http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공정 컬럼의 감마선 스캔 방법(ISO 23159:2020) 해설
문진호(Jinho Moon),박장근(Jang Guen Park),정성희(Sung-Hee Jung) 한국비파괴검사학회 2021 한국비파괴검사학회지 Vol.41 No.6
감마선 스캐닝은 공정 컬럼의 가동 중 발생하는 다양한 문제의 해결을 위한 진단 목적으로 석유화학 및 정유공정에서 널리 사용되는 비간섭 및 비파괴 공정진단 방법이다. 해당 기술은 감마선 투과 계측기술을 기반으로 가동 중인 컬럼 및 반응기의 중단 없이 내부 상태 정보를 제공한다. 본 고는 2020년 6월에 제정된 “비파괴 검사-공정 컬럼의 감마선 스캔 방법”(ISO 23159: 2020)을 번역한 것으로 본래 취지를 정확히 전달하기 위하여 편집하거나 가감하지 않고 원문 그대로 기술하였다. 이 표준은 감마선 스캔 방법 이외에도 검사 인력의 권고사항, 밀봉방사선원 선택방법, 스캐닝 장비, 실제 접할 수 있는 현상에 대한 예시 등의 부속서를 포함한다. Gamma ray scanning is a non-intrusive and non-destructive method used extensively in petrochemical and chemical process plants for troubleshooting and diagnosis purposes. Gamma ray scanning provides the internal state information without interruption of columns and reactors in operations that are based on gamma ray transmission measurement. This study translates the “Non-destructive testing – Gamma ray scanning method on process columns” (ISO 23159:2020) published in June 2020 by explaining the original text without editing. In addition to gamma ray scanning methods, this standard includes annexes, such as, a recommendation for testing personnel, selection of sealed radiation sources, scanning equipment, and phenomena that may be encountered in practice.
방사성 동위원소를 이용한 제염제 혼합확산장치의 유동특성분석
오대민(Daemin Oh),강성원(Sungwon Kang),김영석(Youngsug Kim),정성희(Sunghee Jung),문진호(Jinho Moon),박장근(Jangguen Park) 大韓環境工學會 2017 대한환경공학회지 Vol.39 No.5
본 연구의 목적은 방사능 사고로 인한 오염물질 유입으로 인한 영향을 최소화하기 위한 제염제의 혼합확산장치 개발에 앞서 장치 가동으로 인한 혼합 및 확산영향을 예측하는데 있다. 유동특성분석을 위해 사용된 추적자는 방사성 동위원소는 Gy, To이며, 이를 검측하기 위해 2인치 NaI 방사선 검출기를 사용했다. 본 연구에 적용된 제염제 혼합확산장치의 임펠러는 3가지 type으로 제작하였다. 방사혼합형 임펠러는 상향류 흐름을 이용하여 수표면으로 확산이 가능하며, 최적의 조건을 찾기 위해 핀 구조를 조정하였다. 방사능 동위원소를 이용한 제염제 혼합확산장치의 유동특성을 분석한 결과, 모델별 혼합확산과 유동패턴특성을 획득하였다. Model 3 type은 별도의 Fin유도부와 보조 Fin이 구성되어 있어 다른 type의 임펠러보다 확산속도가 크고 완전혼합에 도달하는 시간이 짧게 나타났다. The purpose of this study was predicted the effects of mixing and diffusion due to the operation of the apparatus before the development of the mixed diffusion device for the decontamination absorbent to minimize the influence of contaminant inflow due to radiation accident. The tracer used for the flow characteristics was <SUP>68</SUP> Ga, <SUP>99m</SUP> Tc, which is a radioactive isotope, and 2 inch NaI radiation detector was used to detect it. The impeller of the decontamination mixed diffusion system applied to this study was made into three types and the mixing diffusion effect was compared. As a result of analyzing the flow characteristics of the radio-isotope with decontamination mixed diffusion device, mixing, diffusion and flow pattern were obtained. The radial mixing type impeller was able to diffuse to the water surface by the upflow flow, and the fin structure was adjusted for finding optimal conditions. The model 3 type consists of a fin guiding part and an auxiliary fin so that the diffusion speed is higher than that of other types of impellers. It also showed a short time to reach complete mixing.