http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
방울토마토 생장부 추종 국소난방이 군락 온도분포 및 연료소비에 미치는 영향
권진경(Jin Kyung Kwon),강금춘(Geum Chun Kang),문종필(Jong Pil Moon),이태석(Tae Seok Lee),이수장(Su Jang Lee) (사)한국생물환경조절학회 2015 생물환경조절학회지 Vol.24 No.3
본 연구에서는 동절기 시설원예 난방에너지 절감을 위해 방울토마토의 온도민감부인 생장부를 추종하면서 난방을 수행할 수 있는 국소난방 시스템을 개발하고자 하였다. 방울토마토 생장부 추종형 국소난방시스템은 온실하류로의 균일한 열분배를 위해 내/외부 덕트와 온풍난방기를 연결하는 이중덕트 분배장치, 정식 후 작물 유인에 따라 덕트를 토마토 줄기끝 생장점과 개화화방을 추종하여 상하로 이동시키기 위한 권취장치 등으로 구성되었다. 국소난방 시스템의 운용은 토마토 정식 직후에는 덕트를 작물 상부에 위치시키며 작물 생장에 따라 생장부 국소난방과 차광 회피를 위해 덕트를 상하로 이동시켰다. 방울토마토 수경재배 온실을 대상으로 생장부 국소난방구와 관행의 바닥덕트 난방구에 대해 난방성능과 작물생육 비교시험을 수행하였다. 그 결과 생장부 국소난방구는 야간 난방시간에 작물 군락내 상부 기온이 하부에 비해 0.9~2.0℃ 높으며, 바닥덕트 난방구에 비해 군락상부 기온은 0.3~1.8℃ 높고, 하부 기온은 1.4~1.8℃ 낮게 나타나 온도에 민감한 상부 생장부를 상대적 고온으로 관리하고, 군락하부는 상대적 저온으로 관리 가능하며, 관행 바닥덕트 난방구의 높이별 온도분포를 역전시킬 수 있음을 확인하였다. 토마토 군락에 대한 적외선 열화상 측정을 통해 정식 직후부터 줄기내림 유인재배기간에 걸쳐 생장부 국소난방구는 군락내에 높이별 엽온의 온도성층화를 형성하여 생장부 추종 국소난방이 가능함을 확인하였다. 난방방식별 작물생육 분석결과 초장을 제외한 나머지 항목은 유의적인 차이가 없었으며, 수확량에서도 생장부 국소난방구가 초기 수량이 약간 우세하였으나 총 수확량은 동일한 수준으로 나타났다. 온풍난방비 경유소비량은 생장부 국소난방구가 군락의 높이별 최적 온도관리로 관행 바닥덕트 난방구에 비해 약 23.7% 절감되는 것으로 나타났다. 본 시스템은 길이 90m 온실에 대한 적용시험에서 열분배 성능의 한계로 온실 상/하류간 온도편차가 발생하였으며, 시스템 개선을 위해 내부덕트의 직경 또는 두께 상향, 열복사 억제 재질의 덕트 사용 등 열분배 성능 최적화를 위한 추가연구가 필요한 것으로 판단되었다. Local heating system providing hot air locally to growing parts including shoot apex and flower cluster which were temperature-sensitive organs of cherry tomato was developed to reduce energy consumption for greenhouse heating without decline of crop growth. Growing part following local heating system was composed of double duct distributer which connected inner and outer ducts with hot air heater and winder which moved ducts up and down following growing parts with plant growth. Growing part local heating system was compared with conventional bottom duct heating system with respect to distributions of air and leaf surface temperatures according to height, growth characteristics and energy consumption. By growing part local heating, air temperature around growing part was maintained 0.9~2.0℃ higher than that of lower part of crop and leaf surface temperature was also stratified according to height. Investigations on crop growth characteristics and crop yield showed no statistically significant difference except for plant height between bottom duct heating and growing part local heating. As a result, the growing part local heating system consumed 23.7% less heating energy than the bottom duct heating system without decrease of crop yield.
화력발전소의 온배수를 열원으로 이용하는 시설원예 난방용 히트펌프 시스템의 열교환기 설계기준 설정
유영선(Young Sun Ryou),강연구(Youn Ku Kang),장재경(Jae Kyung Jang),김영화(Young Hwa Kim),김종구(Jong Goo Kim),강금춘(Geum Chun Kang) (사)한국생물환경조절학회 2012 생물환경조절학회지 Vol.21 No.4
본 연구에서는 화력발전소에서 온배수의 형태로 배출되는 폐열을 히트펌프의 열원으로 이용하여 온실의 난방에 활용할 수 있는 히트펌프 시스템을 설계 제작하였으며, 난방 성능을 분석하여 PE 파이프 열교환기의 설계기준을 제시하고자 하였다. PE 파이프 열교환기의 내경은 20㎜, 두께는 2㎜였으며, Roll의 직경은 1,000㎜로 하였다. 연구결과 PE파이프 열교환기의 적정 길이는 1.0RT당 75m로 설계하는 것이 바람직할 것으로 판단되었으며, 이때 히트펌프시스템의 난방성능계수(COPh)는 3.8로 나타났다. This study was carried out in order to determine the optimum length of a roll type PE pipe heat exchanger employed in the water-to-water heat pump system using the waste heat of the heated effluent flowed out from thermal power generation plants as a heat source. And the heat pump system of 30 RT for an experimental test was designed and manufactured. And also PE pipes were employed to recover the waste heat from the heated effluent. The inside diameter of PE pipe heat exchanger was 20 ㎜, the thickness was 2 ㎜ and the diameter of a roll was 1,000 ㎜. And from the results of this study, we found that the optimum length of PE pipe heat exchanger was 75 m per the heat pump capacity of 1.0 RT (3.51 ㎾) and then the heating COP of heat pump system was 3.8.