http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
대기압 화염 플라즈마 처리한 다중벽 탄소나노튜브 및 카본블랙 강화 고무복합재료의 기계적 특성 연구
성종환(Jong Hwan Sung),이동주(Dong Joo Lee),류상렬(Sang Ryeoul Ryu),조이석(Yi Seok Cho) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.4
다중벽 탄소나노튜브(MWCNT) 및 카본블랙(CS) 함유량, 대기압 화염 플라즈마(APFP) 처리 그리고 산처리를 함수로 한 고무복합재료의 기계적 특성에 대해 연구하였다. 고무복합재료의 인장강도 및 탄성율은 MWCNT의 함유량 증가에 따라 순수상태 그리고 동일량의 CS가 보강된 상태에 비해 증가하였다. APFP 처리한 MWCNT를 보강한 복합재료는 처리하지 않은 경우에 비해 강화효과(높은 강도, 높은 탄성율 그리고 높은 연성)를 보였다. 반면에 APFP 처리한 CS를 함유한 복합재료는 처리하지 않은 경우에 비해 연화효과(높은 강도, 낮은 탄성율 그리고 높은 연성)를 보였다. 산처리 시간이 1시간에서 2시간으로 증가할수록, 그리고 황산의 농도가 60%에서 90%로 증가할수록 복합재료의 인장강도와 탄성율은 감소하였다. 전체적으로 MWCNT 함유량, CS 함유량, 대기압 화염 플라즈마 처리, 황산 농도 그리고 산처리 시간 등이 고무복합재료의 기계적 특성에 영향을 미치는 중요한 변수임을 확인하였다. The mechanical properties of elastomeric composites were investigated as functions of carbon nano tube(MWCNT) content, carbon black(CB) content, atmospheric pressure name plasma(APFP) treatment and acid treatment. The tensile strength and modulus increase with increasing MWCNT content when compared to the pure rubber and the filled rubbers with same amount of CB. The composite with APFP treated MWCNT shows the hardening effect(high strength, high modulus and high ductility) when compared to the composite with untreated MWCNT. On the other hand, the composite with APFP treated CB shows the softening effect(high strength, low modulus and high ductility) when compared to the composite with untreated CB. As the refluxing time increases from 1hr to 2hrs and the sulfuric acid concentration increases from 60% to 90%, the tensile strength and modulus of the composite decrease. Overall, it is found that the MWCNT content, CB content, APFP treatment, sulfuric acid concentration and refluxing time have an important effect on the mechanical properties of NBR composites.
차종환(Cha, Jong-Hwan),한상열(Han, Sang-Yeol),이호준(Lee, Ho-Jun),고장욱(Go, Jang-Uk),이현주(Lee, Hyeon-Ju),오시덕(O, Si-Deok),신형기(Sin, Hyeong-Gi),이수갑(Lee, Su-Gap),김태욱(Kim, Tae-Uk),성대영(Seong, Dae-Yeong),박성배(Park, Seong 한국신재생에너지학회 2005 한국신재생에너지학회 학술대회논문집 Vol.2005 No.11
본 연구에서는 에너지 및 환경에 대한 문제가 대두되면서 기술 개발의 필요성이 높아지고 있는 풍력발전시스템에 대하여 750kW급 Geared Type 가변속 풍력 발전시스템을 개발하였다. 풍력발전시스템이 급속히 대용량화됨을 고려하여 MW급의 기술 조합이 반영되도록 설계하였으며, 베어링과 같은 국내 인프라가 부족한 구성품을 제외한 모든 구성기기들을 자체 설계/제작하였다. 블레이드는 국내 풍황에 적합하도록 자체 에어포일을 설계하여 개발하였으며, 가변속 제어를 위한 이중 여자 유도발전기 및 제어기와 Down sizing 구현을 위한 유성 및 헬리컬 기어 혼합형 증속기를 개발하여 시동 풍속 3.5m/s, 정지 풍속 25m/s, 정격 풍속은 12.7m/s이며 IEC 61400-1의 Class I 에 준한 750kW급 풍력 발전시스템을 개발하였다.
성종환,장곡천수부,송궁지지,내산아수,하주영,이문순,허재두,Sung, Jong-Hwan,Hasegawa, Hideo,Matsumiya, Satoshi,Uchiyama, Masamori,Ha, Joo-Young,Lee, Moon-Soon,Huh, Jae-Doo 한국생약학회 1995 생약학회지 Vol.26 No.4
The metabolism of ginseng saponins by human intestinal bacteria was studied using human feces under anaerobic culture conditions. $Ginsenoside-Rb_1$, $-Rb_2$ and -Rc(protopanaxadiol type) were mainly metabolized to compound-K(C-K), $20-O-[{\alpha}-L-arabinopyranosyl(1{\rightarrow}6)-{\beta}-{_D}-glucopyranosyl]-20(S)-protopanaxadiol(compound-Y,\;C-Y)$, $20-O-[{\alpha}-L-arabinopyranosyl(1{\rightarrow}6)-{\beta}-{_D}-glucopyranosyll-20(S)-protopanaxadiol(ginsenosied-MC,{\;}MC)$, respectively, and $ginsenoside-Rg_1$ and -Re(protopanaxatriol type) to their aglycon, 20(S)-protopanaxatriol, though the pathway and rate of the metabolism were affected by fermentation medium. C-K was not decomposed any more, while C-Y and Mc were both gradually hydrolyzed to C-K.
대기압 화염 플라즈마 처리한 다중벽 탄소나노튜브 및 카본블랙 강화 고무복합재료의 기계적 특성 연구
성종환(Jong Hwan Sung),이동주(Dong Joo Lee),류상렬(Sang Ryeoul Ryu),조이석(Yi Seok Cho) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.9
다중벽 탄소나노튜브(MWCNT) 및 카본블랙(CB) 함유량, 대기압 화염 플라즈마(APFP) 처리 그리고 산처리를 함수로 한 고무복합재료의 기계적 특성에 대해 연구하였다. 고무복합재료의 인장강도 및 탄성률은 MWCNT의 함유량 증가에 따라 순수상태 그리고 동일량의 CB가 보강된 상태에 비해 증가하였다. APFP 처리한 MWCNT를 보강한 복합재료는 처리하지 않은 경우에 비해 강화효과(높은 강도, 높 은 탄성률 그리고 높은 연성)를 보였다. 반면에 APFP 처리한 CB를 함유한 복합재료는 처리하지 않은 경우에 비해 연화효과(높은 강도, 낮은 탄성률 그리고 높은 연성)를 보였다. 산처리 시간이 1시간에서 2시간으로 증가할수록, 그리고 황산의 농도가 60%에서 90%로 증가할수록 복합재료의 인장강도와 탄성률은 감소하였다. 전체적으로 MWCNT 함유량, CB 함유량, 대기압 화염 플라즈마 처리, 황산 농도 그리고 산처리 시간 등이 고무복합재료의 기계적 특성에 영향을 미치는 중요한 변수임을 확인하였다. The effects of multi-walled carbon nanotube (MWCNT) content, carbon black (CB) content, atmospheric-pressure flame plasma (APFP) treatment, and acid treatment on the mechanical properties of elastomeric composites were investigated. For pure or filled rubbers with the given amount of CB (20 and 40 phr), the tensile strength and modulus of the elastomeric composites increase similarly with the MWCNT content. A composite with APFP-treated MWCNTs shows a hardening effect (high strength, high modulus, and high ductility) unlike the one with untreated MWCNTs. On the other hand, a composite with APFP-treated CB shows a softening effect (high strength, low modulus, and high ductility), which is unlike a composite with untreated CB. As the refluxing time increases from 1 h to 2 h and the sulfuric acid concentration increases from 60% to 90%, the tensile strength and modulus of a composite decrease. Thus, it is found that the MWCNT content, CB content, APFP treatment, sulfuric acid concentration, and refluxing time have an important effect on the mechanical properties of NBR composites.