http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Molten metal을 이용한 산성가스 고온습식 정제반응 연구
문지홍(Jihong Moon),방병열(Byungryeul Bang),황정호(Jungho Hwang),이은도(Uendo Lee) 한국연소학회 2015 KOSCOSYMPOSIUM논문집 Vol.2015 No.5
The feasibility of a molten metal as a fluid material to purify gas was investigated. The molten has various advantages such as high thermal conductivity, wide operating range and low viscosity. Tin was selected since its physical characteristics are suitable for the purpose. Acid gases (H₂S, COS, CO₂, etc.) are produced in gasification process and must be removed due to corrosion. In this study, reaction characteristics for acid gas removal using molten metal were investigated by equilibrium calculation and fundamental experiments.
바이오매스 가스화발전 vs 직접 연소 후 스팀터빈 발전의 경제성 비교
문지홍(Ji Hong Moon),방병열(Byung Ryeul Bang),이은도(Uen Do Lee),이정우(Jung Woo Lee),황의정(Eui Jeong Hwang) 한국연소학회 2010 KOSCOSYMPOSIUM논문집 Vol.- No.41
Economic feasibility of power generation system of biomass syngas engine and direct combustion of biomass with steam turbine was investigated. Due to the low energy density of biomass, there is a limit in the capacity of biomass power generation plant. In this study, small scale biomass power generation plants ranging from 0.5㎿e to 5㎿e was considered. As a result, syngas engine system using bio-syngas is more economical than steam turbine system at low capacity system. The steam turbine system becomes better than syngas engine if the capacity is over 5MWe.
125 ㎿<SUB>th</SUB> Oxy-PC Corner Firing Boiler 수치해석 연구
채태영(Taeyoung Chae),류태우(TaeU Yu),방병열(Byung Reol Bang),양원(Won Yang) 한국연소학회 2009 KOSCOSYMPOSIUM논문집 Vol.- No.38
Characteristics of oxy-PC(Pulverized coal) combustion are one of the key parameters for design of a PC boiler. In this study, a conventional corner-firing boiler for a 125 ㎿th PC power plant was numerically simulated under the conditions of air-PC and oxy-PC combustion, using FLUENT 6.3. We used discrete phase model for simulating behavior of coal particles, and drying, pyrolysis, char combustion, char gasification and volatile performed for various design conditions of an oxy-PC corner-firing burner such as flue gas recirculation ratio, velocities, temperatures and oxygen concentrations of the primary/secondary oxidizer. Simulation results of oxy-PC combustion were also compared with convectional air-PC conditions, and optimum operation conditions under the view of combustion, NOX emission and radiative heat transfer were discussed.
Gayatri Udaysinh Ingale,박소담(Sodam Park),방병열(Byungryeul Bang),정수화(Soohwa Jeong),오승진(Seungjin Oh),이현승(Hyunseung Rhee),정효재(Hyojae Jeong),박동호(Dongho Park),이은도(Uendo Lee) 한국열환경공학회 2020 한국열환경공학회 학술대회지 Vol.2020 No.춘계
지구온난화문제와 더불어 COVID-19 사태로 인해 에너지산업 전반에 재편이 논의되고 있는 가운데 세계 주요 국가들은 수소경제 주도권 확보를 통해 코로나로 인한 일자리 문제를 해결하는 동시에 저탄소 경제구조로의 전환을 극적으로 모색하고 있다. 최근 EU는 2030년까지 1,400억 유로 규모의 수소산업 육성 방안을 발표하였고, 미국도 2050년 7,500억 달러 규모 수소경제 조성 목표를 발표한 바 있다. 우리나라도 2019년 발표 된 수소경제 활성화 로드맵에 따라 수소산업 육성에 공격적인 투자를 진행하고 있으며, 현재 연간 13만 톤 규모의 수소 수요가 2030년 194만 톤, 2050년 526만 톤으로 확대될 것으로 예상되고 있다. 정부 로드맵에 따르면 현재 부생수소 및 추출수소에 전량 의존하고 있는 수소 생산 방식을 2040년 전체수요의 70%이상을 이산화탄소 발생이 없는 그린수소로 전환할 계획이다. 재생에너지 연계 수전해 시스템이 대표적인 그린수소 생산기술로 각광받고 있으나 수전해 기술의 성숙도와 재생에너지 보급 전망을 고려하면 중단기적으로 그린수소를 대량으로 생산할 수 있는 기술이 필요하며 열화학적 전환 공정을 통한 그린수소 생산은 가장 효과적인 방안의 하나이다. 열화학적 전환공정을 통한 그린수소생산 기술은 지구상에서 가장 큰 수소자원인 탄화수소와 물에서 CO2-free 조건으로 탄소를 제거하여 수소를 생산하는 다양한 기술적 접근을 제공할 수 있다. 대표적으로 바이오매스 가스화, 바이오가스 개질, 열화학적 사이클 활용 수분해 기술을 들 수 있으며 이러한 공정은 CCUS 기술과 연계되어 화석연료를 대상으로 한 블루수소 및 청록수소 생산에 활용될 수 있다. 본 발표에서는 열화학적 전환공정을 통한 그린수소 생산기술에 대한 연구개발 현황과 향후 전망에 대해 소개하도록 한다.