http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자동차 외장 램프용 고분자의 흡습 거동 및 치수 변화에 관한 연구
김보람(Bo-Ram Kim),정선경(Sun Kyoung Jeoung),고윤기(Youn Ki Ko),하진욱(Jin Uk Ha),김야원(Ya Won Kim),이승연(Seung Yeon Lee),김종수(Jongsu Kim),이정환(Jung Hwan Lee),이평찬(Pyoung-Chan Lee) 한국고분자학회 2018 폴리머 Vol.42 No.6
본 연구에서는 자동차 외장 램프에 사용되는 고분자 소재(ASA, ABS, PMMA, PC, PP, PPS)의 수분 흡습거동과 이에 따른 치수 변화에 대해 연구하였다. 수분 흡습의 초기 거동은 확산 지배 방정식인 Fick의 제 2법칙을 따르는 거동을 보였다. 수분 흡습에 따른 치수 변화를 분석하기 위해 각 샘플의 길이 수분 흡습 후 길이 변화를 측정하였으며, 그 결과 수분 흡습에 따라 치수가 증가하는 변화를 보였다. 또한, 최대 흡습량이 증가한 소재일수록 치수변화도 증가하는 것을 확인하였다. 수분을 흡습한 고분자의 열팽창계수는 건조된 고분자 대비 최대 33%(본 연구에서는 PMMA의 경우) 감소된 값을 보였다. 이는 수분 흡습에 의해 1차적으로 팽창하여, 열에 의한 팽창이 상대적으로 감소한 것으로 판단된다. Moisture sorption behavior and dimension change of polymeric materials (ASA, ABS, PMMA, PC, PP, PPS) for automotive exterior lamp has been investigated. The variations of the moisture sorption have been represented following the theoretical model of the Fick’s 2nd law of diffusion. In order to understand the dimensional change during the moisture sorption process, the change in length of each sample was studied. The length of polymeric materials increased as equilibrium water content increased. The moisture absorbed polymer materials provided a 33% decrement of the coefficient of thermal expansion, seemingly by swelling the polymer materials under atmosphere condition.
헤드램프 습기 발생에 대한 구조물 발수량의 영향도 분석
이철우(Lee, Chul Woo),최봉근(Choi, Bong Keun),김억(OK Kim),김야원(Ya Won Kim) 한국자동차공학회 2014 한국자동차공학회 부문종합 학술대회 Vol.2014 No.5
The headlamp is key part of the whole car-image. These days, the design of headlamp is very splendor and head lamp is much more complicated than before. The headlamp structure is so complex, that it should consist of many plastic components. But plastic materials involve vapor. When the headlamp is turned on, the plastic parts start to release the vapor, it causes fog on the lens. This research analyzes the effect of vapor release on fog generation using CFD.