Nail-laminated timber)와 콘크리트 합성 시스템에서 주로 활용되는 Self-tapping screw, metal plate와 비교하여 유사하거나 그 이상의 성능을 보이는 것으로 확인하였고, 이 밖에 제작 편의성, 환경적인 측면을 고려하였을 때 목재-콘크리트 합성 슬라브의 전단접합부로 적용가능할 것으로 여겨진다. 본 연구에서는 6m 길이의 슬라브를 ①330mm (실제 슬라브높이), ②245mm (2시간 탄화 후 잔여 높이), 두 높이로 구성하여 실험재의 4점하중 휨 실험을 통해 측정된 유효휨강성, 휨강도 등의 구조적 성능을 평가할 예정이다. 이를 Eurocode 5에서 제시하고 있는 합성 시스템의 예측기법인 Gamma method를 활용한 예측값과 비교하여 실제 슬라브의 구조성능의 예측가능 여부를 판단하고자 한다. 기대효과로는 하단부 목재와 합판이 못으로 연결이 되기 때문에, 접착면을 위한 대패과정이 요구되지 않아 높은 수율을 얻을 수 있으며, 노치접합부와 유사한 합성거동 시스템으로 전체적으로 우수한 유효 휨강성(예상 유효 휨강성: 4.53X10<sup>13</sup> N·㎟)을 보유할 것으로 예상된다.
국산 낙엽송 목재에서 축 방향 하중을 받는 self-tapping screw의 못뽑기 성능 예측
안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),김지용 ( Ji-yong Kim ),오정권 ( Jung-kwon Oh ) 한국목재공학회 2020 한국목재공학회 학술발표논문집 Vol.2020 No.1
In this study, the withdrawal resistances of axially loaded self-tapping screw were investigated for three types of domestic wood products, solid wood, plywood, and cross-laminated timber(CLT) made by Larix Kaempferi . Two types of screws (Ø6.5×65 mm and Ø8.0×100 mm) were used, and the screws were loaded axially with universal test machine (UTM) along with KS F ISO 9087:2004. About thirty specimen were tested for each wood products to derive the lower 5<sup>th</sup> percentile value from weibull distribution and non-parametric 5th point estimate. The test data were compared with the data predicted by withdrawal design formula in NDS to confirm the applicability of the design formula for domestic wood products. As a result, the lower 5<sup>th</sup> percentile values of test data for all products were higher than those predicted by NDS design formula, and it is possible to apply the NDS withdrawal design formula for domestic wood products.
노치 합판 전단접합부를 활용한 목재-콘크리트 합성 슬라브의 휨 성능
안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),김지용 ( Ji-yong Kim ),김민정 ( Min-jeong Kim ),오재원 ( Jae-won Oh ),황성욱 ( Sung-wook Hwang ),이태경 ( Taekyeong Lee ),방준식 ( Junsik Bang ),여환명 ( Hwanmyeong Yeo ),곽효원 ( 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.1
최근 중고층 목조건축물에 대한 관심이 집중되면서, 목재와 타 재료의 하이브리드를 통한 고성능 부재 개발에 대한 연구가 활발히 이루어지고 있다. 그 중, 목재-콘크리트 합성 시스템(Timber-concrete composite, TCC)은 순수목재부재에 비해 강성, 구조 효율성, 진동, 차음, 내화 측면에서 우수한 성능을 보이는 것으로 알려져있다. 합성 시스템의 구조성능은 주요 구성요소인 목재, 콘크리트의 물성뿐만 아니라, 두 재료를 연결하는 전단 접합부의 성능에 영향을 받는다. 본 연구에서는 기존 노치 전단접합부가 우수한 강성을 보인다는 점에서 착안하여, 24T 구조용 합판을 활용하여 노치 전단접합부를 고안하였다. 고안된 전단접합부를 활용한 TCC의 휨강도 및 유효 휨강성을 3등분점 4점하중실험을 통해 평가하고, Eurocode 5에 명시되어있는 gamma method를 활용하여 예측한 성능과의 오차를 비교하였다. 실험체는 노치 합판 전단접합부를 하부 E10등급 국산 낙엽송에 못접합하여 구성된 패널 위에 압축강도 27MPa 콘크리트를 타설하여 제작하였다. 모든 실험체의 면적은 288×6210mm로 동일하게 제작하였고, 두께는 기본 설계 슬라브 높이 330mm와 낙엽송의 일면탄화속도를 고려한 2시간 탄화 후 잔여높이 245mm, 두 유형으로 구성하여 각각 10개씩 제작하였다. 실험 결과, 두 유형에서 실제 휨 강도는 예측값에 비해 낮은 수치를 보였으나 그 오차가 크지 않았던 반면 (-8%,-15%), 유효 휨 강성은 예측보다 큰 오차로 높은 수치(36%,42%)를 보였다.