http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권미라(Mira Kwon),임재혁(Jae Hyock Lim),최병오(Byeong O Choi),이정복(Jungbok Lee),홍문근(Moongeun Hong),이수용(Soo Yong Lee) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
우주발사체 가스발생기의 안정적인 연소를 위한 가스발생기용 점화기로서 설계 구조가 간단한 파이로 점화기를 개발하였다. 개발된 파이로 점화기는 가스발생기 추진제의 점화 및 신뢰성이 보장되는 화염 확산을 위해 충분한 열유량을 추진제에 제공해 줄 수 있으며, 고온/고압 환경을 이겨낼 수 있는 구조적 요구사항을 충족시킬 수 있도록 설계되었다. 제작된 점화기는 성능시험을 통해 요구 성능을 만족함을 확인하였다. A pyrotechnic igniter with a relatively simple configuration was developed to secure the stable and reliable ignition of the gas generator in space launch vehicles. It was designed not only to provide a sufficient heat flux for the propellant ignition but also to ensure a structural safety under the conditions of very high temperatures and pressures. The burning tests of the igniters have been performed to decide several design parameters, and consequently the performance tests have proved that the pyrotechnic igniter developed in this study meets the design requirements.
박호준(Ho Jun Park),홍문근(Moongeun Hong),권미라(Mira kwon),이수용(Soo Yong Lee) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.11
파이로스타터는 일종의 가스발생기로써, 내부에 충전되는 저온 고체 추진제의 연소가스를 통해 시동에 필요한 에너지를 터빈에 공급한다. 파이로스타터의 연소관에 충전된 저온 고체추진제를 연소시키기 위한 초기 에너지를 공급해 주기 위해서는 파이로스타터 및 고체추진제의 특성과 형상에 맞는 점화기 설계가 필요하다. 이에 C.B.T 시험을 수행하여 초기 연소실 내부의 충분한 압력 증가를 확보할 수 있는 점화기의 주요 설계 인자를 결정하였다. 파이로스타터의 연계연소시험을 통해 신뢰성 있는 점화 특성을 확인하였고, 점화장약 충전량에 대한 간단한 해석을 수행하였다. A pyrostarter is a sort of gas generator, which supplies the energy to drive turbines by the combustion gas of a solid propellant charged internally. The igniter of the pyrostarter should guarantee the ignition reliability expecially for the solid propellant with a low fame temperature. For the development of the igniter, several closed bomb testes have been performed to decide several design parameters to get a sufficient chamber pressure build-up for the ignition. Moreover, as a result of the firing testes with pyrostarters, the ignition reliability have been verified and the amount of igniter propellants has been reviewed.
차홍석(Hong-Seok Cha),오석진(Seok-Jin Oh),권미라(Mira Kwon) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
유도탄의 가스 사출발사에 적용되는 가스발생기는 초기 발사체의 가속도가 최대 허용 조건 이하를 만족해야 한다. 이에 본 연구에서는 다발형 가스발생기용 복기추진제의 점화에 필요한 충분한 에너지를 공급하면서 초기 점화압력 허용 조건을 만족하는 점화기의 성능 연구를 하였다. 점화제로는 B/KNO3와 MTV점화제를 적용하여 성능을 비교 평가하였다. 이에 가스발생기용 점화제로써 가스 생성률이 낮고 연소시 강력한 복사에너지를 발생하는 MTV 점화제가 선정되었으며, 점화 계열 설계를 통해 가스발생기에 적용되었다. The initial acceleration of the missile must be satisfied with the boundary conditions in the missile cold launching system in which a gas generator is used. In this study, an igniter was designed not only to provide enough energy for the ignition of the bundled double-base propellant, but also to satisfy the limited conditions of the ignition peak pressure in the gas generator. MTV and B/KNO3 were compared in order to find an appropriate ignition agent. MTV, that have lower gas formation and more powerful radiation than the other, was consequently selected and used for the igniter through the design of the ignition train in the gas generator.