http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서상교 ( Sang Kyo Seo ) 충북대학교 건설기술연구소 2011 建設技術論文集 Vol.30 No.2
실내공기질관리법 시행령 제 2조에 일정 규모 이상의 환경오염물질을 방출하는 건축 자재의 사용을 제한하고 있으며, Ks F 4937 『주차장 바닥용 표면 마감재』에서도 이와 동일한 내용으로 품질기준을 규정하고 있다. 이에 따라 환경 친화적이면서도 경제성을 확보한 대체 재료가 필요한 상황이다. 이에 본 연구에서는 변성 폴리올(P)과 이소시아네이트(I), 물과 분체 혼합물 등 4성분으로 구성된 박막형 수성 우레탄 모르타르 주차장 바닥용 마감재의 개발을 시도했다. 예비실험을 통하여 P제 및 I제와 물의 첨가량은 고정하고 분체 혼합물의 첨가량을 8가지 방법으로 변화시켜 제조한 시료를 1.0mm 내외의 두께로 타설 후 경화된 시험체 표면의 이색과 균열이 없는 시험체를 선정했다. 선정된 시험체를 대상으로 휨 강도와 압축강도 및 부착강도, 윤하중 저항 성능 등의 시험을 실시하였으며, 그 결과를 분석·검토한 후 주차장 바닥용 표면 마감재로서 사용 가능성 및 최적의 조성비를 제시하고자 했다. 실험 결과, 배합비가 P제 : I제 : 물 : 분체혼합물 = 1 : 2 : 0.6 : 3.35인 시험체에서 경화체 표면에 이색과 균열이 없었으며, KS F 4937에서 규정하고 있는 윤하중 저힝성능 및 휨 강도와 압축강도, 부착강도의 품질기준을 만족하는 것으로 나타났다. 결론적으로, 상기 배합비의 박막형 수성 우레탄 모르타르가 주차장 바닥용 표면 마감재로서 사용이 가능한 최적의 조성비인 것을 의미한다. According to the Article 2 of Enforcement Ordinances by the law for the Indoor Air Quality management, it imposes restrictions on the use of construction materials which emit more than a certain amount of environmental pollutants like TVOC, HCHO, Toluene for the underground parking lots in which the gross area is larger than 2,000m2. Also, the same quality standard is prescribed by KS F 4937 『Surface Finishing Materials for Parking Slab』. Therefore, the replacement materials are needed to secure both eco-friendliness and economic feasibility. Thus, this study attempted the development of a thin-film type water base urethane mortar which can be used as finishing material for parking slab, which is composed of four ingredients like modified polyol(P), isocyanate(I), H20 and powder mixture. Through preliminary experiments, samples were made with eight different amounts of the powder mixture keeping the same amount of other three ingredients like P, I, and H20. After placing these samples in the thickness of about 1.0mm, one sample was selected which had no different color and cracks on the hardened surface. The selected sample was tested about flexural strength, compressive strength, bond strength, and wheel-moving load resistance. The results were analyzed and examined to present the usability as a surface finishing material for parking slab with the optimum composition ratio. As the results of the experiments, it was found that there was no different color and crack on the surface of the hardened sample which had the composition ratio of P : I : H20 : Powder Mixture 1 : 2 : 0.6 : 3.35. Also, this sample satisfied the quality standard regarding dynamic wheel load resistance, flexural strength, compressive strength, and bond strength which are prescribed by KS F 4937. As a conclusion, it was confirmed that the thin-film type waterbase urethane mortar in the above composition ratio could be an optimum surface finishing material usable for parking lot slab floor.