RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        건설 현장 내 비점오염원 처리 특성 평가

        최영화(Choi Younghoa),김창용(Kim Changryong),김효상(Kim Hyosang),오지현(Oh Jihyun),정설화(Jeong Soelhwa) 한국지반환경공학회 2010 한국지반환경공학회논문집 Vol.11 No.6

        강우 시, 건설 현장 내에서 발생하는 비점오염원의 경우 타 오염 물질 대비 부유 물질 부하량이 매우 높게 나타나며 강우 강도에 대한 민감도가 공사 초반의 경우 매우 높게 나타난다. 이러한 비점오염원을 저감할 수 있는 시설로 가설형 비점오염원 처리시설과 여과형 처리 시설이 있다. 가설형 시설의 경우 전반적으로 비점오염원에 대한 저감 효율이 제한적이며, 여과형 처리 시설의 경우 동력의 소모가 높고, 공간적 효율성이 다소 떨어진다는 단점이 있다. 따라서, 본 연구에서는 기존의 비점오염원 처리 시설의 단점을 해소하고 보다 높은 비점오염원 처리 효율을 확보하기 위해 조립식 응집?침전 시스템을 개발하여 현장에 적용하여 비점오염원 처리 특성을 평가하고자 하였다. 조립식 응집?침전 시스템의 경우 가설 형식이나 여과형 처리 시설 대비 매우 높은 처리 효율을 나타내며, 공간적 효율성이 매우 높은 것으로 나타나 비점오염원 발생 인근 지역의 수계 오염 방지 및 민원 발생 방지 효과가 있을 것으로 기대할 수 있었다. 이러한 조립식 응집?침전 시설의 현장 적용 시, 최적의 비점오염원 저감 효과를 확보하기 위해서는 발생 비점오염원의 농도에 따라 적정 응집제 주입량 산정 및 슬러지 순환 시설의 적용 및 지속적인 유지 관리를 통한 침전 슬러지의 계면 높이 조절이 반드시 필요하다. Total suspendid solid (TSS) of non point source pollutants in construction site are in higher concentration than others (BOD, COD etc). Also, the TSS concentration is very sensitive to the rainfall intensity in early stage of construction. There are two methods for treatment of non point source pollutants, which are temporary treatment facility and filtering one. But they have disadvantages. Temporary facility system has very low efficiency and filtering system consumes high energy and takes up large footprint. This study shows how prefabricated flocculation/coagulation system is developped to cover the above weakness and evaluation of the system performance in construction site. The prefabricated flocculation/coagulation system has very high treatment efficiency comparing with temporary and filtering system and takes small footprint. Therefore, it expects that the system leads to prevention of pollution near construction site and reduction of public grievance. Proper coagulant dosage and sludge circulation facility application, controlling the height of sludge interfacial are necessary to maximize the system efficiency.

      • KCI등재

        건설 현장 내 비점오염원 처리 시설의 제거 특성 평가

        최영화(Choi Younghoa),정설화(Jeong Seolhwa),김창용(Kim Changryong),김효상(Kim Hyosang),오지현(Oh Jihyun) 한국지반환경공학회 2009 한국지반환경공학회논문집 Vol.10 No.3

        본 연구는 건설 현장에서 발생하는 비점오염원 발생 특성에 대해서 파악하고, 이에 대한 관리 기술들을 적용하여, 각 시설별 효과에 대해 평가하고자 하였다. 건설 현장의 공사 단계별로 비점오염원의 발생 특성을 보면, 공사 초반 즉, 토양 피복 상태가 교란되어 있는 경우, 강우 시 부유물질 부하량이 높게 나타나며, 강우 강도에 대한 민감도가 공사 후반에 비해 높은 것으로 확인되었다. 건설 현장에서 가설 형식으로 적용할 수 있는 기술로는 부유물질을 제어할 수 있는 Check dam, Silt fence 공법과 강우 시 토사 유실을 원천적으로 제어하는 Geotextile공법을 적용한 결과, Geotextile이 다른 공법에 비해 비점오염원 유출량 제어에 효과적인 것으로 확인 되었다. Check dam과 Silt fence는 공극에 의한 부유물질 제거 기능이 일부 있으나, 전반적으로 일시적 저류에 의한 침강효과로 오염물질을 제거 하는 특징이 있다. 이러한 가설 형식 처리 시설의 경우, 처리 효율이 낮아 주변 민원 또는 수계 오염을 유발할 수 있으며, 이에 부가적으로 가압식 여과 방법을 통해 연계 처리한 결과 만족할 만한 방류 수질을 기대할 수 있었다. 또한, 이러한 여과 방법은 여과 속도와 유입 부하량에 따라 처리 가능한 부하량이 결정되며, 효과적 운전을 위해서는 전처리가 반드시 필요하다. This study was conducted to investigate characteristics of the non-point source pollution under construction and evaluate available pollution control methods. Suspended solid loading is high when soil disturbs by rainfall and this phenomenon is much more severe at the initial stage of construction than at the final one. There are three methods available for erosion and sediment control, which are check dam, silt fence, and geotextile. Check dam and silt fence are for control of suspense solids and geotextile is for preventing soil erosion during rainfall. They can be installed as temporary control facilities at construction sites. From the comparison of those methods, it was found that geotextile method was the most efficient for the runoff control of non-point source pollution. Check dam and silt fence can remove suspense solids by pore spaces to some degree, but the removal of pollutants mainly occurs through sedimentation. Because the temporary control facilities have limited removal efficiency of pollutant, they often cause civil claims and contamination of water environment. Hence, using a pressurized filtration system along with temporary control facilities, highly enhanced treatment efficiency was anticipated. In addition, the loading capacity of these techniques depends on filtration velocity and input loading. And their pre-treatments are necessary for efficient operation.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼