http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Design and Analysis on The Connections of RC Precast Large Panel
박강근,Park, Kang-Geun 한국공간구조학회 2006 한국공간구조논문집 Vol.6 No.2
본 연구에서는 철근콘크리트 프리캐스트 대형판의 접합부 설계방법 및 해석방법에 대해서 연구를 수행하였다. 접합부의 설계방법은 수평접합부와 수직접합부의 구조적 거동에 대한 안정성 및 일체성을 확보하기 위한 설계법을 제시하였고, 접합부의 해석은 강체스프링 모델에 의한 탄소성해석을 수행 하였다. Precast large panel structures have various connection system such as the horizontal slab-to-wall connection, the vertical wall to wall connection, horizontal slab-to-slab connection, etc. Horizontal connection is connected by vertical tie bars, and vertical joint is connected loop bars and shear keys. The basic function is equalized deformations on later forces and the entire wall panel assembly acts as monolithic actions. Under lateral load some slip occurs in almost vertical connections. The shape and detail of precast connections are very important to the monolithic behavior of overall structures. The paper is a study on the design method and new elasto-plastic analysis of the connections by rigid-bodies spring model.
박강근,Park, Kang-Geun Korean Association for Spatial Structures 2006 한국공간구조논문집 Vol.6 No.3
This paper is a study on the experiment and elasto-plastic discrete limit analysis of reinforced concrete circular cylindrical shell by the rigid-bodies spring model. In the rigid bodies-spring model, each collapsed part or piece of structures at the limiting state of loading is assumed to behave like rigid bodies. The present author propose new discrete elements for elasto-plastic analysis of cylindrical shell structures, that is, a rectangular-shaped cylindrical element and a rhombus-shaped cylindrical element for the improvement and expansion of this rigid-bodies spring model. In this study, it is proposed how this rigid element-bodies spring model can be applied to the elasto-plastic discrete limit analysis of cylindrical shell structures. Some numerical results of elasto-plastic discrete limit analysis and experimental results such as the curve of load-displacement and the yielding and fracturing pattern of circular cylindrical shell under horizontal load are shown.
박강근,윤승현,이장복,Park, Kang-Geun,Yoon, Seoung-Hyun,Lee, Jang-Bok 한국공간구조학회 2010 한국공간구조학회지 Vol.10 No.2
막 구조는 자유로운 형태, 경량성, 내구성, 햇빛 투광성 및 균질성 때문에 전 세계적으로 현대 건축물에 다양하게 사용되어 왔다. 새로운 막 재료의 개발로 새로운 건축 구조설계에 대한 가능성을 열어가고 있다. 최근 주로 사용되는 막 구조의 지붕 재료에는 PVC, PVF, PVDF, PTFE 코팅 막재 및 ETFE 막재가 수로 사용되고 있다. 건축용 막은 내화성, 강도 부족, 인열강도, 내구성 및 탄성 등에 대한 몇가지 문제점들을 가지고 있다. 이러한 문제점들을 평가하기 위해서 본 연구에서는 PVDF 코팅 폴리에스터 막재에 대한 인장강도, 인열 강도 및 반복하중거동 시험을 실시하여 건축용 막재의 기초적인 역학적 특성을 분석하고자 한다. 막재의 탄성계수는 337.30~1257.63N/$mm^2$, 신율은 17.90~26.91%로 주어졌다. Membrane structures are now used in various ways throughout the world with the merits of free shape, lightness, durability, sunlight transmittance and homogeneous material. The development of new membrane material opened up new possibility for the design of new building structures. Recently it was mainly used PVC, PVF, PVDF, PTFE, ETFE membrane for using the roofing material of membrane structures. Some problems of architectural membrane have fire proofing, lack of strength, tear resistance, durability and elasticity. For the estimation of this problems, it will be tested the basic mechanical properties of membrane material about tensile strength, tearing resistance and repeated loading behavior. Elastic modulus is 337.30~1257.63N/$mm^2$, and strain is 17.90~26.91%.
박강근,윤승현,배부환,Park, Kang-Geun,Yoon, Seoung-Hyun,Bae, Boo-Hwan 한국공간구조학회 2009 한국공간구조학회지 Vol.9 No.2
ETFE is the abbreviation of Ethlene Tetra Fluoro Ethlene, a sort of colorless and transparent granules. The advantage of ETFE film has chemical resistance, anti-stick property, very lightly material. The thickness of ETFE film is used to from 50 ${\mu}m$ to 300 ${\mu}m$ and have superior ability of daylight transmission and elongation, while the strength is lower than of fabric membrane. The tensile strength of ETFE film changes from 40Mpa to 60Mpa and the tensile strain at break can get to about 300-400%. The mechanical characteristic test of ETFE film is described in this paper. The tensile strain at break, the tensile strength and the stress-strain curve are obtained from the test. And then it was analyzed stress-strain characteristic by temperature and mechanical characteristic by cycling load. ETFE 막재는 Ethylene Tetra Fluoro Ethylene의 약자로 색깔이 없고, 투명한 필름 막이다. ETFE 필름의 장점은 내화학성이 있고, 잘 접히지 않으며, 매우 가볍운 재료라는 것이다. 필름의 두께는 50마이크로 미터에서 300 마이크로 미터 두께가 주로 사용되고, 직포가 없어며 햇빛 투과율이 우수하고 재료의 강도는 다른 막재에 비해서 낮다. ETFE 막재의 인장강도는 40MPa에서 60MPa 정도이고, 인장 변형도는 약 200%에서 400% 정도이다. 본 논문에서는 ETFE 필름 막재의 역학적특성 시험을 수행하였다. 인장 시험으로 부터 인장 변형도, 인장 강도, 응력 변형도 곡선을 구하였고, ETFE 막재의 항복 강도를 결정하여 탄성계수를 구하였다. 그리고 온도하중에 의한 응력-변형도 특성과 반복하중에 대한 필름의 역학적 특성을 분석하였다.
LRB 면진 장치를 갖는 100m 단층 래티스 돔의 지진 응답에 대한 감소 효과 분석
박강근,이동우,Park, Kang-Geun,Lee, Dong-Woo 한국공간구조학회 2019 한국공간구조학회지 Vol.19 No.1
The objective of this study is to investigate the earthquake response for the design of 100m spanned single-layer lattice dome. The plastic hinge analysis and eigenvalue buckling analysis are performed to estimate the ultimate load of single-layered lattice domes under vertical loads. In order to ensure the stability of lattice domes, it is investigated for the plastic hinge progressive status by the pushover increment analysis considering the elasto-plastic connection. One of the most effective methods to reduce the earthquake response of large span domes is to install the LRB isolation system of a dome. The authors discuss the reducing effect for the earthquake dynamic response of 100m spanned single-layered lattice domes. The LRB seismic isolation system can greatly reduce the dynamic response of lattice domes for the horizontal and vertical earthquake ground motion.